Calculate a radioactive decay constant, λ, from a nuclide’s half-life or from its mean lifetime. Enter the half-life in seconds to get λ in s−1, along with the corresponding mean lifetime and the fraction remaining after one half-life. The formulas assume simple exponential decay of a single radionuclide.
Formula
For exponential radioactive decay, the decay constant is the natural logarithm of 2 divided by the half-life:
λ = ln(2) / t1/2
- λ is the decay constant, measured in inverse units of time. With half-life entered in seconds, λ is in s−1.
- ln(2) is the natural logarithm of 2, approximately 0.6931471806.
- t1/2 is the half-life, the time in which half of the original radioactive nuclei are expected to decay.
The same decay model can be written as N(t) = N0e−λt, where N0 is the initial number of radioactive nuclei, N(t) is the number remaining after elapsed time t, and e is the base of natural logarithms. The activity A, or decay rate, follows the same proportional decrease: A(t) = A0e−λt, provided the sample’s activity comes from that radionuclide.
Time units must match. If the half-life is entered in seconds, λ is per second; if it is expressed in years, λ is per year. Converting the half-life to seconds uses the chosen seconds-per-year convention, so state that convention when precision matters. The calculator uses seconds because they provide an unambiguous SI time unit.
Worked Example
For the default half-life, t1/2 = 3600 s:
- Use λ = ln(2) / t1/2.
- Substitute the values: λ = 0.6931471806 / 3600 s.
- Calculate: λ ≈ 0.0001925408831 s−1, or 1.925409 × 10−4 s−1. Rounded to the calculator’s six decimal places, the displayed value is 0.000193 s−1.
- Mean lifetime: τ = 1 / λ = 1 / 0.0001925408831 s−1 ≈ 5192.956 s, displayed as 5192.9560 s.
- After one half-life, the fraction remaining is e−λt = e−(ln(2)/3600)(3600) = e−ln(2) = 0.5, displayed as 0.5000.
Assumptions
- The decay follows a single exponential process with a constant λ.
- The entered half-life is positive and describes the same radionuclide being considered.
- The fraction output is evaluated at exactly one half-life; it is not a measurement of a particular sample.
- No daughter-product activity, branching details, or changing environmental conditions are included.
What the Decay Constant Means
The decay constant is a probability rate: for any one radioactive nucleus, λ represents its probability of decaying per unit time in the mathematical model. It is not the number of nuclei that must decay in a fixed interval, nor does it predict when a particular nucleus will decay. Individual decay events are random, while the expected number of surviving nuclei in a sufficiently large population follows the exponential law.
A larger λ means faster decay and a shorter half-life. A smaller λ means slower decay and a longer half-life. The relationship is reciprocal through the factor ln(2), not simply λ = 1 / half-life. Confusing those expressions gives a result about 44 percent too high, because ln(2) is approximately 0.693 rather than 1.
Using the Formula With Other Data
If you know the number of nuclei or measured activity at two times, the constant can also be estimated from the exponential decay equation. For measurements N0 at time zero and N(t) at time t:
λ = ln(N0 / N(t)) / t
This version requires positive values and measurements of the same radioactive component. For activity measurements, background radiation, detector efficiency, sample geometry, and contributions from radioactive daughters can affect the observed counts. Correcting these effects is a measurement and analysis task, not something the simple formula performs.
When observations are noisy, estimating λ from several measurements with a suitable statistical fit is generally more reliable than calculating it from just two points. A reported half-life may itself have uncertainty; that uncertainty carries through to λ. For λ = ln(2)/t1/2, a small relative uncertainty in half-life produces approximately the same relative uncertainty in λ, with the direction reversed.
Common Errors and Limits
- Mixing time units: A half-life in days produces a constant per day, not per second. Convert units before comparing constants or combining them in an equation.
- Using the wrong logarithm: The conversion uses the natural logarithm, ln(2), not log10(2).
- Confusing λ with activity: λ has units of inverse time. Activity is measured in decays per second (the becquerel) and depends on how many radioactive nuclei are present: A = λN.
- Treating the average as a schedule: A half-life does not mean every nucleus decays at that time. It describes the expected fraction remaining in a population.
- Ignoring mixtures or daughter products: A sample containing multiple radionuclides can show a curve that is not a single exponential. Each nuclide has its own decay constant.
The equation is appropriate for ordinary radioactive decay under the usual assumption that the nuclide’s decay probability per unit time is constant. It does not identify an unknown isotope, correct a measurement, or determine how a material should be handled. Follow applicable radiation-safety rules and qualified institutional guidance when dealing with radioactive materials.
Frequently Asked Questions
What is the formula for the decay constant?
For a known half-life, use λ = ln(2) / t1/2. The half-life and resulting decay constant must use consistent time units.
What are the units of the decay constant?
Its unit is inverse time, such as s−1, min−1, or year−1. The unit follows from the time unit used in the half-life.
Is the decay constant the inverse of the half-life?
Not exactly. λ = ln(2)/t1/2; the natural-log factor is essential. The inverse half-life is related but larger than λ.
How do I calculate half-life from the decay constant?
Rearrange the formula: t1/2 = ln(2)/λ. Use the time unit reciprocal to the unit of λ; for example, λ in s−1 gives a half-life in seconds.
How is decay constant different from mean lifetime?
The mean lifetime τ is 1/λ, while the half-life is ln(2)/λ. Both describe the same exponential process, but they are different time measures.
Related
Formula used
in t | Half-life | s | 3600 | 0 out lam | Decay constant | s^-1 | ln(2) / t | 6 out tau | Mean lifetime | s | 1 / lam | 4 out frac | Fraction remaining after one half-life | - | exp(-lam * t) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Cell Culture Doubling Time Equation and Calculator24.00 h
- Cell Culture Seeding Density Calculator and Formula4,000.00 cells/cm^2
- Cell Culture Doubling Time Calculator and Formula24.00 h
- CFU From Dilution: Calculate Colony-Forming Units10,000,000 CFU/mL
- Cell Culture Doubling Time Calculator and Formula24.00 h
- Zero Order Release Kinetics Calculator and Explanation5.000 mg/h