molecalculator

Moles & Molar Mass

S/Z Ratio Calculator: Find and Interpret Your Result

Calculator No. 01-4128 · Updated · Formula and assumptions shown below

S/Z ratio 1.00
Sustained “s” duration
15 s
Set in the form below
Sustained “z” duration
15 s
Set in the form below
You enter
Sustained “s” duration (s), Sustained “z” duration (s)
You get
S/Z ratio
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The s/z ratio compares how long you can sustain the voiceless “s” sound with the voiced “z” sound, giving a simple screening measure of airflow and vocal-fold function. Enter the two durations in seconds to calculate the ratio; a result near 1 means the sounds lasted for similar lengths, but it is not a diagnosis.

Formula

S/Z ratio = duration of /s/ ÷ duration of /z/. Here, s is the longest valid sustained /s/ duration in seconds, and z is the longest valid sustained /z/ duration in seconds. The calculator reports the quotient to two decimal places. Its inputs must be nonnegative, and the /z/ duration must be at least as long as the /s/ duration; the expression’s square-root check makes it return “Cannot compute” if the entered /s/ time is greater.

Worked Example

Using the calculator’s default values:

  1. Record /s/ duration: s = 15 s.
  2. Record /z/ duration: z = 15 s.
  3. Divide the /s/ time by the /z/ time: 15 s ÷ 15 s = 1.
  4. Because the units cancel, the result is a ratio with no unit: S/Z ratio = 1.00.

Assumptions

  • Both sounds are measured in seconds using the same timing method.
  • The durations represent valid sustained sounds produced in comparable conditions.
  • The ratio is a screening measure, not a stand-alone diagnosis or a substitute for a voice evaluation.

What You’ll Need

  • A quiet place where you can make a sustained sound without interruption.
  • A timer or stopwatch that displays seconds.
  • A way to record your results, such as paper or a note-taking app.
  • If available, a speech-language pathologist or other qualified voice professional to guide interpretation.

Use the calculator for a simple comparison, not to diagnose a voice disorder or decide whether treatment is needed. In a typical screening, a ratio around 1 is expected; an elevated value can be a reason to seek professional assessment, but age, effort, technique, and health can affect the result. A clinician may combine this measure with other voice and breathing assessments.

Step-by-Step

  1. Get settled. Sit or stand comfortably in a quiet space. Keep your head level and shoulders relaxed. Avoid deliberately taking an unusually large breath; use a comfortable, full breath similar to what you would use for ordinary speech.
  2. Understand the two sounds. /s/ is the unvoiced sound at the beginning of “sun”: air passes through a narrow opening, with no vocal-fold vibration. /z/ is the voiced sound at the beginning of “zoo”: the tongue and mouth shape are similar, but the vocal folds vibrate. The goal is to sustain each sound steadily, not to say a word repeatedly.
  3. Time the /s/ sound. Start the timer as soon as a clear, steady /s/ begins. Keep it even and comfortable, then stop timing when the sound ends or you need to breathe. Record the duration in seconds. Do not strain to extend the sound.
  4. Rest, then time /z/. Take a short rest so your voice and breathing can return to a comfortable state. Sustain a steady /z/ and time it using the same start and stop rules. Record the result in seconds.
  5. Repeat consistently. For a more dependable informal measurement, take up to three comfortable attempts for each sound, with brief rests between attempts. Use the longest clear, steady duration for each sound. Do not count a noisy start, a trailing breath, or a sound that changes into another sound.
  6. Enter the values. Put the selected /s/ duration in the “Sustained ‘s’ duration” field and the /z/ duration in the “Sustained ‘z’ duration” field. Enter seconds, not minutes or milliseconds. If you timed in another unit, convert first: 1 minute = 60 seconds and 1 millisecond = 0.001 seconds.
  7. Read the ratio. The calculator divides /s/ duration by /z/ duration. For example, if /s/ lasts 12 seconds and /z/ lasts 15 seconds, the ratio is 12 ÷ 15 = 0.80. The unit cancels, so the answer is dimensionless. A result of 1.00 means the two recorded durations are equal.
  8. Interpret cautiously. A ratio close to 1 is commonly considered typical in basic screening, while a notably higher ratio may suggest that voiced duration is shorter than expected. Do not treat any single cutoff as a diagnosis. If the result is repeatedly elevated, or you have ongoing voice or breathing concerns, discuss it with a qualified professional.

Common Mistakes

  • Reversing the division. The calculation is /s/ divided by /z/, not /z/ divided by /s/. Check the labels before entering values.
  • Mixing units. Enter both times in seconds. Mixing a value in milliseconds with one in seconds can make the ratio wrong by a factor of 1,000.
  • Using unlike attempts. Comparing a strained /s/ with a relaxed /z/, or using different posture or breath effort, makes the result less meaningful. Use comfortable, comparable attempts.
  • Timing silence or breath noise. Start and stop with the clear sound itself. Do not include the inhale before the sound or an unvoiced breath after it ends.
  • Overinterpreting a decimal. The calculator displays two decimal places, but that precision does not mean the test is accurate to a hundredth. Stopwatch timing and natural variation limit precision.
  • Forcing a result. Do not push through discomfort, dizziness, or breathlessness to achieve a longer time. Stop and return to normal breathing.

Tips

  • Use the same timer, posture, room, and timing rules for both sounds and for any later comparison.
  • Make each sound clear and steady at a comfortable loudness. A very loud or very soft sound may change how long you can sustain it.
  • Write down each attempt rather than relying on memory. Note whether an attempt was interrupted or sounded unstable.
  • If someone is helping, ask them to time without coaching you to hold the sound longer. For a formal evaluation, follow the clinician’s instructions instead.
  • Think of the ratio as one piece of information. It does not directly measure lung capacity, vocal-fold health, or the cause of a voice problem.

Troubleshooting

  • The calculator says “Cannot compute.” Confirm that the /s/ duration is not greater than the /z/ duration and that both fields contain nonnegative numbers in seconds. This calculator applies that input check to avoid treating an inverted or inconsistent pair as a valid screening result. If your measured /s/ really was longer, repeat the attempts using consistent timing; do not change the numbers just to make the result appear.
  • The sound cuts off immediately. Check that you are breathing comfortably and understand how to form the sound. Do not force it. If you cannot sustain a sound or have breathing difficulty, stop and seek guidance from a qualified professional.
  • Repeated attempts differ widely. Rest, reduce distractions, use a steady comfortable loudness, and repeat only if it feels safe. Large variation can reflect technique or fatigue; report the range to a clinician rather than selecting a result to match expectations.
  • The result seems unusually high. Verify the sound labels and units, then recalculate using clear attempts. If an elevated ratio persists, arrange a voice assessment. A calculator cannot determine the cause.
  • You feel dizzy, strained, or short of breath. Stop immediately, breathe normally, and do not repeat the test until you feel fully recovered. Do not perform sustained-sound testing if a health professional has told you to avoid it.

Frequently Asked Questions

What does the s/z ratio measure?
It compares the sustained duration of unvoiced /s/ with voiced /z/. It is used as a simple screening measure related to voice and airflow, not as a diagnosis.

What is a normal s/z ratio?
A value near 1 is commonly expected in basic screening. Interpretation depends on the person and testing method, so a cutoff should not be used alone to identify a disorder.

What does a high s/z ratio mean?
It means the recorded /s/ duration is relatively long compared with /z/. This can be a reason for further assessment, but it does not identify a specific cause.

Can the ratio be less than 1?
Mathematically, yes, if /z/ lasts longer than /s/. This calculator requires /z/ to be at least as long as /s/ for its screening input check; if your measurements give the opposite order, repeat them consistently and ask a clinician how to interpret them.

How many times should I repeat the test?
For an informal check, up to three comfortable attempts per sound can help reveal variation. Use the longest clear attempt for each sound, and stop if you feel strained or unwell.

Does an s/z ratio diagnose a voice disorder?
No. It is only one screening measure. A qualified professional uses a fuller evaluation and your symptoms to decide whether follow-up is needed.

Related

Formula used
in s | Sustained “s” duration | s | 15 | 0
in z | Sustained “z” duration | s | 15 | 0
out ratio | S/Z ratio | - | s / z | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →