Convert molarity and solution volume to grams of solute with this calculator: enter the molar concentration, the final volume, and the solute’s molar mass. It calculates the required mass in grams using the relationship between moles, concentration, and volume.
Formula
Mass in grams equals molarity multiplied by final solution volume in liters, multiplied by molar mass:
g = C × (V / 1000) × M
- g is the solute mass in grams.
- C is molarity in moles per liter (mol/L).
- V is the final solution volume in milliliters (mL). Divide by 1000 to convert mL to L.
- M is molar mass in grams per mole (g/mol).
The intermediate amount of solute is n = C × (V / 1000), in moles. Multiplying moles by g/mol gives grams because the mole units cancel. The calculator reports mass to three decimal places and amount in moles to four decimal places.
Worked Example
Using the calculator’s defaults—0.5 mol/L, 250 mL, and 58.44 g/mol—first convert the volume to liters:
250 mL / 1000 = 0.25000 L
Calculate the amount of solute:
n = 0.5 mol/L × 0.25000 L = 0.12500 mol
Then multiply by the molar mass:
g = 0.12500 mol × 58.44 g/mol = 7.305 g
The calculator’s headline result is 7.305 g. This is a mathematical mass for the stated concentration and final volume, not a measured guarantee of the concentration that will result in an actual preparation.
Assumptions
- The stated molarity is the desired concentration in the completed solution.
- Volume means final solution volume, not the volume of solvent added.
- The entered molar mass applies to the actual chemical form and purity being considered.
- The calculation treats the values entered as exact; real measurements and reagent purity can affect the result.
How to Use Molarity to Find Grams
Molarity, also called amount concentration, describes how many moles of solute are present per liter of solution. To find a mass from a desired molarity and volume, work through these steps:
- Identify the target molarity in mol/L.
- Use the intended final solution volume, then convert it to liters. For milliliters, divide by 1000.
- Multiply molarity by volume in liters to find moles of solute.
- Find the molar mass of the relevant compound in g/mol.
- Multiply moles by molar mass to get grams.
For example, molarity alone does not tell you a mass: a 0.5 mol/L solution in 100 mL requires less solute than a 0.5 mol/L solution in 1 L. Likewise, the same molarity and volume can require different masses for different substances because their molar masses differ.
Choosing the Correct Molar Mass
Molar mass is the mass of one mole of a substance. For a pure compound, calculate it by adding the standard atomic weights of all atoms in its formula, accounting for subscripts. For sodium chloride, NaCl, the commonly used values are Na = 22.990 g/mol and Cl = 35.45 g/mol, giving 58.44 g/mol when rounded to two decimal places.
Check that the formula matches the chemical form named on the container or in the problem. A hydrate includes water molecules in its formula and therefore has a different molar mass from the anhydrous compound. Salts, solvates, and compounds with different counterions can also have different molar masses. If the material is not pure, the mass of material needed may differ from the pure-compound calculation; purity corrections require reliable assay information and are not included here.
Final Volume, Units, and Significant Figures
A common source of error is treating the required final volume as the amount of solvent to pour in. In a concentration calculation, volume is the volume of the completed solution. Adding a solid to a measured volume of solvent does not necessarily leave the total volume unchanged. For lab work, use the method specified for the intended preparation and bring the solution to its stated final volume where that method calls for it.
- Convert milliliters to liters before multiplying by molarity. For instance, 250 mL is 0.250 L, not 250 L.
- Keep units visible: (mol/L) × L × (g/mol) = g.
- Do not round intermediate values more than necessary. Round the final answer to match the precision of the input measurements.
- Use molar mass in g/mol, not molecular mass in atomic mass units as though it were a mass in grams.
The calculator accepts nonnegative inputs. A zero molarity, volume, or molar mass produces zero mass mathematically, but a zero value may not describe a useful solution. Extremely precise displayed digits do not imply that laboratory measurements are equally precise.
What the Calculation Does—and Does Not—Tell You
This equation is a direct conversion, not a prediction of chemical behavior. It does not account for reactions, decomposition, incomplete dissolution, volume changes on mixing, or uncertainty in concentration and molar mass. It also does not determine whether a substance is safe to handle or whether a particular solution is appropriate for any use.
For a bench preparation, follow your lab method, the safety data sheet (SDS), and your supervisor. Use suitable personal protective equipment and handling practices for the substance and process. If a task requires a concentration verified to a specified tolerance, the calculation is only one part of the work; the prescribed preparation and measurement method determine how that tolerance is assessed.
Frequently Asked Questions
How do I calculate grams from molarity and mL?
Use grams = molarity (mol/L) × volume (mL) / 1000 × molar mass (g/mol). Dividing by 1000 converts the volume from milliliters to liters.
Why do I need the molar mass?
Molarity and volume give the amount of solute in moles. Molar mass converts that amount from moles to grams, and it depends on which substance you are calculating.
Is molarity the same as moles?
No. Molarity is moles per liter of solution, while moles are an amount of substance. Multiply molarity by volume in liters to obtain moles.
Do I use the volume of water or the final solution volume?
Use the final solution volume. The volume of solvent initially measured is not necessarily equal to the volume of the completed solution.
Can I calculate grams from molarity without knowing the compound?
You can calculate moles if you know the molarity and volume, but you cannot convert those moles to grams without the compound’s molar mass.
Related
Formula used
in m | Molarity | mol/L | 0.5 | 0 in v | Final solution volume | mL | 250 | 0 in mm | Molar mass | g/mol | 58.44 | 0 out g | Mass of solute | g | m * (v / 1000) * mm | 3 out n | Amount of solute | mol | m * (v / 1000) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculator in Hindi: Meaning, Usage and Examples0.2000 mol/L
- Volume Strength Formula in Terms of Molarity11.20 volumes
- H2O2 Volume Strength to Molarity Calculator0.893 mol/L
- Volume Strength to Molarity: Formula and Calculator0.0409 mol/L
- Molar Volume: Definition, Formula, and Calculator22.414 L/mol
- Molar Volume of a Gas Calculator and Formula22.4140 L/mol