This calculator finds the equilibrium constant in terms of partial pressures, Kp, for a gas-phase reaction. You enter the balanced reaction’s stoichiometric coefficients and the equilibrium partial pressures of each gas, and it returns Kp with the correct units (or dimensionless if you use standard pressures). This is the key number that tells you whether products or reactants dominate at equilibrium.
Formula
For a general gas-phase reaction:
aA + bB ⇌ cC + dD
the equilibrium constant in terms of partial pressures is:
Kp = (PCc · PDd) / (PAa · PBb)
where:
- PA, PB, PC, PD are the equilibrium partial pressures of each gas (in atm, bar, or kPa – but you must use the same unit throughout).
- a, b, c, d are the stoichiometric coefficients from the balanced equation (positive integers).
The unit of Kp is (pressure)Δn, where Δn = (c + d) – (a + b). If Δn = 0, Kp is dimensionless.
Worked Example
Consider the reaction: N2(g) + 3H2(g) ⇌ 2NH3(g). At equilibrium at a certain temperature, the partial pressures are:
PN2 = 0.500 atm, PH2 = 0.800 atm, PNH3 = 1.200 atm.
Here a = 1 (N2), b = 3 (H2), c = 2 (NH3), d = 0 (no D).
Plug into the formula:
Kp = (PNH32) / (PN21 · PH23)
= (1.2002) / (0.5001 · 0.8003)
= (1.44) / (0.500 · 0.512)
= 1.44 / 0.256
= 5.625
The calculator gives 5.625 (rounded to 4 decimals). The unit is atm2 – 4 = atm–2, so Kp = 5.625 atm–2.
Assumptions
- All species are ideal gases – real gases deviate at high pressure or low temperature.
- The reaction is at equilibrium – the pressures you enter must be equilibrium values, not initial or current.
- The balanced equation is written with the smallest whole-number coefficients – Kp depends on the stoichiometry.
- All partial pressures are measured in the same unit (atm, bar, kPa).
When to Use This
Use Kp when your reaction involves gases and you have partial pressures. If you have concentrations (mol/L) instead, use Kc. The two are related by Kp = Kc(RT)Δn, where R = 0.0821 L·atm/(mol·K) and T is in kelvin. This calculator is for pure gas-phase equilibria – if you have solids or liquids, their activities are 1 and they do not appear in the expression.
How to Read the Result
- If Kp >> 1 (e.g., > 103), products dominate at equilibrium.
- If Kp << 1 (e.g., < 10–3), reactants dominate.
- If Kp is between ~0.01 and 100, both sides are significant.
- Kp is temperature-dependent – it changes with T, so always note the temperature.
Common Mistakes
- Using initial or non-equilibrium pressures – only equilibrium values work.
- Forgetting to raise each pressure to its stoichiometric coefficient.
- Using different pressure units across the expression – convert all to the same unit.
- Omitting the exponent for species with coefficient 1 (it’s fine, but don’t drop it for others).
- Forgetting that solids and pure liquids are not included in the expression.
- Confusing Kp with Kc – they are different unless Δn = 0.
Tips
- Always write the balanced equation first – the coefficients are the exponents.
- Check that Δn is correct: sum of product coefficients minus sum of reactant coefficients.
- If you have a reverse reaction, Kp for the reverse is 1/Kp for the forward.
- If you multiply the whole equation by a factor, Kp is raised to that factor’s power.
- Use standard pressure (1 atm or 1 bar) if you want a dimensionless Kp – but that requires dividing each pressure by the standard pressure. This calculator uses raw pressures, so units appear unless Δn = 0.
Troubleshooting
Result is negative or zero? Partial pressures must be positive. Check that you entered positive numbers – the calculator rejects zero or negative inputs.
Result seems too large or too small? Double-check your coefficients – a common error is swapping product and reactant coefficients. Also verify that the pressures are in the same unit.
Unit mismatch? If you mixed atm and kPa, convert: 1 atm = 101.325 kPa. Use one unit throughout.
You have a solid or liquid in the reaction? Its activity is 1, so omit it from the expression. For example, CaCO3(s) ⇌ CaO(s) + CO2(g) has Kp = PCO2.
You don’t have equilibrium pressures? You need to solve an ICE table first. This calculator only works with given equilibrium partial pressures.
Frequently Asked Questions
Q: What is the difference between Kp and Kc?
A: Kp uses partial pressures of gases; Kc uses molar concentrations. They are related by Kp = Kc(RT)Δn.
Q: Can Kp have units?
A: Yes, if Δn ≠ 0, Kp has units of (pressure)Δn. In thermodynamic equilibrium constants, you would divide by standard pressure to make it dimensionless, but in general chemistry, we often leave the units.
Q: What if the reaction has a coefficient of zero?
A: That means the species is not present – leave its pressure as 0, but the calculator will treat 0^0 as 1 (since d=0, the term PD0 = 1). So it’s fine.
Q: Does temperature affect Kp?
A: Yes, Kp is temperature-dependent. It changes with T according to the van’t Hoff equation. Always report the temperature at which Kp was measured.
Q: How do I find Kp from Kc?
A: Use Kp = Kc(RT)Δn, where R = 0.0821 L·atm/(mol·K) if pressures are in atm, and T is in kelvin.
Q: What if I have a mixture of gases but not all are involved in the reaction?
A: Only include the partial pressures of the gases that appear in the balanced equation. Inert gases do not appear in the equilibrium expression.
Related
Formula used
in a | Stoichiometric coefficient of A | - | 1 | 0 in b | Stoichiometric coefficient of B | - | 3 | 0 in c | Stoichiometric coefficient of C | - | 2 | 0 in d | Stoichiometric coefficient of D | - | 0 | 0 in pA | Equilibrium partial pressure of A | atm | 0.500 | 0 in pB | Equilibrium partial pressure of B | atm | 0.800 | 0 in pC | Equilibrium partial pressure of C | atm | 1.200 | 0 in pD | Equilibrium partial pressure of D | atm | 1.000 | 0 out kp | Kp (using atm) | (atm)^(c+d-a-b) | (pC^c * pD^d) / (pA^a * pB^b) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Within 10 Percent Calculator – How to Use It5.00 %
- W/W Percentage Calculator: Formula & Examples2.92 %
- Percent Equation: Formula & How to Use It
- Percent of a Number Calculator: Find It Instantly20.00 %
- UWW GPA Calculator: How to Compute Your GPA
- PPM to w/w Calculator: Convert Easily5.0000 %