molecalculator

Moles & Molar Mass

Half-Life Questions: Formula, Meaning & How to Calculate

Calculator No. 01-8292 · Updated · Formula and assumptions shown below

Amount remaining 12.5000 g
Fraction remaining
0.1250
= (0.5)^(Elapsed time ÷ Half-life)
Percent remaining
12.50 %
= (0.5)^(Elapsed time ÷ Half-life) × 100
Initial amount
100 g
Set in the form below
You enter
Initial amount (g), Half-life (hours), Elapsed time (hours)
You get
Amount remaining (g), Fraction remaining, Percent remaining (%)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Half-life questions ask how long it takes for half of a radioactive substance to decay, or how much of a substance remains after a given time. To answer them, you use the half-life formula N(t) = N₀ × (1/2)^(t/t½), where N₀ is the starting amount, t is elapsed time, and t½ is the half-life. This page explains the formula, how to solve the three main types of half-life problems, and common mistakes to avoid.

Formula

The exponential decay equation is:

N(t) = N₀ × (1/2)^(t / t½)

  • N(t) – amount remaining after time t (same unit as N₀, e.g., grams, moles, or becquerels)
  • N₀ – initial amount (same unit)
  • t – elapsed time (any time unit, as long as t and t½ use the same unit)
  • t½ – half-life (same time unit as t)

The exponent (t / t½) is the number of half-lives that have passed. If 2 half-lives have passed, the fraction remaining is (1/2)² = 1/4, or 25%.

Worked Example

Suppose you start with 100 g of a radioactive isotope with a half-life of 10 hours, and you wait 30 hours.

Step 1: Find the number of half-lives: 30 h ÷ 10 h = 3 half-lives.

Step 2: Multiply the initial amount by (1/2) three times: 100 g × (1/2) × (1/2) × (1/2) = 100 g × (1/8) = 12.5 g.

Step 3: Using the formula directly: 100 × (0.5)^(30/10) = 100 × (0.5)³ = 100 × 0.125 = 12.5 g.

So after 30 hours, 12.5 g remains, which is 12.5% of the original amount. The calculator above gives the same result.

Assumptions

  • Radioactive decay is a first-order process – the rate is proportional to the amount present.
  • The half-life is constant and does not change with temperature, pressure, or chemical state.
  • No new atoms of the isotope are being added during the time period.
  • The decay product is not the same isotope (no branching that complicates the simple equation).

How to Solve Half-Life Problems

Most half-life questions fall into one of three categories. Here is how to approach each:

  1. Find the amount remaining – you know N₀, t½, and t. Plug them into the formula directly, as in the worked example.
  2. Find the time elapsed – you know N₀, N(t), and t½. Rearrange to t = t½ × log₂(N₀ / N(t)). For example, if 25 g remains from 100 g, then N₀/N(t) = 4, log₂(4) = 2, so t = 2 × t½.
  3. Find the half-life – you know N₀, N(t), and t. Rearrange to t½ = t / log₂(N₀ / N(t)). For instance, if 50 g decays to 12.5 g in 30 hours, then N₀/N(t) = 4, log₂(4) = 2, so t½ = 30 / 2 = 15 hours.

When using a scientific calculator, use the change-of-base formula: log₂(x) = ln(x) / ln(2).

Common Mistakes and Misconceptions

  • Mixing units – if t is in days and t½ is in hours, convert one first. The ratio t/t½ must be unitless.
  • Thinking half-life means “the time for all to decay” – after one half-life, 50% remains; after two, 25%; it never reaches exactly zero in theory.
  • Using the wrong base – the formula uses 1/2, not 1/e. The decay constant λ is related by t½ = ln(2)/λ, so if you use the exponential form N = N₀e^(−λt), use λ = 0.693/t½.
  • Rounding too early – in multi-step problems, keep at least 3–4 significant figures until the final answer.
  • Confusing half-life with mean lifetime – the mean lifetime τ = t½ / ln(2) ≈ 1.443 × t½. They are different values.

Real-World Examples of Half-Lives

Half-lives range from fractions of a second to billions of years. Here are a few well-known ones:

  • Carbon-14: t½ ≈ 5,730 years – used in radiocarbon dating of organic materials.
  • Uranium-238: t½ ≈ 4.468 billion years – used to date the age of the Earth and rocks.
  • Iodine-131: t½ ≈ 8.02 days – a medical isotope; its short half-life means it decays quickly in the body.
  • Technetium-99m: t½ ≈ 6.01 hours – used in diagnostic imaging; it decays to a stable isotope.
  • Polonium-214: t½ ≈ 164 microseconds – an extremely short-lived decay product in the uranium series.

These values come from standard nuclear data tables. The formula works for any radioactive isotope regardless of the half-life length.

Why Half-Life Is Important

Half-life is not just a math exercise – it has practical applications in many fields:

  • Carbon dating – comparing the remaining carbon-14 in a sample to a living organism gives the time of death.
  • Medicine – knowing how fast a radioactive tracer decays helps doctors plan imaging scans and radiation therapy.
  • Nuclear waste management – long half-lives mean waste remains hazardous for thousands of years, influencing storage decisions.
  • Geology – uranium-lead and potassium-argon dating rely on half-lives to determine rock ages.
  • Pharmacology – the concept is adapted to drug elimination: the biological half-life is the time for the drug concentration in the body to drop by half.

Frequently Asked Questions

What does half-life mean in simple terms?
Half-life is the time required for exactly half of the atoms in a radioactive sample to decay. If you start with 100 atoms and the half-life is 1 hour, after 1 hour you have 50 atoms, after 2 hours 25, and so on.

How do you calculate half-life from decay constant?
The decay constant λ is related to half-life by t½ = ln(2) / λ. For example, if λ = 0.1 per year, then t½ = 0.693 / 0.1 = 6.93 years.

Can half-life be used for non-radioactive things?
Yes, the same exponential decay model applies to any first-order process, including drug elimination from the body, chemical reaction rates, and even the discharge of a capacitor. In those contexts, “half-life” means the time for the quantity to fall to half its initial value.

What is the difference between half-life and mean lifetime?
Mean lifetime (τ) is the average time an atom exists before decaying. It is longer than the half-life: τ = t½ / ln(2) ≈ 1.443 × t½. For a sample, after one mean lifetime, about 36.8% of the atoms remain.

Why is half-life constant and not affected by heat or pressure?
Radioactive decay is a nuclear process, not a chemical one. The strong and weak nuclear forces that govern decay are unaffected by ordinary temperature, pressure, or chemical bonding. Only extreme conditions like those inside stars can alter some decay rates.

How do you solve a half-life problem without a calculator?
If the elapsed time is a whole-number multiple of the half-life, you can simply multiply by 1/2 that many times. For example, if t = 3 × t½, then fraction remaining = (1/2)³ = 1/8. For non-integer multiples, you need logarithms or a calculator.

Related

Formula used
in n0 | Initial amount | g | 100 | 0
in th | Half-life | hours | 10 | 0.000001
in t | Elapsed time | hours | 30 | 0
out rem | Amount remaining | g | n0 * (0.5)^(t / th) | 4
out frac | Fraction remaining | - | (0.5)^(t / th) | 4
out pct | Percent remaining | % | (0.5)^(t / th) * 100 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →