molecalculator

Moles & Molar Mass

How to Do Conversions in Chemistry (Step-by-Step)

Guide 01-11606 · Updated · Step by step

Chemistry conversions let you move between units—grams to moles, liters to milliliters, or Celsius to Kelvin—so you can use the right numbers in formulas and lab work. This guide walks you through the general method, from reading the given value to rounding the final answer, with worked examples and common pitfalls. You’ll need a periodic table for molar mass and a calculator.

What You’ll Need

  • Periodic table (for atomic masses)
  • Calculator
  • Conversion factors (e.g., 1 mol = 22.4 L at STP, 1 kg = 1000 g)
  • Paper and pencil to track units

Step-by-Step

  1. Identify what you have and what you need. Write down the starting quantity with its unit (e.g., 25.0 g of NaCl) and the target unit (e.g., moles of NaCl).
  2. Find the conversion factor(s). For mass-to-mole conversions, use molar mass from the periodic table. For volume, use metric prefixes (1 mL = 0.001 L). For temperature, use the formulas: °C to K: K = °C + 273.15; °F to °C: °C = (°F − 32) × 5/9.
  3. Set up the conversion as a fraction. Place the unit you want to cancel in the denominator of the conversion factor. For example, to convert grams to moles, write: 25.0 g × (1 mol / 58.44 g).
  4. Multiply and cancel units. Multiply the numbers and cross out units that appear in both numerator and denominator. The remaining unit should be your target.
  5. Do the arithmetic. Divide or multiply as the fraction dictates. For 25.0 g NaCl: 25.0 ÷ 58.44 = 0.4278 mol.
  6. Round to the correct number of significant figures. Use the fewest number of significant figures in any given value. Here, 25.0 has three, so the answer is 0.428 mol.
  7. Check that the answer makes sense. For moles, a small mass (like 25 g) should give a fraction of a mole if the molar mass is large. For temperature, Kelvin should be larger than Celsius by 273.15.

Common Mistakes

  • Forgetting to cancel units—always write them out.
  • Using the wrong conversion factor (e.g., 1 mol = 22.4 L only at STP, not at room temperature).
  • Mixing up molar mass (g/mol) with mass (g). Molar mass is a ratio, not a quantity.
  • Not converting within metric prefixes correctly (1 mL = 0.001 L, not 1000 L).
  • Rounding too early—keep intermediate values with extra digits, round only the final answer.

Tips

  • Always write the conversion factor with units, even if you think you remember it.
  • Use dimensional analysis: treat units as algebraic variables that cancel.
  • For multi-step conversions (e.g., grams to molecules), chain factors: g → mol → molecules.
  • Memorize common metric prefixes: kilo (10³), centi (10⁻²), milli (10⁻³), micro (10⁻⁶).
  • When converting temperature, use the exact formulas—do not approximate 273 instead of 273.15 unless your data allows it.

Troubleshooting

If your answer looks wrong (e.g., negative mass, absurdly large number), check:

  • Unit cancellation: Did you invert a fraction? For example, to go from mL to L, multiply by 0.001, not divide by 0.001.
  • Molar mass calculation: Did you add atomic masses correctly? For NaCl, Na is 22.99, Cl is 35.45, total 58.44 g/mol.
  • Significant figures: Did you round too early? Keep at least one extra digit until the end.
  • Temperature conversion: Did you forget to add 273.15? 0°C is 273.15 K, not 273 K (though 273 is often used in quick estimates, it’s not exact).
  • Check your calculator entry: Parentheses matter. For 25.0 / 58.44, enter 25.0 ÷ 58.44, not 25.0 ÷ (58.44 × 1).

Frequently Asked Questions

How do I convert grams to moles?

Divide the mass by the molar mass. For example, 18.0 g of water (molar mass 18.02 g/mol) is 18.0 ÷ 18.02 = 0.999 mol.

What is the difference between molar mass and molecular weight?

They are numerically the same, but molar mass has units of g/mol, while molecular weight is often unitless (relative). In conversions, use g/mol.

How do I convert between Celsius, Fahrenheit, and Kelvin?

Use: K = °C + 273.15; °F = (°C × 9/5) + 32; °C = (°F − 32) × 5/9. Never mix them without conversion.

When do I use 22.4 L/mol?

That is the molar volume of an ideal gas at STP (0°C, 1 atm). At room temperature (25°C), it’s about 24.5 L/mol. Always check conditions.

How do I convert between metric prefixes?

Move the decimal point: 1 km = 1000 m, 1 m = 100 cm, 1 cm = 10 mm, etc. For area or volume, square or cube the factor (1 m² = 10⁴ cm², 1 m³ = 10⁶ cm³).

What if my conversion has multiple steps?

Chain them together. For example, to convert 2.5 kg of NaCl to formula units: 2.5 kg → 2500 g → moles (÷58.44) → molecules (×6.022×10²³).

Assumptions

This guide assumes standard conditions for gas conversions (STP) when using 22.4 L/mol, and that molar masses are taken from the periodic table’s average atomic weights. For temperature, it uses exact conversion constants. Always check the context of your problem for specific conditions.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →