The full structural formula of ethanol is CH3CH2OH, showing a two-carbon chain with a hydroxyl group (–OH) attached to one of the carbons. This condensed formula explicitly reveals the connectivity: a methyl group (CH3) bonded to a methylene group (CH2), which is in turn bonded to the oxygen of the hydroxyl group.
Formula
The condensed structural formula CH3CH2OH is the most common way to write ethanol. It shows the order of atoms: the first carbon (C1) is bonded to three hydrogen atoms, the second carbon (C2) is bonded to two hydrogen atoms and one oxygen atom, and the oxygen is bonded to one hydrogen atom. The molecular formula is C2H6O, which gives only the atom counts, not the connectivity. The full structural formula can also be drawn as a Lewis structure or a skeletal structure, but the condensed form CH3CH2OH is universally understood by chemists.
In the Lewis structure, each line represents a pair of shared electrons. The C–C bond is a single bond, each C–H bond is single, the C–O bond is single, and the O–H bond is single. The oxygen atom has two lone pairs of electrons, which give the hydroxyl group its polar character and its ability to form hydrogen bonds.
Worked Example
Suppose you want to prepare 1.000 L of a 1.000 mol/L ethanol solution. Using the calculator above with the default mass of 46.07 g (which is exactly one mole of ethanol, since its molar mass is 46.07 g/mol):
- Convert the volume from mL to L: 1000 mL = 1.000 L.
- Calculate the number of moles: n = mass / molar mass = 46.07 g / 46.07 g/mol = 1.000 mol.
- Calculate molarity: c = n / V = 1.000 mol / 1.000 L = 1.000 mol/L.
The calculator gives 1.0000 mol/L, matching the manual calculation.
Assumptions
- The molar mass of ethanol is taken as 46.07 g/mol (C: 12.011 × 2 + H: 1.008 × 6 + O: 15.999 = 46.069 ≈ 46.07).
- The solution is assumed to be at room temperature; volume changes with temperature are ignored.
- When preparing a solution, the final volume is assumed to be exactly the stated volume after mixing (not the volume of solvent added).
Why the Structural Formula Matters
The structural formula is not just a drawing; it determines the chemical behavior. Ethanol is a polar molecule because the oxygen atom is electronegative, creating a partial negative charge on oxygen and partial positive charges on the hydrogens. This polarity allows ethanol to dissolve in water (a polar solvent) and also in nonpolar solvents like hexane, making it a versatile solvent in the lab. The –OH group also makes ethanol a weak acid (pKa ≈ 16), though it is far less acidic than water (pKa ≈ 14). The presence of the hydroxyl group allows ethanol to participate in hydrogen bonding, which gives it a higher boiling point (78.37 °C) than alkanes of similar molar mass (propane boils at −42 °C).
In organic chemistry, the structural formula helps predict reaction pathways. For example, the –OH group can be protonated and then displaced by a nucleophile (as in the formation of ethyl bromide from ethanol and HBr). The C–H bonds adjacent to the hydroxyl group are slightly more reactive toward oxidation, which is why ethanol can be oxidized to acetaldehyde and then to acetic acid.
How to Read the Condensed Formula
When you see CH3CH2OH, read it from left to right: a carbon with three hydrogens, then a carbon with two hydrogens, then an oxygen with one hydrogen. The bond between the two carbons is implied. Sometimes it is written as C2H5OH, which is also correct but less explicit about the chain. The formula CH3CH2OH is unambiguous: it cannot be confused with the isomer dimethyl ether (CH3OCH3), which has the same molecular formula C2H6O but different connectivity and vastly different properties (dimethyl ether is a gas at room temperature).
Common Mistakes and Misconceptions
- Confusing molecular and structural formulas: C2H6O does not tell you which isomer you have; you need the structural formula.
- Drawing the oxygen in the middle: Writing CH3OCH3 is dimethyl ether, not ethanol. The oxygen must be at the end of the chain in ethanol.
- Forgetting the lone pairs: The oxygen has two lone pairs, which are often omitted in condensed formulas but are crucial for understanding hydrogen bonding.
- Assuming ethanol is an acid strong enough to react with metals: Ethanol is a very weak acid; it does not react with copper or zinc under normal conditions, but it does react with sodium metal to produce sodium ethoxide and hydrogen gas.
Frequently Asked Questions
What is the difference between C2H5OH and CH3CH2OH?
They are the same compound. C2H5OH is a shorthand that groups the two carbons together, while CH3CH2OH explicitly shows the carbon–carbon bond. Both are acceptable condensed structural formulas for ethanol.
Why is ethanol’s structural formula important for its use as a fuel?
The C–C and C–H bonds store chemical energy. When ethanol burns, these bonds break and form stronger bonds in CO2 and H2O, releasing heat. The presence of oxygen in the molecule means ethanol has a lower energy density than gasoline (about 30% less by volume), but it burns more cleanly due to the oxygen content.
Can ethanol be represented as C2H6O?
Yes, C2H6O is the molecular formula, but it is not a structural formula because it does not show how the atoms are connected. It could be ethanol or dimethyl ether. Always use CH3CH2OH to specify ethanol.
How does the structural formula explain ethanol’s solubility in water?
The –OH group is polar and can form hydrogen bonds with water molecules. The ethyl group (CH3CH2–) is nonpolar, but the small size of the molecule means the polar group dominates, making ethanol miscible with water in all proportions.
What is the geometry around the oxygen atom in ethanol?
The oxygen atom is sp3 hybridized, giving a bent geometry with a bond angle of about 104.5° (similar to water). The C–O–H angle is approximately 108.9° in the gas phase, but this can vary slightly with phase.
Is ethanol the same as ethyl alcohol?
Yes, ethanol is the systematic IUPAC name, while ethyl alcohol is a common name. Both refer to CH3CH2OH. In laboratory contexts, “ethanol” is preferred to avoid confusion with methanol or isopropyl alcohol.
Safety and Handling
Ethanol is flammable and should be kept away from open flames and oxidizers. It is also hygroscopic and can absorb water from the air, so containers should be kept tightly sealed. When working with ethanol in the lab, follow your lab method, the safety data sheet (SDS) and your supervisor. If you spill ethanol, it evaporates quickly, but in confined spaces the vapor can form an explosive mixture with air. Always use it in a well-ventilated area or fume hood.
For solution preparation, always add the solute to the solvent and then bring the final volume to the mark, rather than adding a pre-measured volume of solvent, because the volume can change upon mixing. The calculator above assumes you are using the final volume, not the solvent volume.
Related
Formula used
in m | Mass of ethanol | g | 46.07 | 0 in mm | Molar mass of ethanol | g/mol | 46.07 | 0.001 in v | Final solution volume | mL | 1000 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works