Ethanol is C2H5OH, a two-carbon alcohol with the condensed structural formula CH3CH2OH. Its structure is an ethyl group (CH3CH2–) bonded to a hydroxyl group (–OH), which makes it a polar, water-miscible solvent and the intoxicating component of alcoholic drinks.
Formula
The molecular formula of ethanol is C2H6O, but the condensed structural formula CH3CH2OH is more informative because it shows the functional group. The formula can be written in several ways:
- Molecular: C2H6O
- Condensed structural: CH3CH2OH or C2H5OH
- Line-angle: a zigzag of two carbons with an –OH attached to one end (often drawn as a triangle-like shape in skeletal formulas)
- SMILES: CCO
Each molecule has 2 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom. The molar mass is 46.07 g/mol (2 × 12.011 + 6 × 1.008 + 15.999). The calculator above uses this mass to convert a given mass of ethanol into molarity when you specify the final solution volume.
Worked Example
Suppose you dissolve 46.07 g of ethanol (exactly one mole) in enough water to make 1000 mL of solution. What is the molarity?
- Convert volume to liters: 1000 mL ÷ 1000 = 1.000 L
- Calculate moles: 46.07 g ÷ 46.07 g/mol = 1.000 mol
- Molarity = moles ÷ liters = 1.000 mol ÷ 1.000 L = 1.000 mol/L
The calculator returns 1.0000 mol/L (1.000 M) and 1000.00 mM. This matches the default values exactly.
Assumptions
- The solute is pure ethanol (100% by mass).
- The final volume is used, not the volume of solvent added (mixing ethanol and water gives a smaller total volume than the sum of the parts).
- Temperature is 25 °C; molarity changes slightly with temperature because volume changes.
- The solution is dilute enough that the density of water is close to 1.00 g/mL.
Background: What Is Ethanol?
Ethanol, also called ethyl alcohol or grain alcohol, is a clear, volatile liquid at room temperature. It is produced naturally by yeast fermenting sugars, which is why it is the active alcohol in beer, wine, and spirits. Industrially, it is made by hydrating ethene (ethylene) or by fermentation followed by distillation. Ethanol is a renewable fuel additive (gasoline blends like E10 or E85) and a common laboratory solvent. Its structure—a short carbon chain with a hydroxyl group—makes it both polar and slightly nonpolar, so it dissolves many organic compounds and mixes completely with water.
How the Structure Determines Its Properties
The –OH group is the key to ethanol’s behavior. The oxygen is electronegative and forms a polar bond with hydrogen, allowing ethanol to form hydrogen bonds with water and with other ethanol molecules. This explains:
- High boiling point: 78.37 °C, much higher than ethane (–89 °C) because of hydrogen bonding.
- Complete miscibility with water: ethanol and water mix in all proportions.
- Solvent power: it dissolves both polar compounds (salts, sugars) and nonpolar ones (oils, resins).
- Hydrogen bonding also affects density: pure ethanol has a density of 0.789 g/mL at 20 °C, less than water.
The two-carbon chain is short, so the nonpolar part is small. Compare with 1-butanol (C4H9OH), which has a longer chain and is only partially miscible with water. Ethanol’s balanced polarity is why it is such a versatile solvent in chemistry and industry.
Common Uses and Why the Formula Matters
Knowing the formula lets you calculate molarity, dilutions, and reaction stoichiometry. For example, in the fermentation reaction:
C6H12O6 → 2 C2H5OH + 2 CO2
One mole of glucose yields two moles of ethanol and two moles of carbon dioxide. If you start with 180.16 g of glucose (1 mol), you can expect up to 92.14 g of ethanol (2 × 46.07 g) if fermentation goes to completion. The formula also helps in preparing ethanol solutions of a given molarity, as the calculator above does.
How to Choose the Right Ethanol Grade
For laboratory work, ethanol comes in several grades. The choice depends on your application:
- Denatured ethanol: contains additives (e.g., methanol, isopropanol) to make it undrinkable; used for cleaning and as a fuel, not for reactions where purity matters.
- 95% ethanol (95:5 ethanol:water): a common azeotrope; good for many extractions and general use.
- Absolute ethanol (99.5%+): low water content; used when water would interfere, such as in Grignard reactions or DNA precipitation.
- HPLC-grade or spectroscopic grade: very pure, low UV absorbance; used for chromatography and spectrophotometry.
Always check the label for water content and denaturants. For dilutions, use the actual purity: if you weigh 50 g of 95% ethanol, you only have 47.5 g of pure ethanol.
Common Problems and Misconceptions
- “Ethanol and methanol are the same” – False. Methanol (CH3OH) is toxic and can cause blindness; it is not the alcohol in drinks.
- “Ethanol is just water with a carbon chain” – The –OH group makes it a weak acid (pKa ~16) and a hydrogen-bond donor, unlike alkanes.
- “Molarity = molality” – Not true. Molarity is moles per liter of solution; molality is moles per kilogram of solvent. For dilute aqueous solutions they are numerically close but not identical.
- “Adding 50 mL ethanol to 50 mL water gives 100 mL” – It actually gives about 96 mL because of volume contraction. Always use a volumetric flask and fill to the mark.
- “Ethanol is a strong electrolyte” – No, it does not dissociate into ions; it is a nonelectrolyte in solution.
Safety and Handling
Ethanol is highly flammable (flash point 13 °C) and should be kept away from open flames and sparks. It is also a central nervous system depressant; ingestion causes intoxication, and excessive consumption can be fatal. In the lab, use it in a fume hood if large volumes are handled, wear gloves and safety glasses, and follow your lab method, the safety data sheet (SDS) and your supervisor. Do not drink laboratory ethanol—it may contain toxic denaturants.
Frequently Asked Questions
What is the difference between ethanol and ethyl alcohol?
They are the same compound. “Ethanol” is the systematic IUPAC name; “ethyl alcohol” is a common name. Both refer to CH3CH2OH.
Is ethanol polar or nonpolar?
Ethanol is polar because of the hydroxyl group. The oxygen atom pulls electron density, creating a dipole. It also has a small nonpolar ethyl group, so it can dissolve both polar and nonpolar substances.
Why is ethanol soluble in water?
The –OH group forms hydrogen bonds with water molecules. The short carbon chain does not disrupt hydrogen bonding enough to prevent mixing, so ethanol and water are miscible in all proportions.
What is the molar mass of ethanol?
The molar mass is 46.07 g/mol, calculated from 2 carbons (24.022), 6 hydrogens (6.048), and 1 oxygen (15.999). This value is used in the calculator above.
Does ethanol have a double bond?
No. The carbon atoms are connected by a single bond (C–C). The double bond is in ethene (C2H4), which is a precursor in industrial ethanol production.
How do you make a 1 M ethanol solution?
Weigh 46.07 g of pure ethanol, transfer it to a 1 L volumetric flask, add some water, swirl, then fill to the 1 L mark with water. The final volume, not the added water volume, determines molarity.
Related
Formula used
in m | Mass of ethanol | g | 46.07 | 0 in mm | Molar mass of ethanol | g/mol | 46.07 | 0.001 in v | Final solution volume | mL | 1000 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works