molecalculator

Moles & Molar Mass

Half Life Key: What It Is & How to Use It

Calculator No. 01-8225 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The “half life key” on a scientific calculator (often labeled ln or ex) is not a single dedicated button; rather, it refers to the functions you use to solve half-life problems. You enter the decay constant or elapsed time, and the calculator returns the half-life or remaining quantity using the natural logarithm and exponential functions. This page explains the math, shows you exactly which keys to press, and provides a working half-life calculator for any decay process.

Formula

The half-life (t1/2) is the time required for a quantity to reduce to half its initial value. It relates to the decay constant (λ) by:

t1/2 = ln(2) / λ

where ln(2) ≈ 0.693147, and λ is the probability of decay per unit time (units: 1/time). The fraction remaining after time t is:

N(t) / N0 = e−λt

In the calculator above, t is the elapsed time (in hours), k is the decay constant (per hour), hl is the half-life (hours), and N is the fraction of the original amount remaining (dimensionless, 0 to 1).

Worked Example

Suppose a sample has a decay constant of 0.0693 per hour, and you want the half-life and the fraction remaining after 10 hours.

  1. Half-life: t1/2 = ln(2) / 0.0693 = 0.693147 / 0.0693 ≈ 10.00 hours.
  2. Fraction remaining: e−0.0693 × 10 = e−0.693 ≈ 0.5000.

So after 10 hours, exactly half the original remains, as expected for a half-life of 10 hours.

Assumptions

  • Decay is exponential and follows first-order kinetics.
  • The decay constant is constant over time (no environmental changes).
  • The sample is large enough that statistical fluctuations are negligible.
  • No new atoms are added or removed except by decay.

How the Half-Life Key Works on a Calculator

Most scientific calculators do not have a button labeled “half-life.” Instead, you use:

  • ln (natural logarithm) – to compute ln(2) when finding half-life from the decay constant.
  • ex or inv ln – to compute e−λt for the remaining fraction.

For example, to find the half-life given λ = 0.0693: press ln 2 = (get 0.6931), then divide by 0.0693. To find the remaining fraction after 10 hours: press ex with the exponent −0.693 (or type 0.693, then press +/− before ex).

Choosing the Right Decay Constant

The decay constant λ is specific to each isotope or process. You can find it from the half-life using λ = ln(2) / t1/2. If you have a half-life in seconds, minutes, or years, convert it to the same time unit you use for t in the formula. For example, carbon-14 has a half-life of 5730 years, so λ = 0.6931 / 5730 ≈ 1.209 × 10−4 per year.

Common Mistakes and Misconceptions

  • Mixing units: If t is in hours but λ is per day, the result is nonsense. Always match time units.
  • Using log base 10 instead of natural log: The half-life formula requires ln, not log. Pressing log instead of ln will give a wrong value (0.301 instead of 0.693).
  • Confusing half-life with mean life: The mean life (τ) equals 1/λ, and the half-life is τ × ln(2) ≈ 0.693τ.
  • Thinking half-life is linear: After two half-lives, 25% remains, not 0%. The decay is exponential, not linear.

Real-World Applications

Half-life calculations are used in:

  • Radiometric dating: Carbon-14 (t1/2 = 5730 years) for organic materials, uranium-238 (4.5 billion years) for rocks.
  • Nuclear medicine: Iodine-131 (8 days) for thyroid treatment, technetium-99m (6 hours) for imaging.
  • Pharmacokinetics: Drug elimination half-life determines dosing intervals (e.g., a drug with a 24-hour half-life is often given once daily).
  • Environmental science: Persistence of pesticides or pollutants in soil.

Safety and Practical Notes

When working with radioactive materials in a lab, always follow your institutional safety protocols, the safety data sheet (SDS), and your supervisor’s instructions. The calculator above is for educational and planning purposes only; it does not account for biological half-life, chemical binding, or other complex factors. For medical dosing, consult a qualified professional.

Frequently Asked Questions

What does the “half life” button look like on a calculator?

There is no dedicated half-life button. You use the ln key for the natural logarithm and the ex (or shift+ln) key for exponentials. Some graphing calculators have a log menu, but the half-life formula always uses natural log.

How do I find half-life from decay rate?

If you know the decay constant λ (probability of decay per unit time), the half-life is ln(2)/λ. If you know the decay rate as a percentage per year, convert it to a decimal fraction (e.g., 5% per year = 0.05 per year) and use that as λ.

What is the difference between half-life and mean life?

Mean life (τ) is the average lifetime of an atom in the sample, equal to 1/λ. Half-life is the time for half the sample to decay, which is τ × ln(2) ≈ 0.693τ. For carbon-14, mean life is about 8267 years, half-life is 5730 years.

Can half-life be used for non-radioactive processes?

Yes, any first-order process has a half-life: chemical reactions (e.g., decomposition of hydrogen peroxide), drug elimination, and even the discharge of a capacitor in an RC circuit. The formula is identical.

Why is half-life constant regardless of amount?

Because decay is a random, probabilistic process. The probability per atom per unit time is constant, so the fraction decaying per unit time is always the same. A larger sample just has more atoms decaying in absolute numbers, but the proportion stays constant.

Limits of the Formula

The simple exponential model assumes a single decay path and a constant environment. In reality, some isotopes have multiple decay modes (e.g., beta and gamma), and biological systems may clear substances through multiple pathways. Also, at extremely small sample sizes, statistical fluctuations become significant, but the half-life concept still applies to the average behavior.

Related

Formula used
in t | Elapsed time | h | 10 | 0
in k | Decay constant (λ) | per h | 0.0693 | 0
out hl | Half-life | h | ln(2) / k | 4
out N | Fraction remaining | - | exp(-k * t) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →