molecalculator

Moles & Molar Mass

Calculate Neutrons: Formula, Steps, and Calculator

Calculator No. 01-0643 · Updated · Formula and assumptions shown below

Neutrons (N) 12 neutrons
Mass number (A)
23
Set in the form below
Atomic number (Z)
11
Set in the form below
You enter
Mass number (A), Atomic number (Z)
You get
Neutrons (N) (neutrons)
Rounding
0 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator works out the number of neutrons in one atom when you enter its mass number and atomic number. The result is the mass number minus the atomic number; for an element with several isotopes, you need to identify the isotope first.

Formula

Neutrons = mass number − atomic number, or N = A − Z.

  • N is the number of neutrons in one atom or nucleus, counted as a whole number.
  • A is the mass number: the total number of protons and neutrons in the nucleus. It has no unit.
  • Z is the atomic number: the number of protons in the nucleus. It has no unit.

Both inputs must be whole-number counts, and a valid isotope must have a mass number at least as large as its atomic number. The calculator uses those limits so the result cannot be a negative neutron count. It does not use an element’s average atomic weight from the periodic table: average atomic weight is not the mass number of a particular atom.

Worked Example

The defaults are for sodium-23: mass number A = 23 and atomic number Z = 11.

  1. Write the formula: N = A − Z.
  2. Substitute the default values: N = 23 − 11.
  3. Subtract: N = 12 neutrons.

The calculator therefore returns 12 neutrons for one sodium-23 atom.

Assumptions

  • The inputs describe one isotope, not an average mixture of isotopes.
  • Mass number and atomic number are whole-number counts of particles in the nucleus.
  • The calculation concerns a neutral atom’s nucleus; changing the atom’s charge does not change its neutron count.

What You’ll Need

  • The element’s name or symbol, so you can find its atomic number, Z.
  • The isotope’s mass number, A, usually shown after a hyphen in a name such as carbon-14, or as the superscript in isotope notation.
  • A periodic table or reliable isotope reference if either number is not provided.

Step-by-Step

  1. Identify the element. Find its chemical symbol or name. The atomic number is fixed for each element: for example, every carbon nucleus has 6 protons, so carbon’s Z is 6. Use a periodic table to look up this number if needed.
  2. Identify the isotope. Look for the mass number in the isotope’s name or notation. In carbon-14, the number 14 is A. In notation such as 14C, the superscript 14 is also the mass number. Do not mistake a subscript or charge for the mass number.
  3. Check the numbers. Confirm that A and Z are whole numbers and that A is not smaller than Z. The number of protons is part of the total number of nuclear particles, so a valid mass number cannot be less than the proton count.
  4. Subtract the atomic number from the mass number. Use N = A − Z. For carbon-14, N = 14 − 6 = 8. That isotope has 8 neutrons per nucleus.
  5. Interpret the answer for the right sample. The result is the neutron count in each atom of that isotope. If a sample contains more than one isotope, calculate each isotope separately; the sample does not necessarily have one shared neutron count per atom.
  6. Enter the values in the calculator, if using it. Put the isotope’s mass number in the mass-number field and the element’s atomic number in the atomic-number field. Check that the output agrees with your subtraction and is a nonnegative whole number.

Common Mistakes

  • Using the periodic-table atomic weight as A. Atomic weights are often decimal values because they reflect the natural abundance of isotopes. The subtraction needs an isotope’s whole-number mass number, not the element’s average atomic weight. For example, carbon’s listed average atomic weight is about 12.011, while carbon-14 has A = 14.
  • Subtracting the mass number from the atomic number. The order is A − Z, not Z − A. Since A includes both protons and neutrons, removing the proton count leaves the neutron count.
  • Confusing atomic number with mass number. The atomic number identifies the element and counts protons. The mass number identifies an isotope and counts protons plus neutrons. They are not interchangeable.
  • Ignoring isotope notation. A chemical symbol alone usually does not identify a single isotope. If you are given only “chlorine,” for example, you cannot calculate one exact neutron count for every chlorine atom without knowing which isotope is meant.
  • Thinking ion charge changes the answer. Gaining or losing electrons creates an ion, but it does not alter the number of protons or neutrons in the nucleus. Use the same nuclear calculation for an atom and its ion unless a nuclear change is specified.

Tips

  • Remember that the mass number is the total: protons + neutrons. Rearranging that relationship gives neutrons = mass number − protons.
  • Use the isotope’s hyphenated name as a quick guide: in uranium-238, 238 is A. Look up uranium’s atomic number, 92, then calculate 238 − 92 = 146 neutrons.
  • Write the element and isotope beside your result, such as “8 neutrons per carbon-14 nucleus.” This prevents a correct number from being attributed to the wrong isotope.
  • Check your result by adding it back to the atomic number. For carbon-14, 8 neutrons + 6 protons = mass number 14.
  • For an isotope mixture, keep individual isotope counts distinct. A weighted average neutron count can describe a mixture mathematically, but it is not the neutron count of a single atom.

Troubleshooting

  • The result is negative: One of the inputs may be reversed, mistyped, or taken from the wrong isotope. Verify that the mass number is at least the atomic number, then calculate A − Z.
  • The calculator rejects an input: Enter a whole number, not a decimal atomic weight, a chemical symbol, or a value with units. Check the isotope reference and use its mass number.
  • You cannot find a mass number: The element name alone may be insufficient. Find the isotope label in the question, table, or source. If the problem gives only an average atomic weight, ask whether it expects a specified isotope or an approximate mass number; do not treat the average as an exact isotope identity.
  • Your answer differs from a reference: Check that both calculations refer to the same isotope. Isotopes of the same element share Z but have different mass numbers and therefore different neutron counts.
  • You get a decimal result: Neutrons are counted as whole particles. A decimal usually means an average atomic weight was used where a mass number was required, or a calculation was rounded or entered incorrectly.

Frequently Asked Questions

How do you calculate neutrons in an element?
For a specified isotope, subtract its atomic number from its mass number: N = A − Z.

Where do I find an element’s atomic number?
Look it up on a periodic table. It is the whole number associated with the element and equals the number of protons in its nucleus.

Is atomic mass the same as mass number?
No. Mass number is a whole-number total for one isotope. Atomic weight is generally a weighted average of isotopes and may be decimal.

How many neutrons does carbon have?
It depends on the isotope. Carbon-12 has 12 − 6 = 6 neutrons, while carbon-14 has 14 − 6 = 8.

Do ions have a different number of neutrons?
Not just because they are ions. Ion formation changes the number of electrons, not the neutron count in the nucleus.

Can an element have different neutron counts?
Yes. Its isotopes have the same atomic number but different mass numbers, so they contain different numbers of neutrons.

Related

Formula used
in a | Mass number (A) | - | 23 | 1
in z | Atomic number (Z) | - | 11 | 1
out n | Neutrons (N) | neutrons | a - z | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →