molecalculator

Moles & Molar Mass

Half Life Symbol: t½ and How It Is Used

Calculator No. 01-8330 · Updated · Formula and assumptions shown below

Remaining amount 25.00 g
Fraction remaining
0.2500
= 0.5^(Elapsed time ÷ Half-life)
Initial amount
100 g
Set in the form below
Half-life
6 hours
Set in the form below
You enter
Initial amount (g), Half-life (hours), Elapsed time (hours)
You get
Remaining amount (g), Fraction remaining
Rounding
2 dp · 4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The half-life symbol is t½ (also written t½, t/½, or τ½), where “t” stands for time and the subscript “½” indicates one-half. In nuclear physics and chemistry, it represents the time required for half of a given quantity of a radioactive substance to decay.

Formula

The fundamental equation for exponential decay is:

N(t) = N0 × (1/2)t / t½

  • N(t) – the quantity remaining after time t (in grams, moles, or number of atoms)
  • N0 – the initial quantity at time zero
  • t – elapsed time (same unit as the half-life)
  • t½ – the half-life (time unit)

The exponent t / t½ counts how many half-lives have passed. If 2 half-lives have passed, the fraction remaining is (1/2)2 = 1/4, and so on. The same formula works for any process that follows first-order kinetics, not just nuclear decay.

Worked Example

Suppose you start with 100 g of a radioactive isotope with a half-life of 6 hours. How much remains after 12 hours?

  1. Identify the values: N0 = 100 g, t½ = 6 h, t = 12 h.
  2. Compute the number of half-lives: 12 ÷ 6 = 2.
  3. Apply the formula: N(12) = 100 × (1/2)2 = 100 × 0.25 = 25 g.

After 12 hours, 25 g of the original 100 g remains. The calculator above gives the same result: 25.00 g (fraction remaining = 0.25).

Assumptions

  • The decay follows first-order kinetics (constant half-life).
  • No new atoms of the isotope are being added (closed system).
  • The half-life is independent of temperature, pressure, or chemical state – true for most nuclear decays, but not for some exotic processes.

Where You Will See the Symbol

The t½ symbol appears in many contexts beyond nuclear physics:

  • Nuclear chemistry – decay of isotopes like carbon-14 (t½ = 5,730 years) or iodine-131 (t½ = 8.02 days).
  • Pharmacokinetics – the time for a drug’s concentration in the body to drop by half (e.g., caffeine t½ ≈ 5 hours).
  • Biology – the half-life of proteins or mRNA in a cell.
  • Environmental science – persistence of pollutants, such as DDT in soil.

In each case, the symbol means the same thing: the time for half of the starting amount to disappear or transform.

How to Use the Half-Life Calculator

Enter the initial amount, the half-life (in any time unit, but be consistent), and the elapsed time. The calculator returns the remaining amount and the fraction remaining. For example, if you have a 50 mg sample of a substance with a half-life of 3 hours and you wait 9 hours, you can type 50, 3, and 9 to get 6.25 mg remaining.

To find the half-life itself from decay data, you would rearrange the formula: t½ = t × ln(2) / ln(N0/N(t)). This page’s calculator solves for the remaining amount, not the half-life, but you can use it iteratively to estimate t½.

Common Mistakes and Misconceptions

  • Mixing time units – If the half-life is in hours, the elapsed time must also be in hours. Convert minutes to hours first (e.g., 90 min = 1.5 h).
  • Thinking half-life means “the time to decay completely” – No, after one half-life, half remains; after two, a quarter; after ten, about 0.1% remains. It never reaches zero mathematically.
  • Using the wrong base – The correct base is 1/2, not e or 10. The decay constant λ relates as t½ = ln(2)/λ, but the formula here uses the half-life directly.
  • Rounding too early – Keep at least three significant figures in intermediate steps, especially when the exponent is not a whole number.

Limits of the Formula

The simple exponential decay formula assumes a constant half-life. For most radioactive isotopes this holds true, but there are exceptions:

  • Metastable states – Some isotopes decay through intermediate states with different half-lives, so the overall decay curve is not a single exponential.
  • Chemical effects – For electron capture decay, the half-life can depend slightly on the chemical environment (e.g., beryllium-7).
  • Non-first-order processes – Biological elimination of drugs often follows more complex kinetics (e.g., zero-order at high doses), so a single half-life may not describe the whole curve.

For lab work, always follow your method, the safety data sheet (SDS), and your supervisor’s instructions.

Frequently Asked Questions

What does t½ mean in simple terms?

It means the time it takes for half of a sample to decay or be eliminated. If you have 80 g of a substance with a half-life of 2 days, after 2 days you have 40 g, after 4 days 20 g, and so on.

Is the half-life symbol always written as t½?

Yes, the standard symbol is t½, but you may also see t1/2 or the Greek letter τ (tau) used for mean lifetime, which is related but not identical. Mean lifetime τ = t½ / ln(2) ≈ 1.443 × t½.

How do I calculate the half-life from a decay curve?

Find the time at which the quantity drops to half its initial value. For example, if a sample starts at 100 Bq and reaches 50 Bq at 3 hours, the half-life is 3 hours. For more precision, plot ln(N) versus time; the slope is –λ, and t½ = ln(2)/λ.

Why is half-life used instead of “full life”?

Because radioactive decay is exponential – it never reaches zero. Half-life gives a consistent, measurable time point. “Full life” would be infinite, so it’s not useful.

Does the half-life change with temperature or pressure?

For most nuclear decays, no. The half-life is essentially constant regardless of physical conditions. However, for a few isotopes that decay by electron capture, the half-life can vary slightly with chemical bonding or pressure, but the effect is tiny.

Can I use this calculator for drug half-lives?

Yes, the math is the same, but be aware that drug elimination often follows more complex kinetics. The calculator gives a theoretical remaining amount based on a single half-life. It is for educational and planning purposes only – never use it for actual medication dosing.

Related

Formula used
in n0 | Initial amount | g | 100 | 0
in th | Half-life | hours | 6 | 0.000001
in t | Elapsed time | hours | 12 | 0
out rem | Remaining amount | g | n0 * 0.5^(t / th) | 2
out frac | Fraction remaining | - | 0.5^(t / th) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →