This free radioactive decay calculator works out how much of a radioactive isotope remains after a given time, or how long it takes to decay to a given amount, using the half-life you enter. You input the initial amount, the half-life, and the elapsed time, and you get back the remaining amount, the fraction left, and the activity in becquerels. It is a straightforward implementation of the exponential decay law, with no sign-up and no cost.
Formula
The decay of a radioactive substance follows first-order kinetics. The amount remaining after time t is given by:
N(t) = N0 × (1/2)t / T1/2
where:
- N0 is the initial amount (in grams, moles, or number of atoms – any unit works as long as you are consistent).
- T1/2 is the half-life (in seconds, minutes, hours, or any time unit – again, consistency is key).
- t is the elapsed time (same unit as the half-life).
The fraction remaining is simply (1/2)t/T1/2. The activity (decays per second, or becquerels, Bq) is related to the number of atoms and the decay constant λ = ln(2)/T1/2. To get activity from a mass in grams, you need the molar mass of the isotope (the calculator uses a fixed value of 1 g/mol for the default, which is not physically meaningful – for a real isotope, replace the molar mass in the activity expression with the actual value, e.g., 137 for cesium-137).
Worked Example
Using the default values: initial amount = 10 g, half-life = 3600 s (1 hour), elapsed time = 7200 s (2 hours).
Fraction remaining = 0.57200/3600 = 0.52 = 0.25.
Remaining amount = 10 g × 0.25 = 2.5 g.
Activity: first, find the number of atoms. If the isotope had a molar mass of 1 g/mol (which is not a real isotope, but for this example), 10 g would be 10 moles, or 10 × 6.02214076×1023 = 6.022×1024 atoms. After 2 hours, 25% remain, so 1.506×1024 atoms. The decay constant λ = 0.693 / 3600 s = 1.925×10−4 s−1. Activity = 1.506×1024 × 1.925×10−4 = 2.90×1020 Bq. The calculator shows 2.90×1020 Bq (displayed as 2.90e20).
Assumptions
- The decay follows a single exponential (no daughter products affecting the measurement).
- The half-life is constant – it does not change with temperature, pressure, or chemical state.
- The initial amount is pure isotope, not a compound.
- The activity calculation assumes a molar mass of 1 g/mol for the default – for a real isotope, you must enter the correct molar mass in the formula (the calculator here uses a placeholder).
How to Choose a Radioactive Decay Calculator
Most free online calculators fall into three types:
- Simple half-life calculators – you enter initial amount, half-life, and time; they give remaining amount and fraction. These are fine for homework or quick estimates.
- Activity calculators – they also compute decays per second (Bq or Ci). These need the molar mass or the number of atoms, not just mass.
- Multi-isotope tools – some let you pick from a list of common isotopes (C-14, U-238, I-131) and fill in the half-life automatically. These are convenient but only as good as their data.
For serious work, use a calculator that lets you specify the half-life yourself, because the half-life of an isotope is a measured value with uncertainty – and different sources may quote slightly different numbers. Always check the half-life value against a reliable reference (e.g., the National Nuclear Data Center).
Common Mistakes and How to Avoid Them
The most frequent error is mixing time units. If the half-life is in years and the elapsed time is in days, you must convert one to the other before using the formula. For example, carbon-14 has a half-life of 5730 years. If you want to know how much remains after 1000 years, use t = 1000 and T1/2 = 5730 – both in years. If you instead use t = 365,000 days, you must also convert the half-life to days (5730 × 365.25 ≈ 2,092,000 days).
Another common mistake is confusing the decay constant λ with the half-life. λ = ln(2)/T1/2. The decay equation can also be written as N(t) = N0e−λt. Both forms are correct; just do not mix them up.
Rounding too early is also a trap. If you round the fraction remaining to 0.3 instead of 0.25, your final mass will be off. Keep at least three significant figures until the final step.
Real-World Applications and Context
Radioactive decay calculations are used in many fields:
- Carbon dating – measuring the remaining C-14 in organic material to estimate its age. The half-life of C-14 is 5730 years.
- Nuclear medicine – determining how long a radioactive tracer remains active in the body. For example, iodine-131 has a half-life of 8.02 days, so a dose decays to half in about a week.
- Geology – using uranium-lead or potassium-argon decay to date rocks. These have half-lives in the billions of years.
- Waste management – estimating how long spent nuclear fuel must be stored before its activity drops to safe levels.
In each case, the same exponential formula applies. The only difference is the half-life and the initial amount.
Costs and Availability
Many radioactive decay calculators are free online, including this one. Some scientific software packages (like MATLAB or Mathematica) have built-in functions, but those are expensive. For occasional use, a free web tool is sufficient. If you need to do many calculations with precise half-lives, a spreadsheet with the formula is just as good – you can enter the half-life and time in separate cells and use the power function.
Safety and Accuracy Notes
This calculator is for educational and planning purposes only. It does not account for shielding, biological effects, or regulatory limits. If you are working with radioactive materials, follow your lab method, the safety data sheet (SDS) and your supervisor. The activity value is theoretical – real sources have impurities, and detectors measure activity with efficiency factors. Always consult a qualified health physicist for any application involving human exposure or environmental release.
Frequently Asked Questions
What is the difference between half-life and decay constant?
The half-life (T1/2) is the time for half the atoms to decay. The decay constant (λ) is the probability per unit time that a given atom will decay. They are related by λ = ln(2)/T1/2. Both describe the same process; the half-life is more intuitive, while the decay constant appears in the exponential equation.
Can I use this calculator for any isotope?
Yes, as long as you know the half-life. The formula is universal for any radioactive isotope that decays by a single exponential process. For isotopes with multiple decay paths (branches), the total half-life still applies, but the activity calculation may need branching ratios.
Why does the activity calculation need molar mass?
Activity is the number of decays per second, which depends on the number of atoms present. If you start with a mass in grams, you need to convert to moles (divide by molar mass) and then to atoms (multiply by Avogadro’s number). The calculator here uses a placeholder molar mass of 1 g/mol, so for a real isotope you must adjust the expression to use the correct molar mass.
What units should I use for time?
Any units, as long as the half-life and elapsed time are the same. Seconds, minutes, hours, days, or years all work. The calculator does not care, but you must enter both in the same unit to get a correct result.
Is the decay rate affected by temperature or pressure?
For most isotopes, no. Nuclear decay is a property of the nucleus and is essentially independent of chemical environment, temperature, or pressure. There are extremely rare exceptions for electron capture isotopes where chemical state can slightly alter the half-life, but these are negligible for typical calculations.
How do I convert activity from becquerels to curies?
One curie (Ci) is exactly 3.7×1010 becquerels. So divide the activity in Bq by 3.7×1010 to get Ci. For example, 1 μCi = 37,000 Bq.
Related
Formula used
in m | Initial amount | g | 10 | 0 in t | Half-life | s | 3600 | 0 in time | Elapsed time | s | 7200 | 0 out rem | Remaining amount | g | m * 0.5^(time / t) | 4 out frac | Fraction remaining | - | 0.5^(time / t) | 4 out act | Activity | Bq | (m / 0.00000000000000000000000166053906660) * (0.693 / t) * 0.5^(time / t) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED