molecalculator

Moles & Molar Mass

Full Electron Configuration of N (Nitrogen)

Calculator No. 01-9642 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The full electron configuration of nitrogen (N, atomic number 7) is 1s2 2s2 2p3. This means nitrogen has two electrons in the 1s orbital, two in the 2s orbital, and three in the 2p orbitals, totaling seven electrons. This configuration is the foundation for understanding nitrogen’s chemical behavior, including its triple bond in N2 and its role in biological and industrial chemistry.

Formula

The electron configuration is built by filling orbitals in order of increasing energy, following the Aufbau principle, Pauli exclusion principle, and Hund’s rule. The order of orbital filling is given by the diagonal (Madelung) rule:

1s → 2s → 2p → 3s → 3p → 4s → 3d → 4p → 5s → 4d → 5p → 6s → 4f → 5d → 6p → 7s → 5f → 6d → 7p

Each orbital holds a maximum of two electrons (Pauli exclusion). For nitrogen (Z = 7), the first two electrons fill 1s, the next two fill 2s, and the remaining three go into the three 2p orbitals. According to Hund’s rule, each 2p orbital gets one electron before any pairing occurs, so the 2p subshell is half-filled (one electron in each of 2px, 2py, 2pz).

In the calculator above, you enter the atomic number Z, and it outputs the full configuration, the noble-gas core abbreviation, and the number of valence electrons. For Z = 7, the configuration is 1s2 2s2 2p3, the core is [He] 2s2 2p3, and the valence electrons are 5 (2s2 + 2p3).

Worked Example

Let’s work through the default value: Z = 7 (nitrogen).

  1. Start with the 1s orbital: it holds 2 electrons → 1s2 (total 2).
  2. Next, the 2s orbital: holds 2 electrons → 2s2 (total 4).
  3. Remaining electrons: 7 – 4 = 3. These go into the 2p orbitals: 2p3 (total 7).

So the full configuration is 1s2 2s2 2p3. The noble-gas core is [He] (since helium has 1s2), giving [He] 2s2 2p3. The valence electrons are those in the outermost shell (n=2): 2s2 + 2p3 = 5 electrons.

Assumptions

  • The Aufbau principle assumes the ground state (lowest energy) of the atom.
  • The Madelung rule is an approximation; for some transition metals, the actual order can differ slightly, but for nitrogen it is exact.
  • The configuration applies to a neutral, isolated atom in the gas phase. In molecules or solids, the electron distribution may be modified.

Background: Why Nitrogen’s Configuration Matters

Nitrogen sits in group 15 (the pnictogens) and period 2 of the periodic table. Its electron configuration explains its key properties:

  • Valence electrons: 5 valence electrons (2s2 2p3) mean nitrogen needs 3 more electrons to achieve a stable octet, leading to a -3 oxidation state in many compounds (e.g., NH3, nitrides).
  • Triple bond: The three unpaired 2p electrons allow nitrogen to form a triple bond in N2, one of the strongest bonds in nature (bond energy ≈ 941 kJ/mol). This makes N2 very inert, which is why nitrogen gas is used as an inert atmosphere in chemistry.
  • Electronegativity: Nitrogen has a high electronegativity (3.04 on the Pauling scale), which it owes to its half-filled 2p subshell and small atomic radius.

How to Read the Configuration

Each part of the notation has a specific meaning:

  • Number (1, 2, 3…): principal quantum number (n), indicating the energy level/shell.
  • Letter (s, p, d, f): subshell type, which determines the shape of the orbital (s = spherical, p = dumbbell-shaped).
  • Superscript: the number of electrons in that subshell.

For nitrogen, 1s2 means 2 electrons in the 1s subshell, and so on. The sum of all superscripts equals the atomic number (2+2+3=7).

Common Mistakes and Misconceptions

  • Confusing valence with total electrons: Valence electrons are only the outermost shell (n=2 for nitrogen), not all electrons. Nitrogen has 5 valence electrons, not 7.
  • Incorrect orbital filling order: Some students fill 2p before 2s, but the Aufbau principle requires 2s to fill first (lower energy).
  • Pairing electrons prematurely: Hund’s rule says electrons occupy each orbital singly before pairing. So 2p3 means one electron in each of the three p orbitals, not a pair and a single.
  • Using the noble-gas core incorrectly: The core is the configuration of the previous noble gas. For nitrogen, the previous noble gas is helium (1s2), not neon.

How to Choose the Right Notation

There are several ways to write an electron configuration, and the choice depends on context:

  • Full configuration: Best for showing all electrons, useful for understanding the entire atom.
  • Noble-gas core (abbreviated): Shorter and highlights valence electrons, which are the ones involved in bonding.
  • Orbital diagram: Shows each orbital as a box with arrows, illustrating spin and Hund’s rule. For nitrogen: 1s (↑↓), 2s (↑↓), 2p (↑ ↑ ↑).
  • Spectroscopic notation: Sometimes used in physics, but not common in general chemistry.

For most chemical purposes, the noble-gas core is preferred because it focuses on the valence shell. For example, [He] 2s2 2p3 immediately shows that nitrogen has 5 valence electrons and will likely form three bonds.

Limits of the Aufbau Principle

The Aufbau principle works perfectly for nitrogen, but it has exceptions for some transition metals and lanthanides. For example, chromium (Z=24) has a configuration of [Ar] 3d5 4s1 instead of [Ar] 3d4 4s2 because a half-filled d subshell is more stable. Similarly, copper is [Ar] 3d10 4s1. These exceptions arise from the extra stability of filled or half-filled subshells. For nitrogen, no such exception exists, but it’s important to know that the simple rules don’t always hold.

Comparison with Other Elements

Nitrogen’s configuration is the first half-filled p-block configuration. Its neighbors:

  • Carbon (Z=6): 1s2 2s2 2p2 – two unpaired p electrons, forms four bonds.
  • Oxygen (Z=8): 1s2 2s2 2p4 – one pair and two unpaired electrons, forms two bonds.
  • Phosphorus (Z=15): [Ne] 3s2 3p3 – same valence pattern as nitrogen, but in period 3, so it can use d orbitals to form five bonds (e.g., PCl5).

Nitrogen cannot form five bonds because it lacks d orbitals, which is why compounds like NF5 do not exist.

Frequently Asked Questions

What is the electron configuration of N3-?

The nitride ion (N3-) has 10 electrons (7 + 3). Its configuration is 1s2 2s2 2p6, which is the same as neon. This gives it a stable octet and a noble-gas configuration.

Why does nitrogen have a half-filled 2p subshell?

According to Hund’s rule, electrons fill degenerate orbitals (same energy) singly before pairing, because this minimizes electron-electron repulsion. For nitrogen, the three 2p electrons occupy the three p orbitals individually, resulting in a half-filled subshell, which is particularly stable due to exchange energy and symmetry.

How many unpaired electrons does nitrogen have?

Nitrogen has three unpaired electrons in its ground state. These are the three 2p electrons. This is why nitrogen typically forms three covalent bonds, as in ammonia (NH3) or nitrogen gas (N≡N).

Is nitrogen’s configuration paramagnetic or diamagnetic?

Because nitrogen has unpaired electrons (three in 2p), it is paramagnetic in its atomic state. However, molecular nitrogen (N2) is diamagnetic because all electrons are paired in the molecular orbitals.

What is the difference between full and noble-gas configuration?

The full configuration lists every electron, while the noble-gas configuration uses the previous noble gas as a shorthand for the core electrons. For nitrogen, full is 1s2 2s2 2p3, and noble-gas is [He] 2s2 2p3. The noble-gas notation is shorter and emphasizes the valence electrons.

Can nitrogen have an expanded octet?

No. Nitrogen is in period 2 and has no d orbitals available for bonding. It cannot accommodate more than 8 electrons in its valence shell. This is why compounds like NF5 are not stable, unlike phosphorus, which can form PCl5.

Related

Formula used
in z | Atomic number (Z) | - | 7 | 1 | 118
out config | Full electron configuration | - | "1s^2 2s^2 2p^3" | 0
out core | Noble-gas core (abbreviated) | - | "[He] 2s^2 2p^3" | 0
out valence | Valence electrons | - | 5 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →