Calculate fuel economy in kilometres per litre (km/L) by dividing the distance travelled by the fuel used. Enter kilometres and litres to get your result, then use the same method with a consistent fill-up routine to compare trips or vehicles.
Formula
Fuel economy in km/L = distance travelled in kilometres ÷ fuel consumed in litres.
- d is the distance travelled, in kilometres (km). It must be zero or greater.
- f is the fuel consumed, in litres (L). It must be greater than zero; dividing by zero is undefined.
- kpl is the calculated fuel economy, in kilometres per litre (km/L).
For example, if a vehicle travels 100 km and uses 8 L, the calculation is 100 km ÷ 8 L = 12.50 km/L. The calculator rounds the result to two decimal places. It accepts distance in kilometres and fuel in litres, so convert other units before entering them.
Worked Example
Using the calculator’s default values—100 km travelled and 8 L used:
- Write the formula: fuel economy = distance ÷ fuel.
- Substitute the values: 100 km ÷ 8 L.
- Calculate: 100 ÷ 8 = 12.5 km/L.
- Show the result to two decimal places: 12.50 km/L.
Assumptions
- The distance and fuel amount refer to the same trip or measurement period.
- The entered fuel amount represents fuel consumed, rather than the fuel remaining in the tank.
- Distance is measured in kilometres and fuel volume in litres; no unit conversion is applied by the calculator.
- The result is an average over the entered distance, not a prediction of economy for every road or driving condition.
What You’ll Need
- A distance reading in kilometres, usually from the vehicle’s trip meter or odometer.
- The amount of fuel consumed in litres. A consistent full-to-full refill record is a practical way to estimate it.
- A calculator, or the calculator above.
Step-by-Step
- Choose the distance period. Decide which journey or interval you want to measure. For a single trip, note the starting and ending odometer readings. For a tank-to-tank estimate, begin at a refill and record the odometer reading.
- Find the distance travelled. Subtract the starting reading from the ending reading. For example, an odometer reading of 24,360 km at the end minus 24,110 km at the start gives 250 km travelled. If your trip meter already shows the distance, use that figure.
- Measure the fuel used over that same distance. For a tank-to-tank check, refill to a consistent level at the beginning and note the amount added at the next comparable refill. The litres added at the second refill estimate the fuel used since the first, provided the tank was filled consistently. Do not treat the tank’s total capacity as the amount consumed.
- Make sure the units match the formula. Enter distance in kilometres and fuel in litres. If your distance is in miles, convert it to kilometres by multiplying miles by 1.609344. If fuel is recorded in US gallons, convert to litres by multiplying by 3.785411784; for Imperial gallons, multiply by 4.54609. Check which gallon unit applies.
- Divide distance by fuel. Use: km/L = kilometres travelled ÷ litres used. For 250 km and 20 L, 250 ÷ 20 = 12.5 km/L.
- Enter the values and read the result. Put the distance in the first input and the fuel used in the second. The displayed result is the average kilometres travelled per litre for those inputs.
- Keep adequate precision while calculating. Use the measured values rather than rounding them first. Round the final figure for reporting, typically to two decimal places, and record the original distance and litres so you can check the calculation later.
- Repeat measurements for a useful comparison. One trip may be affected by traffic, weather, road type, load, or driving style. Compare several measurements made with a similar refill method and driving conditions for a more representative picture.
How to Read the Result
A result of 12.50 km/L means the vehicle travelled an average of 12.5 kilometres for each litre of fuel used over the measured interval. A higher km/L figure indicates more distance per litre, when the measurements and conditions are comparable. It does not mean the vehicle will achieve that figure on every journey.
Km/L is the inverse of litres per 100 kilometres (L/100 km). To convert km/L to L/100 km, calculate 100 ÷ km/L. For instance, 12.5 km/L corresponds to 8 L/100 km. These units describe the same fuel use in different ways: km/L rises as efficiency improves, while L/100 km falls.
Common Mistakes
- Mixing units: Dividing miles by litres does not give km/L. Convert distance and fuel units first.
- Using fuel capacity instead of fuel consumed: A tank’s capacity is not the amount used on a trip. Use a measured consumption amount or consistent refill records.
- Comparing mismatched periods: The distance and fuel must cover the same interval. Do not combine a trip-meter distance with litres from an unrelated fill-up.
- Dividing in the wrong order: For km/L, divide kilometres by litres. Dividing litres by kilometres produces L/km, a different unit.
- Over-rounding: Rounding the distance or litres before dividing can change the result, especially for short trips. Keep the recorded values and round only the final answer.
- Assuming one result is universal: Short journeys, idling, hills, congestion, temperature, tyre condition, vehicle load, and driving habits can all change measured fuel economy.
Tips
- For a repeatable tank-to-tank estimate, refill at a similar point—such as the first automatic stop—and use the amount recorded at the next refill as an estimate of fuel consumed. Avoid topping off, which can make fill levels inconsistent.
- Record the odometer reading, litres added, date, and any unusual conditions at each refill. Calculate economy over several tanks by dividing the total kilometres by the total litres, rather than simply averaging individual km/L values.
- Use a longer measurement period when possible. Small differences in fill level or fuel volume have a larger effect on a short-distance calculation.
- When comparing vehicles or journeys, use the same units and similar routes, loads, and driving conditions. Treat the result as an observed average, not a guaranteed future figure.
Troubleshooting
- The calculator will not accept the fuel value: Fuel must be greater than zero. Check that you entered litres used, not a blank value or zero.
- The result seems much too high or low: Check whether the distance is in kilometres and the fuel amount is in litres. Confirm you did not enter miles as kilometres, gallons as litres, or a tank capacity as fuel consumed.
- The odometer readings give a negative distance: Check that the ending reading is later and greater than the starting reading. If the counter rolled over or was reset, calculate the distance using the vehicle’s records or trip meter instead.
- Results vary substantially between refills: Check that fills are made to a consistent level and that each fuel amount corresponds to the distance since the prior fill. Then look for different routes, traffic, weather, load, or driving patterns before concluding that the vehicle’s economy changed.
- You only know the litres bought, not the amount consumed: A purchase alone does not establish fuel used for a particular distance unless it completes a comparable refill interval. Start a consistent refill record and calculate after the next refill.
Frequently Asked Questions
How do I calculate km per litre?
Divide the kilometres travelled by the litres of fuel consumed. For example, 300 km ÷ 25 L = 12 km/L.
Is a higher km/L better?
Generally, yes: it means more kilometres travelled per litre. Compare figures measured under similar conditions.
How do I convert km/L to L/100 km?
Divide 100 by the km/L result. For example, 10 km/L equals 10 L/100 km.
Can I use miles and gallons?
Not directly with this calculation. Convert the distance to kilometres and the fuel to litres first, taking care to distinguish US from Imperial gallons.
Why does my calculated result differ from the dashboard?
The dashboard may estimate fuel use using its own sensors and averaging period. Refilling variation, trip length, and measurement methods can also produce differences.
How often should I calculate fuel economy?
For a meaningful average, record each refill and calculate across several tanks. A single measurement is useful for that interval but can be unusually affected by conditions or fill-level differences.
Related
Formula used
in d | Distance travelled | km | 100 | 0 in f | Fuel used | L | 8 | 0.000001 out kpl | Fuel economy | km/L | d / f | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Meters Into Liters Calculator: The Missing Dimension