Glucose mass determination calculates the weight of glucose (C6H12O6) needed to prepare a solution of a given molarity and volume, or conversely, finds the molarity when you weigh out a known mass. You enter the mass, molar mass, and final volume (or any two of these with the third as the unknown) and the calculator returns the missing value. This page focuses on the most common lab task: converting between mass of glucose, its molar mass (180.156 g/mol), and the desired solution concentration.
Formula
The core relationship is the definition of molarity:
Molarity (mol/L) = mass of solute (g) ÷ molar mass (g/mol) ÷ volume of solution (L)
In symbols: c = m / (M × V), where:
- m = mass of glucose in grams (g)
- M = molar mass of glucose = 180.156 g/mol (from C6H12O6: 6×12.011 + 12×1.008 + 6×15.999)
- V = final solution volume in liters (L). If you have mL, divide by 1000 to get L.
To solve for mass instead: m = c × M × V. This is the formula you use when you want to make, say, 500 mL of 0.1 M glucose: multiply 0.1 × 180.156 × 0.5 = 9.008 g.
Worked Example
Using the default values from the calculator above: you have 2.922 g of glucose, a molar mass of 180.156 g/mol, and you dissolve it in a final volume of 250 mL.
- Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
- Calculate moles of glucose: 2.922 g ÷ 180.156 g/mol = 0.016219 mol
- Divide moles by volume: 0.016219 mol ÷ 0.250 L = 0.064876 mol/L
- Round to 4 decimal places: 0.0649 M (or 64.88 mM)
The calculator shows 0.0649 mol/L for the first output, matching the manual calculation.
Assumptions
- The glucose is anhydrous (no water of crystallization). Glucose monohydrate (C6H12O6·H2O, MW 198.17) would need a different molar mass.
- The final volume is measured after dissolving, not the volume of solvent added. This matters because glucose adds significant volume.
- The solution is dilute enough that molarity ≈ molality; for most lab work this is fine.
- Temperature is near 25 °C; molarity changes slightly with thermal expansion of the solution.
When to Use This Calculation
You use glucose mass determination in any of these situations:
- Preparing a culture medium with a specific glucose concentration (e.g., 2% w/v or 100 mM).
- Making standard solutions for a glucose assay or standard curve.
- Checking the concentration of a stock solution you already made.
- Converting between mass fraction (e.g., 5% glucose) and molarity.
For percent solutions, remember: 5% w/v means 5 g glucose per 100 mL solution. To convert that to molarity: (5 g ÷ 180.156 g/mol) ÷ 0.1 L = 0.2775 M. The calculator above works for any mass and volume, so you can use it for percent-based recipes too.
Common Mistakes and How to Avoid Them
- Using the wrong molar mass: Glucose monohydrate is common in some labs. Always check the bottle label. Anhydrous glucose is 180.156 g/mol; monohydrate is 198.17 g/mol. The difference is about 10%.
- Mixing up mass and weight: Weighing gives mass in grams. If you have a weight in kilograms, multiply by 1000 first.
- Volume vs. solvent: If you add 250 mL of water to 2.922 g glucose, the final volume will be slightly more than 250 mL (glucose dissolves to add ~0.6 mL per gram). Always dissolve then bring to volume in a volumetric flask.
- Rounding too early: Keep at least 4 significant figures during intermediate steps. Round only the final answer.
- Ignoring temperature: Molarity is defined at a specific temperature. If you prepare at 20 °C and use at 37 °C, the concentration drops by roughly 0.5%.
How to Choose Between Anhydrous and Monohydrate
If your recipe calls for glucose without specifying hydrate, assume anhydrous. If you only have the monohydrate, adjust the mass: multiply the anhydrous mass by (198.17 ÷ 180.156) = 1.100. For example, to get 2.922 g anhydrous, weigh 3.214 g monohydrate. Conversely, if a recipe says monohydrate and you have anhydrous, divide by 1.100. This correction matters for precise buffers and enzymatic assays.
Limitations of the Formula
The molarity formula assumes ideal solution behavior. At high concentrations (above ~1 M), glucose solutions deviate slightly because the solute occupies volume and interacts with water. For most biological and chemical work (0.001–0.5 M), the error is negligible. Also, the formula gives concentration by amount of substance, not by mass percent. If you need mass percent (g glucose per 100 g solution), you must know the solution density. For example, a 1 M glucose solution has a density of about 1.06 g/mL, so 1 L weighs 1060 g, of which 180.156 g is glucose, giving 17.0% by mass.
Frequently Asked Questions
How many grams of glucose are in 1 liter of 1 M solution?
Exactly 180.156 g, by definition of molar mass. You weigh 180.156 g anhydrous glucose, dissolve in about 800 mL water, then bring the total volume to 1 L in a volumetric flask.
What is the difference between 5% glucose and 50 mM glucose?
5% w/v means 5 g per 100 mL = 50 g/L. Divide by 180.156 g/mol to get 0.2775 M = 277.5 mM. So 5% glucose is about 5.5 times more concentrated than 50 mM. They are not equivalent.
Can I use this calculator for glucose in blood or urine?
No. Clinical glucose measurements use specialized assays (e.g., hexokinase or glucose oxidase) and report in mg/dL or mmol/L. This calculator is for preparing lab solutions, not for interpreting medical tests. Never use it to dose insulin or diagnose conditions.
Why does my glucose solution volume change after dissolving?
Glucose is quite soluble (about 91 g per 100 mL water at 25 °C) and adds significant volume. When you dissolve 50 g glucose in water, the solution volume increases by roughly 30 mL. That is why you must use a volumetric flask and bring to the mark after dissolving, not before.
How do I make a 0.5 M glucose stock solution?
Weigh 0.5 × 180.156 = 90.078 g of anhydrous glucose. Dissolve in about 700 mL of distilled water, then bring the total volume to 1 L. Store refrigerated; glucose solutions can support microbial growth, so prepare fresh or add a preservative if needed for long-term storage.
Is glucose molar mass always 180.156?
For anhydrous D-glucose, yes, using IUPAC standard atomic weights. Some textbooks round to 180.16 or 180.2. For precise work, use 180.156. If you use a different isotope (e.g., deuterated glucose), the molar mass changes.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 180.156 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED