molecalculator

Moles & Molar Mass

Fahrenheit to Kelvin: Convert °F to K

Calculator No. 01-8782 · Updated · Formula and assumptions shown below

Temperature in Kelvin 293.15 K
Temperature in Celsius
20.00 °C
= (Temperature in °F − 32) × 5÷9
Temperature in °F
68 °F
Set in the form below
You enter
Temperature in °F (°F)
You get
Temperature in Kelvin (K), Temperature in Celsius (°C)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Fahrenheit to Kelvin is a two-step temperature conversion: subtract 32 from the Fahrenheit value, multiply by 5/9 to get Celsius, then add 273.15 to get Kelvin. The formula is K = (°F − 32) × 5/9 + 273.15, and you can use the calculator below to do it instantly.

Formula

The conversion is built from two well-known steps. First, Fahrenheit to Celsius:

°C = (°F − 32) × 5/9

Then Celsius to Kelvin:

K = °C + 273.15

Combined:

K = (°F − 32) × 5/9 + 273.15

  • °F – temperature in degrees Fahrenheit (unit: °F)
  • °C – temperature in degrees Celsius (unit: °C)
  • K – temperature in kelvin (unit: K, no degree symbol)
  • 273.15 – the offset between the Celsius and Kelvin scales, defined as 0 °C = 273.15 K

Kelvin is the SI base unit of thermodynamic temperature. It is an absolute scale, meaning 0 K (absolute zero) is the lowest possible temperature, where molecular motion is minimal. Unlike Fahrenheit or Celsius, Kelvin is never negative.

Worked Example

Convert 68 °F to kelvin using the default value in the calculator.

  1. Start with the Fahrenheit value: 68 °F
  2. Subtract 32: 68 − 32 = 36
  3. Multiply by 5/9: 36 × 5/9 = 20 °C
  4. Add 273.15: 20 + 273.15 = 293.15 K

The calculator shows 293.15 K for 68 °F, which matches. Note that 68 °F is a common room temperature, and 293.15 K is the equivalent in kelvin.

Assumptions

  • The conversion uses the exact defined offset 273.15 K for 0 °C.
  • The formula is linear, so it works for all temperatures above absolute zero (−459.67 °F).
  • No pressure or volume effects are considered; this is a pure scale conversion.

Why Convert Fahrenheit to Kelvin?

Kelvin is the standard unit in science and engineering, especially in physics, chemistry, and thermodynamics. Gas law calculations (like the ideal gas law PV = nRT) require temperature in kelvin because the kelvin scale is absolute – it starts at absolute zero, where gas volume would theoretically be zero. If you use Celsius or Fahrenheit in these equations, you get incorrect results. For example, doubling the temperature in kelvin means doubling the average kinetic energy of molecules, but doubling in Celsius or Fahrenheit does not have that physical meaning.

Converting from Fahrenheit to Kelvin is common when working with American equipment or data that reports in Fahrenheit but needs to be entered into a scientific formula. For instance, if a lab protocol says “heat to 212 °F” and you need to use the ideal gas law, you would convert to 373.15 K.

How to Convert Without a Calculator

You can do the conversion mentally with a good approximation, or exactly with a few steps:

  1. Take the Fahrenheit temperature and subtract 32.
  2. Multiply by 5/9 (or divide by 1.8). This gives Celsius.
  3. Add 273.15 to get kelvin.

For a rough mental estimate, remember that 0 °C = 273.15 K and that each 1 °C is exactly 1 K. So first convert to Celsius, then add 273.15. For example, 100 °F is about 37.8 °C, so about 310.9 K.

Common Mistakes and Misconceptions

  • Forgetting to add 273.15 – Many people convert to Celsius and stop, but kelvin requires the offset. Without it, you are just giving Celsius.
  • Using 273 instead of 273.15 – For most lab work, 273.15 is correct. The value 273.15 is exact by definition of the Celsius scale; 273 is a rounded approximation sometimes used for quick estimates.
  • Writing “degrees Kelvin” – The unit is simply “kelvin” (symbol K), not “degrees Kelvin.” For example, 293.15 K, not 293.15 °K.
  • Confusing kelvin with Celsius in gas laws – Always double-check that your temperature is in kelvin before using R = 8.314 J/(mol·K) or 0.08206 L·atm/(mol·K). A common error is plugging in Celsius, which off by 273.15 and ruins the calculation.
  • Negative kelvin – Kelvin cannot be negative. If your conversion gives a negative value, you likely subtracted incorrectly or used a temperature below absolute zero. Absolute zero is −459.67 °F, so any Fahrenheit value below that is physically impossible.

Comparison with Other Temperature Scales

Fahrenheit, Celsius, and Kelvin are the three most common scales. Fahrenheit is used in the United States for everyday weather and cooking; Celsius is used in most of the world and in science; Kelvin is used in scientific contexts where absolute temperature matters. The Rankine scale is another absolute scale, but it uses Fahrenheit-sized degrees: Rankine = Fahrenheit + 459.67. So 0 °F = 459.67 °R, and absolute zero is 0 °R. Kelvin is more common in SI-based science.

Here is a quick reference for common temperatures:

  • Absolute zero: −459.67 °F = −273.15 °C = 0 K
  • Water freezes: 32 °F = 0 °C = 273.15 K
  • Room temperature (approx.): 68 °F = 20 °C = 293.15 K
  • Human body temperature (approx.): 98.6 °F = 37 °C = 310.15 K
  • Water boils: 212 °F = 100 °C = 373.15 K

Practical Applications

In the lab, you might need to convert Fahrenheit to Kelvin when using American-made ovens, incubators, or water baths that display Fahrenheit but require a kelvin setting for a protocol. For example, a biology protocol might say “incubate at 310 K,” and your water bath reads in Fahrenheit. Convert 310 K to Fahrenheit: first subtract 273.15 to get 36.85 °C, then multiply by 9/5 and add 32 to get about 98.33 °F. The calculator on this page works both ways if you reverse the formula, but for a direct conversion, enter the Fahrenheit value.

In chemistry, gas law problems often give temperatures in °F in older textbooks or industrial data. For instance, if a tank of gas is at 80 °F and you need to find the volume using the ideal gas law, you must convert to kelvin: (80 − 32) × 5/9 = 26.667 °C, plus 273.15 = 299.817 K. Using the calculator, 80 °F gives 299.82 K.

When working with any equipment or chemical process, always follow your lab method, the safety data sheet (SDS), and your supervisor. Temperature conversions are arithmetic, but the actual measurement should be verified with a calibrated instrument.

Frequently Asked Questions

What is the formula to convert Fahrenheit to Kelvin?

The exact formula is K = (°F − 32) × 5/9 + 273.15. First convert to Celsius by subtracting 32 and multiplying by 5/9, then add 273.15.

Why do we add 273.15 instead of 273?

273.15 is the exact defined value for 0 °C in kelvin. Using 273 gives a rounded approximation, but for precise scientific work, 273.15 is required. The difference of 0.15 K can matter in high-precision measurements, though for many everyday calculations 273 is close enough.

Can kelvin be negative?

No. Kelvin is an absolute scale, and 0 K is absolute zero, the lowest possible temperature. Negative kelvin values are physically meaningless. If your conversion gives a negative result, check your arithmetic or the input temperature.

How do I convert kelvin back to Fahrenheit?

Use the reverse formula: °F = (K − 273.15) × 9/5 + 32. For example, 300 K minus 273.15 is 26.85 °C, times 9/5 is 48.33, plus 32 gives 80.33 °F.

Is a kelvin the same size as a degree Celsius?

Yes, one kelvin is exactly equal to one degree Celsius in magnitude. The only difference is the zero point: 0 °C = 273.15 K. So a change of 1 °C is the same as a change of 1 K.

Why is kelvin used in gas laws instead of Fahrenheit?

Gas laws like PV = nRT require an absolute temperature scale because they relate to the kinetic energy of molecules, which is proportional to absolute temperature. Using a scale with negative values (like Fahrenheit or Celsius) would give incorrect results, especially at low temperatures. Kelvin starts at absolute zero, so it is the standard.

Related

Formula used
in f | Temperature in °F | °F | 68 | -459.67
out k | Temperature in Kelvin | K | (f - 32) * 5/9 + 273.15 | 2
out c | Temperature in Celsius | °C | (f - 32) * 5/9 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →