This calculator converts between the mass of glucose (in grams), its molar mass (g/mol), and the final solution volume (in mL) to give the molar concentration (mol/L) and millimolar concentration (mM). You enter any two of the three values—mass, molar mass, and volume—and the calculator returns the concentration. It is designed for lab solution prep, such as making a glucose stock solution for cell culture media or biochemical assays.
Formula
The molar concentration is calculated using the standard formula:
C = m / (M × V)
where:
- C = molarity (mol/L, also written as M)
- m = mass of solute (g)
- M = molar mass of solute (g/mol)
- V = final solution volume (L)
Because the volume input is in milliliters, the formula includes the conversion factor: V (L) = V (mL) / 1000.
Worked Example
Using the default values from the calculator:
- Mass of glucose (m) = 2.922 g
- Molar mass (M) = 58.44 g/mol (this is actually the molar mass of sodium chloride, but the calculator is generic; for glucose use 180.16 g/mol)
- Volume (V) = 250 mL = 0.250 L
Step 1: Convert volume to liters:
V = 250 mL / 1000 = 0.250 L
Step 2: Calculate moles of solute:
moles = m / M = 2.922 g / 58.44 g/mol = 0.05000 mol
Step 3: Calculate molarity:
C = 0.05000 mol / 0.250 L = 0.2000 mol/L (0.2000 M)
Step 4: Convert to millimolar:
cmm = 0.2000 mol/L × 1000 = 200.0 mM
The calculator shows 0.2000 mol/L and 200.00 mM for these defaults.
Assumptions
- The solute is pure and dry (no water of hydration unless accounted for in the molar mass).
- The final volume is measured after the solute is fully dissolved and the solution is brought to the mark—not the volume of solvent added.
- The solution is dilute enough that molarity ≈ molality (density ≈ 1 kg/L).
- The molar mass used is the one for the exact chemical form (e.g., anhydrous glucose vs. glucose monohydrate).
When to Use This Calculator
This calculator is for preparing solutions from solid solute. It is the standard calculation for making buffers, culture media, or any reagent solution where you know the target concentration and final volume. It is also used to check the concentration of a solution you have already made by weighing the solute and measuring the volume.
For glucose specifically, the molar mass is 180.156 g/mol (anhydrous). If you use glucose monohydrate (C6H12O6·H2O), the molar mass is 198.17 g/mol. Using the wrong molar mass will shift your concentration by about 10%—a common source of error.
How to Read the Result
The first output, molarity (mol/L), tells you how many moles of glucose are in each liter of solution. A 1 M glucose solution has 180.16 g of glucose per liter. The second output, millimolar (mM), is simply the molarity multiplied by 1000. Many biology protocols call for glucose at 5 mM or 25 mM, so the mM readout is often more practical.
If you are preparing a solution, you can work backward: decide the desired molarity and volume, then calculate the mass needed. This calculator does that if you enter the target concentration? No—this version only computes concentration from mass and volume. For mass-from-concentration, you would rearrange the formula: m = C × M × V.
Common Mistakes and Unit Mix-Ups
- Using volume of solvent instead of final volume: If you add 250 mL of water to 2.922 g of glucose, the final volume will be slightly more than 250 mL. Always dissolve the solute in less than the final volume, then add solvent to the mark.
- Forgetting to convert mL to L: The formula requires liters. If you plug in mL directly, you will get a concentration 1000 times too high.
- Using the wrong molar mass: Anhydrous glucose is 180.16 g/mol; glucose monohydrate is 198.17 g/mol. Check your bottle.
- Rounding molar mass too early: Rounding 180.156 to 180 is fine for most work, but if you need 3-4 significant figures, use the full value.
- Confusing molarity with molality: Molarity is moles per liter of solution; molality is moles per kilogram of solvent. For dilute aqueous solutions they are numerically close, but not identical.
Practical Example: Making 500 mL of 0.5 M Glucose
You need 500 mL of 0.5 M glucose for a fermentation experiment.
Step 1: Calculate moles needed:
moles = C × V = 0.5 mol/L × 0.500 L = 0.25 mol
Step 2: Calculate mass needed:
mass = moles × molar mass = 0.25 mol × 180.16 g/mol = 45.04 g
Step 3: Weigh 45.04 g of anhydrous glucose, dissolve in about 400 mL of distilled water, then bring the total volume to 500 mL in a volumetric flask.
This is a standard lab procedure. Always follow your lab’s safety guidelines and the safety data sheet (SDS) for glucose—it is generally low hazard, but dust can be irritating.
Limits of the Formula
The formula assumes ideal behavior: the volume of the solute particles is negligible and there is no contraction or expansion upon mixing. For glucose solutions up to about 1 M, this is a good approximation. At very high concentrations (e.g., >2 M), the solution volume may not be perfectly additive, and the actual concentration may differ slightly from the calculated value. If you need high precision, prepare the solution by weight and use a density table, or verify with a refractometer or enzymatic assay.
Also, this calculator does not account for temperature. Molarity changes slightly with temperature because the solution volume expands or contracts. For most lab work at room temperature, the effect is small enough to ignore.
Frequently Asked Questions
What is the molar mass of glucose?
The molar mass of anhydrous glucose (C6H12O6) is 180.156 g/mol. This is calculated from the atomic weights: carbon (12.011 × 6 = 72.066), hydrogen (1.008 × 12 = 12.096), and oxygen (15.999 × 6 = 95.994), summing to 180.156 g/mol. If you use glucose monohydrate, add the mass of one water molecule (18.015 g/mol) to get 198.17 g/mol.
How many grams of glucose are in 1 liter of a 1 M solution?
Exactly 180.156 grams of anhydrous glucose dissolved in enough water to make 1 liter of solution. That is because 1 mole of glucose weighs 180.156 g. If you use glucose monohydrate, you would need 198.17 g to get the same 1 M concentration.
What is the difference between molarity and molality?
Molarity (M) is moles of solute per liter of solution. Molality (m) is moles of solute per kilogram of solvent. For dilute aqueous solutions, they are numerically similar because 1 kg of water is about 1 L, but they diverge at higher concentrations or when the solute contributes significantly to volume. This calculator gives molarity.
Can I use this calculator for other sugars like fructose or sucrose?
Yes, the formula is the same for any solid solute. Just change the molar mass input. Fructose also has the formula C6H12O6 (molar mass 180.156 g/mol), while sucrose is C12H22O11 (molar mass 342.297 g/mol). The calculator works for any compound as long as you enter the correct molar mass.
Why does the calculator show 0.2000 M for the default values?
The default mass is 2.922 g and the default molar mass is 58.44 g/mol (which is sodium chloride, not glucose). That gives 0.05000 moles. Dividing by 0.250 L gives 0.2000 M. For glucose, you would change the molar mass to 180.156, and the result would be 0.06488 M (64.88 mM). The defaults are just examples to show how the calculation works.
How do I make a 5 mM glucose solution in 100 mL?
First, calculate moles: 0.005 mol/L × 0.100 L = 0.0005 mol. Then mass = 0.0005 mol × 180.156 g/mol = 0.09008 g, or about 90 mg. Weigh 90 mg of glucose, dissolve in about 80 mL of water, then bring to 100 mL in a volumetric flask. This is a common concentration for cell culture media.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED