Free energy calculations estimate how much energy in a system is available to do useful work under specified conditions, and whether a process is thermodynamically favorable. This calculator finds the Gibbs free-energy change, ΔG, from enthalpy change, ΔH, temperature, and entropy change, ΔS; it returns ΔG in joules per mole and kilojoules per mole.
Formula
For a process at constant temperature and pressure, Gibbs free-energy change is calculated as:
ΔG = ΔH − TΔS
- ΔG is the Gibbs free-energy change, in kJ/mol in the calculator’s first result.
- ΔH is the enthalpy change, entered in kJ/mol.
- T is the absolute temperature, entered in kelvin (K).
- ΔS is the entropy change, entered in J/(mol·K).
Because ΔH is entered in kJ/mol while TΔS is initially in J/mol, the formula divides TΔS by 1000 to convert joules to kilojoules: ΔG (kJ/mol) = ΔH − T × ΔS / 1000. The second output converts the answer back to joules per mole by multiplying by 1000. Use consistent signs and units: enthalpy and entropy changes may be positive or negative, but temperature in kelvin cannot be negative.
Worked Example
Using the calculator’s default values, ΔH = −10 kJ/mol, T = 298.15 K, and ΔS = 20 J/(mol·K):
TΔS = 298.15 × 20 = 5963 J/mol
Convert the entropy term to kilojoules: 5963 / 1000 = 5.963 kJ/mol.
ΔG = −10 − 5.963 = −15.9630 kJ/mol.
The second output is −15.9630 × 1000 = −15963.0 J/mol. The negative sign indicates that, for the stated conditions and the defined direction of the process, the change is thermodynamically favorable. It does not say how quickly the process occurs.
Assumptions
- The quantity is Gibbs free-energy change at constant temperature and pressure.
- ΔH and ΔS refer to the same process, direction, and basis, such as per mole of reaction as written.
- Inputs are treated as applicable at the entered temperature; the calculator does not adjust them for temperature dependence.
- This is a thermodynamic calculation, not a prediction of reaction rate or a substitute for experimental measurements.
What Free Energy Means
“Free energy” is not a separate supply of energy that can be extracted without limits. It is a thermodynamic state function that helps describe the energy available to drive change under particular constraints. In chemistry, Gibbs free energy is especially useful for processes at constant temperature and pressure, common conditions for reactions in open laboratory environments.
The word “change” matters. A value of ΔG describes a transition between specified initial and final states, not the total energy held by a substance. The reaction equation, its direction, temperature, pressure, and physical states all matter. If a reaction is reversed, the signs of ΔH, ΔS, and ΔG reverse. If the balanced equation is multiplied by a factor, its extensive changes are multiplied by that same factor.
How to Interpret ΔG
- ΔG < 0: The forward change is thermodynamically favorable under the stated conditions.
- ΔG > 0: The forward change is unfavorable as written; the reverse direction is favored under those conditions.
- ΔG = 0: The system is at equilibrium for the specified conditions, in the thermodynamic sense.
Favorable does not mean instantaneous, guaranteed, or complete. A reaction can have a negative ΔG and still proceed very slowly because it faces a kinetic barrier. A catalyst can change the rate by providing a different pathway, but it does not change the equilibrium ΔG for the same overall process and conditions.
The calculator uses the supplied ΔH and ΔS directly. For a reaction mixture away from standard conditions, the actual Gibbs-energy change depends on composition as well as temperature. For a reaction, the relation is commonly written ΔG = ΔG° + RT ln Q, where ΔG° is the standard reaction free-energy change, R is the gas constant, T is kelvin, and Q is the reaction quotient formed from activities (often approximated with concentrations or partial pressures in suitable dilute or ideal cases). This calculator does not evaluate Q or ΔG°.
Temperature and Spontaneity
The equation shows how enthalpy and entropy compete. A negative ΔH favors a negative ΔG; a positive ΔS also favors a negative ΔG because the entropy term is subtracted. The temperature multiplies the entropy contribution, so its influence can become greater at higher temperatures.
For example, when ΔH is positive and ΔS is positive, the process can be unfavorable at low temperature but favorable above the crossover temperature T = ΔH/ΔS. That calculation requires compatible units; if ΔH is in kJ/mol and ΔS in J/(mol·K), convert ΔH to J/mol first. The crossover is meaningful only when the values are suitable for the temperature range and the process conditions. Enthalpy and entropy can vary with temperature, so treating them as constant may be an approximation.
Common Errors and Limits
- Mixing joules and kilojoules: A common thousand-fold error is subtracting TΔS in J/mol directly from ΔH in kJ/mol. This calculator explicitly divides by 1000.
- Using Celsius: Convert temperature to kelvin before multiplying by entropy. The calculator accepts K, not °C.
- Ignoring signs: Keep the signs attached to both ΔH and ΔS. A negative entropy change makes −TΔS positive, not negative.
- Comparing different reaction bases: Ensure both changes are per mole of the same reaction as written. Stoichiometric scaling changes the reported value.
- Confusing favorability with speed: ΔG describes thermodynamic direction, not activation energy or reaction kinetics.
Reliable inputs depend on the substance, phase, pressure, temperature, and reference state. Values from tables may be standard-state values and may not match a particular mixture. The simple equation also assumes the stated ΔH and ΔS apply at the chosen temperature; when heat capacities or changing conditions matter, a more complete thermodynamic treatment is needed.
Frequently Asked Questions
What does a negative ΔG mean?
A negative Gibbs free-energy change means the forward process is thermodynamically favorable under the conditions represented by the inputs. It does not specify how fast the process happens.
Is free energy the same as enthalpy?
No. At constant temperature and pressure, Gibbs free-energy change combines enthalpy and entropy: ΔG = ΔH − TΔS. Entropy can change whether a process is favorable even when its enthalpy change alone suggests otherwise.
Can ΔG be calculated in joules or kilojoules?
Yes. The calculator reports both J/mol and kJ/mol. Keep ΔH, T, and ΔS in compatible units during manual calculations, converting J to kJ by dividing by 1000.
Does negative ΔG mean a reaction is spontaneous?
It means the forward direction is thermodynamically favored under the stated conditions. “Spontaneous” does not mean fast, and the result can change with temperature, pressure, or mixture composition.
What is the difference between ΔG and ΔG°?
ΔG refers to the actual conditions and composition, while ΔG° is defined for standard-state reference conditions. For reactions away from those conditions, composition contributes through the reaction quotient.
Why does temperature have to be in kelvin?
The thermodynamic equation uses absolute temperature. Kelvin starts at absolute zero, making it the appropriate scale for the TΔS term; Celsius values cannot be substituted directly.
Related
Formula used
in dh | Enthalpy change ΔH | kJ/mol | -10 | - in temp | Temperature T | K | 298.15 | 0 in ds | Entropy change ΔS | J/(mol·K) | 20 | - out dg | Gibbs free-energy change ΔG | kJ/mol | dh - temp * ds / 1000 | 4 out gj | Gibbs free-energy change ΔG | J/mol | dg * 1000 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Pressure Density Depth Formula for Fluids98,066 Pa
- Pressure Density Temperature Equation Calculator100,961.74 Pa
- Pressure Density Cup: What It Measures and How It Works1.0000 g/mL
- Pressure, Density, and Temperature: How They Relate101,307 Pa
- Pressure-Based vs Density-Based Solvers in CFD
- Fluent Pressure-Based or Density-Based Solver?