To convert Celsius to Fahrenheit, multiply the Celsius temperature by 9/5 (or 1.8) and then add 32. For example, 20°C becomes (20 × 9/5) + 32 = 68°F. This page gives you a quick calculator, the exact formula, worked examples, and the context you need to convert temperatures confidently in everyday life, cooking, and science.
Formula
The conversion between Celsius and Fahrenheit uses a linear relationship because both scales measure the same physical quantity—temperature—but with different zero points and different step sizes. The formula is:
°F = (°C × 9/5) + 32
Where:
- °C is the temperature in degrees Celsius.
- 9/5 (equal to 1.8) is the ratio of the size of one degree Fahrenheit to one degree Celsius. A change of 1°C equals a change of 1.8°F.
- 32 is the offset because 0°C (the freezing point of water) corresponds to 32°F.
The reverse formula, to convert Fahrenheit to Celsius, is °C = (°F − 32) × 5/9.
Worked Example
Using the default value from the calculator above, convert 20°C to Fahrenheit:
- Start with the Celsius value: 20°C.
- Multiply by 9/5: 20 × 9/5 = 20 × 1.8 = 36.
- Add 32: 36 + 32 = 68.
The result is 68°F. The calculator shows the same answer rounded to one decimal place: 68.0°F.
Assumptions
- The conversion assumes the standard definitions of the Celsius and Fahrenheit scales.
- The Kelvin output uses the exact offset where 0°C = 273.15 K.
- No pressure or other environmental factors affect the conversion; it is a pure unit conversion.
Why the Formula Works
Both scales were defined using the freezing and boiling points of water at standard atmospheric pressure. On the Celsius scale, water freezes at 0°C and boils at 100°C—a span of 100 degrees. On the Fahrenheit scale, water freezes at 32°F and boils at 212°F—a span of 180 degrees. The ratio 180/100 simplifies to 9/5, which is why each Celsius degree is larger than each Fahrenheit degree. The 32-degree offset aligns the zero points: since 0°C is 32°F, you add 32 after scaling.
This linear relationship means you can convert any temperature, including negative values and very high values, using the same formula. For instance, absolute zero is −273.15°C, which converts to (−273.15 × 9/5) + 32 = −459.67°F.
Common Mistakes and How to Avoid Them
The most frequent error is adding 32 before multiplying. The order matters: multiply first, then add. Another common mistake is using 5/9 instead of 9/5 when going from Celsius to Fahrenheit. A quick sanity check: since Fahrenheit numbers are larger for most common temperatures (0°C = 32°F, 100°C = 212°F), your Fahrenheit result should be a larger number than the Celsius input for temperatures above −40°. At −40°, both scales read the same value (−40°C = −40°F), which is a useful checkpoint.
Rounding too early can also cause small errors. If you round 9/5 to 1.8, that is exact, but if you round intermediate results, you may get a value off by a degree or two. For cooking and weather, rounding to the nearest whole degree is usually fine; for lab work, keep more decimals.
Everyday Reference Points
Memorizing a few anchor temperatures helps you estimate conversions without a calculator:
- 0°C = 32°F (water freezes)
- 10°C = 50°F (cool day)
- 20°C = 68°F (room temperature)
- 30°C = 86°F (warm day)
- 37°C = 98.6°F (normal human body temperature)
- 100°C = 212°F (water boils)
These points are spaced roughly 10°C apart and 18°F apart, so you can interpolate: each 5°C change is about 9°F. For example, 25°C is halfway between 20°C and 30°C, so it is about halfway between 68°F and 86°F, which is 77°F—the exact value.
When to Use Celsius vs. Fahrenheit
Celsius is the standard unit in most of the world, in scientific work, and in the SI system. Fahrenheit is used primarily in the United States for weather, cooking, and body temperature. If you travel or follow international recipes, you will likely need both. Scientific contexts almost always use Celsius or Kelvin; the Fahrenheit scale is rarely used in research because the Celsius scale aligns with the metric system and the Kelvin scale is the absolute thermodynamic scale.
For cooking, many ovens in the US display Fahrenheit, while ovens in Europe and Asia display Celsius. A recipe written for one scale must be converted accurately, especially for baking, where a 10°F difference can change a cake’s texture. For body temperature, a reading of 38°C is 100.4°F, which is a fever, while 37°C is normal.
Using the Calculator
Enter any temperature in Celsius, including negative values down to absolute zero (−273.15°C), and the calculator returns the Fahrenheit equivalent rounded to one decimal place. It also gives the Kelvin value, which is useful for scientific calculations where absolute temperature is required, such as in gas law problems. The Kelvin output is exact: K = °C + 273.15, with no scaling factor because the Kelvin degree is the same size as the Celsius degree.
For lab work, remember that the conversion itself does not account for measurement uncertainty. If your thermometer reads 20.0°C, the Fahrenheit equivalent is 68.0°F, but the precision of the result is limited by the precision of the original measurement. Also note that this conversion applies to temperature values, not to temperature differences. A temperature change of 10°C is a change of 18°F, not 10 × 9/5 + 32. This distinction matters in heat calculations where you multiply a temperature difference by a heat capacity.
Frequently Asked Questions
What is the easiest way to convert Celsius to Fahrenheit without a calculator?
For a rough estimate, double the Celsius value and add 30. For example, 20°C doubled is 40, plus 30 gives 70°F, which is close to the exact 68°F. This approximation works best for temperatures between 0°C and 30°C. For a more accurate mental method, use the anchor points: 0°C = 32°F and 10°C = 50°F, then add 18°F for each 10°C step.
Why is −40° the same in both scales?
Because the two scales cross at that point. Setting the formulas equal—°C = (°C × 9/5) + 32—and solving for °C gives −40. This is a coincidence of the chosen zero points and scale sizes, but it is a handy checkpoint to verify your conversion is correct.
How do I convert Fahrenheit to Celsius?
Use the inverse formula: subtract 32 from the Fahrenheit value, then multiply by 5/9. For example, 68°F minus 32 is 36, times 5/9 is 20°C. This is the formula you need when reading a US recipe or weather report and you want Celsius.
Is the Kelvin scale the same as Celsius?
No, but they have the same degree size. A change of 1 K equals a change of 1°C. The difference is the zero point: 0 K is absolute zero (−273.15°C), so K = °C + 273.15. Kelvin has no negative values and is used in scientific equations where temperature must be absolute.
Does water always boil at 100°C?
Only at standard atmospheric pressure (1 atm, 101.325 kPa). At higher altitudes, the boiling point is lower; for example, at 2,000 meters elevation, water boils around 93°C. The Celsius and Fahrenheit conversion formulas remain valid, but the physical boiling point changes with pressure.
Why does the US still use Fahrenheit?
Historical reasons: the Fahrenheit scale was widely adopted in English-speaking countries before the metric system became standard. The US has kept it for everyday use, while science and most other countries use Celsius. The conversion is straightforward, so both systems coexist without practical difficulty in most contexts.
Related
Formula used
in c | Temperature in Celsius | °C | 20 | -273.15 | 1000 out f | Temperature in Fahrenheit | °F | c * 9 / 5 + 32 | 1 out k | Temperature in Kelvin | K | c + 273.15 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works