molecalculator

Moles & Molar Mass

FTE Equivalent Calculator: How to Compute Full-Time Equivalents

Calculator No. 01-8466 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

An FTE (full-time equivalent) calculator converts the total hours worked by part-time and full-time staff into the number of full-time employees they represent. You enter the number of employees and their weekly or annual hours, and the calculator returns the FTE value, typically as a decimal like 2.5, meaning the workload equals 2.5 full-time positions.

Formula

The basic FTE formula is:

FTE = (Number of employees × Hours worked per employee per period) ÷ Standard full-time hours per period

Where:

  • Number of employees – the count of people in the group (unit: persons).
  • Hours worked per employee – the average or actual hours one employee works in a week, month, or year (unit: hours).
  • Standard full-time hours – the hours that define one full-time position in your organization (unit: hours per same period). Commonly 40 hours per week, 173.33 hours per month, or 2,080 hours per year.

The result is a dimensionless number. An FTE of 1.0 equals one full-time employee; 0.5 equals a half-time employee.

Worked Example

Using the calculator defaults: 5 employees each working 40 hours per week, with a standard full-time week of 40 hours.

  1. Total hours worked per week = 5 × 40 = 200 hours.
  2. Divide by standard full-time hours: 200 ÷ 40 = 5.0 FTE.
  3. Annual FTE hours = 5.0 × 52 = 260 hours per year.

The calculator shows 5.00 FTE, which matches. In this case, all employees are full-time, so the FTE equals the headcount.

Assumptions

  • All employees work the same number of hours per week (if not, use the average).
  • Overtime is not counted – FTE typically uses scheduled or contracted hours, not actual overtime.
  • The standard full-time week is constant across the organization.
  • No allowance for paid leave, holidays, or sick days – FTE is based on working hours, not paid hours.

Why FTE Matters

FTE is a standard metric in human resources, budgeting, and project management. It allows organizations to compare staffing levels across departments, calculate labor costs, and determine eligibility for benefits or government programs. For example, the Affordable Care Act in the United States uses FTE to define whether an employer is “large” (50 or more FTEs). In education, FTE measures student enrollment – one full-time student equals 1.0 FTE, and part-time students count proportionally.

FTE also helps with workload planning. If a project requires 2,080 hours of work in a year, that equals 1.0 FTE (assuming 2,080 standard hours). If you have four part-time employees each working 20 hours per week, their combined FTE is 4 × 20 ÷ 40 = 2.0 FTE.

How to Choose the Right Standard Hours

The standard full-time hours vary by country, industry, and company policy. Common standards:

  • 40 hours per week – typical in the United States and many corporate roles.
  • 37.5 hours per week – common in some professional and government roles.
  • 35 hours per week – used in some European countries and part-time definitions.
  • 2,080 hours per year – 52 weeks × 40 hours, often used for annual calculations.
  • 1,920 hours per year – 48 working weeks × 40 hours, after subtracting 4 weeks of vacation.

Always use the same period for both the hours worked and the standard hours. If you mix weekly hours with annual standards, the result will be wrong. For instance, if employees work 40 hours per week and your standard is 2,080 hours per year, convert the weekly hours to annual: 40 × 52 = 2,080, then divide by 2,080 = 1.0 FTE.

Common Mistakes and Misconceptions

  • Mixing periods – using weekly hours with a monthly standard. Always align the time unit.
  • Counting headcount instead of hours – 10 part-time employees are not 10 FTE if they work 20 hours each; they are 5 FTE.
  • Including overtime – FTE is based on scheduled hours, not overtime. Overtime distorts the comparison.
  • Rounding too early – round the final FTE to two decimals, not intermediate steps. For example, 3 employees × 37.5 hours ÷ 40 = 2.8125, which rounds to 2.81 FTE.
  • Assuming FTE equals headcount – FTE is a measure of workload, not people. One person can be 1.0 FTE, and two half-time people also total 1.0 FTE.

FTE for Annual or Monthly Periods

Sometimes you need FTE for a month or a year, not a week. The formula is the same, but you must use the total hours in that period. For example:

  • Monthly FTE: total hours worked in the month ÷ standard monthly hours (e.g., 173.33 hours for 40-hour weeks).
  • Annual FTE: total hours worked in the year ÷ 2,080 (if standard is 40 hours/week).

If you have 3 part-time employees working 25 hours per week each, their weekly FTE is 3 × 25 ÷ 40 = 1.875. Over a year (52 weeks), they contribute 1.875 × 52 = 97.5 FTE-weeks, or 97.5 ÷ 52 = 1.875 annual FTE. The annual FTE is the same as the weekly FTE when the standard is consistent.

Limitations of the FTE Calculator

This calculator assumes a uniform standard and equal hours per employee. In reality, employees may have different schedules, and the standard may change over time. For accurate budgeting, you may need to calculate FTE per department or per project separately. Also, FTE does not account for productivity, skill level, or the quality of work – it is purely a measure of time. For labor cost estimation, multiply FTE by the average salary and benefits, but remember that part-time employees may have different benefit costs.

Frequently Asked Questions

How do I calculate FTE for a part-time employee?
Divide the employee’s scheduled hours per week by the standard full-time hours. For example, 20 hours ÷ 40 hours = 0.5 FTE.

What is the difference between FTE and headcount?
Headcount is the number of people, regardless of hours. FTE is the equivalent number of full-time positions. Two half-time employees count as 2 headcount but 1.0 FTE.

Can FTE be greater than the number of employees?
Yes, if employees work more than the standard hours (e.g., overtime) or if you include multiple part-time workers whose combined hours exceed one full-time equivalent. However, most organizations cap FTE at 1.0 per employee for reporting purposes.

What does 0.5 FTE mean?
It means half of a full-time workload, typically 20 hours per week if full-time is 40 hours. It does not mean the employee works exactly half the days – it is based on hours.

How do I convert annual hours to FTE?
Divide the total annual hours worked by the annual standard (e.g., 2,080 hours). For instance, an employee working 1,560 hours per year is 1,560 ÷ 2,080 = 0.75 FTE.

Do I include paid time off in FTE?
No, FTE is based on scheduled working hours, not paid hours. Paid vacation or sick leave does not change the FTE calculation unless you are calculating cost, where you might include benefits.

Alternatives to FTE

If FTE does not fit your needs, consider other metrics:

  • Headcount – simple count of employees, useful for benefits eligibility.
  • Total labor hours – raw hours, useful for scheduling and overtime tracking.
  • Full-time ratio – percentage of employees working full-time, useful for workforce composition.
  • Productivity per employee – output divided by headcount, useful for performance.

FTE remains the most common for budgeting and comparative analysis because it normalizes part-time work into a single number.

Related

Formula used
in h | Weekly hours per employee | h | 40 | 0
in e | Number of employees | - | 5 | 0
in s | Standard full-time hours per week | h | 40 | 1
out fte | Full-time equivalents | - | e * h / s | 2
out fte_annual | Annual FTE (52 weeks) | h | fte * 52 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →