molecalculator

Moles & Molar Mass

Qt to Liters Conversion: US and Imperial Quarts

Calculator No. 01-6483 · Updated · Formula and assumptions shown below

Liters 0.946353 L
Milliliters
946.353 mL
= Liters × 1000
Quart amount
1 qt
Set in the form below
Quart system
US liquid
Set in the form below
You enter
Quart amount (qt), Quart system
You get
Liters (L), Milliliters (mL)
Rounding
6 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Convert quarts (qt) to liters (L) by multiplying by the quart-to-liter factor: 1 US liquid qt = 0.946352946 L, while 1 Imperial qt = 1.1365225 L. Enter the number of quarts and choose the system to get liters; the calculator also gives the equivalent milliliters.

Formula

Liters = quarts × liters per quart. In symbols, L = qt × F, where qt is the amount in quarts, in qt, and F is the selected conversion factor, in L/qt. Choose F = 0.946352946 L/qt for US liquid quarts or F = 1.1365225 L/qt for Imperial quarts. The quart units cancel, leaving liters. Milliliters are calculated as mL = L × 1000, because 1 L = 1000 mL.

Worked Example

The calculator defaults to 1 US liquid qt. Using its displayed factor:

L = 1 qt × 0.946352946 L/qt = 0.946352946 L

Rounded to the calculator’s six decimal places, the result is 0.946353 L. For the second output:

mL = 0.946352946 L × 1000 = 946.352946 mL

Rounded to three decimal places, that is 946.353 mL. The equivalent US customary relationship is 1 US liquid qt = 946.352946 mL.

Assumptions

  • The amount is a nonnegative number of quarts; the calculator does not accept negative quantities.
  • The quart system is identified correctly as US liquid or Imperial. The selected factor is treated as exact for this calculation.
  • Results are volume conversions, not mass conversions. No liquid density or temperature adjustment is applied.

Which Quart Does “Qt” Mean?

The abbreviation “qt” means quart, but a quart is not the same size everywhere. The United States customary system uses the US liquid quart for ordinary volume measurement. The Imperial quart belongs to the British Imperial system and is larger. A US dry quart is another unit, used for dry-volume measurements, and it is different from the US liquid quart.

These distinctions matter because an unlabeled recipe, historical document, or imported product may not identify its system. Do not assume that every use of “qt” means a US liquid quart. Check the country, the surrounding units, and whether the measurement concerns liquid or dry goods. This calculator covers US liquid and Imperial quarts; it does not calculate US dry quarts.

  • US liquid quart: exactly 0.946352946 L, or 946.352946 mL.
  • Imperial quart: 1.1365225 L, or 1136.5225 mL.
  • US dry quart: approximately 1.10122094 L; use a dry-quart-specific conversion when that unit is intended.

The US liquid quart is one quarter of a US liquid gallon. The Imperial quart is one quarter of an Imperial gallon. Since those gallons differ in size, their quarts do too. The values above follow the defined relationships among the gallon, quart, liter, and milliliter; displayed digits should not be mistaken for a guarantee that a household measuring vessel is equally precise.

How to Convert Quarts to Liters

For a hand calculation, identify the quart system, multiply the quantity by its factor, and round only after the multiplication. For example, 2 US liquid qt × 0.946352946 L/qt = 1.892705892 L, or about 1.893 L. For 2 Imperial qt, use the other factor: 2 × 1.1365225 = 2.273045 L, or about 2.273 L.

To convert liters back to quarts, divide liters by the matching factor. For instance, 1 L ÷ 0.946352946 L/qt is about 1.05669 US liquid qt. Conversion in the reverse direction must use the same system; dividing by the Imperial factor instead would produce a different answer.

Use the calculator when you have a measured or specified quantity and want a direct conversion. It performs arithmetic only: it does not determine how much liquid a recipe needs, account for evaporation, or convert a liquid’s volume into its weight. Those are separate questions.

Choosing Precision and Avoiding Mistakes

Keep a few extra digits during calculation, then round the final result to suit the task. A recipe may be adequately expressed to the nearest 0.01 L or 10 mL; a technical calculation may need more precision, depending on the accuracy of the original measurement. More digits in a converted answer cannot make an imprecise starting measurement more accurate.

  • Check the unit system: confusing US and Imperial quarts creates an error of about 20% for the same numeric quantity.
  • Do not mix quarts with cups or pints: customary unit relationships can differ by system, so convert from the original unit with its own factor.
  • Do not confuse volume with mass: a quart describes volume, while grams and pounds describe mass. Converting between them requires the material’s density.
  • Watch decimal placement: 1 L is 1000 mL, so 0.946 L is about 946 mL, not 94.6 mL.
  • Do not round the factor too early: using 0.95 L per US qt is convenient for a rough estimate but gives a less accurate result.

Frequently Asked Questions

How many liters are in 1 US quart?
One US liquid quart equals 0.946352946 L, or 946.352946 mL. For everyday estimates, it is about 0.946 L.

How many liters are in 1 Imperial quart?
One Imperial quart equals 1.1365225 L, or about 1.137 L. It is larger than a US liquid quart.

Is a quart the same as a liter?
No. A US liquid quart is slightly less than one liter; an Imperial quart is slightly more than one liter. Always identify which quart is meant.

How many liters are in 2 quarts?
It depends on the system: 2 US liquid qt are 1.892705892 L, while 2 Imperial qt are 2.273045 L.

How do I convert liters to quarts?
Divide the liter quantity by 0.946352946 for US liquid quarts, or by 1.1365225 for Imperial quarts. Keep the unit system consistent.

Does this conversion tell me the weight of a quart?
No. Liters and quarts measure volume. To find mass or weight, you also need the substance’s density, which varies by material and may vary with temperature.

Related

Formula used
in qt | Quart amount | qt | 1 | 0
sel sys | Quart system | US liquid=0.946352946, Imperial=1.1365225
out l | Liters | L | qt * sys | 6
out ml | Milliliters | mL | l * 1000 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →