At STP, one mole of an ideal gas occupies about 22.4 L under the traditional chemistry convention of 0 °C and 1 atm. Use the calculator below to find the volume from the amount of gas and the selected STP pressure; it returns the volume in liters, with temperature fixed at 273.15 K.
Formula
The ideal gas law is PV = nRT. Rearranging for volume gives V = nRT/P. In this calculator, the equivalent expression is V = n × 0.0820574 × 273.15 ÷ P, where V is volume in liters, n is amount in moles, P is pressure in atmospheres, and the fixed temperature T is 273.15 K (0 °C). The gas constant R is 0.0820574 L·atm/(mol·K). The pressure selector uses atmospheres in the calculation: 1 atm = 1 atm, 100 kPa = 0.986923 atm, and 1 bar = 0.986923 atm. The second output, molar volume V/n, is the volume per mole at the selected conditions.
Worked Example
With the default inputs, n = 1 mol and P = 1 atm:
- Convert the temperature: 0 °C + 273.15 = 273.15 K.
- Calculate the volume: V = (1 mol × 0.0820574 L·atm/(mol·K) × 273.15 K) ÷ 1 atm = 22.41396981 L, which rounds to 22.414 L.
- Calculate molar volume: 22.41396981 L ÷ 1 mol = 22.41396981 L/mol, which rounds to 22.414 L/mol.
Assumptions
- The gas behaves ideally, so molecular size and intermolecular attractions are treated as negligible.
- Temperature is fixed at 0 °C (273.15 K); pressure is the selected STP convention.
- The amount entered is in moles. The result is a calculated equilibrium volume, not a container size or a measured gas volume.
Why STP Has More Than One Meaning
STP stands for standard temperature and pressure, but the phrase has not always referred to one universal pressure. In many general-chemistry textbooks, STP means 0 °C and 1 atm (101.325 kPa). Under that convention, the ideal-gas molar volume is 22.41396981 L/mol, commonly rounded to 22.4 L/mol.
Some organizations and reference contexts use a standard pressure of 100 kPa instead. At 0 °C and 100 kPa, the molar volume is about 22.711 L/mol. A bar is exactly 100 kPa, so the 100 kPa and 1 bar choices give the same result to the precision used here. Always check how a source defines STP before comparing values. The temperature alone does not determine the volume: pressure matters too.
Using the Calculator and Reading the Result
Enter the amount of gas in moles and choose the pressure convention specified by your problem or reference. The first result is the total volume in liters. The second is the molar volume for those same conditions. For example, at 1 atm and 0 °C, 2 mol gives about 44.828 L, twice the one-mole volume. This direct proportionality follows from the ideal gas law when pressure and temperature remain unchanged.
If you know a gas sample’s mass rather than its amount in moles, convert mass to moles first: n = mass ÷ molar mass. The molar mass depends on the gas’s chemical identity. For a gas mixture, the equation applies to total moles for its total volume under the ideal-mixture approximation; it does not give each component’s partial pressure unless additional information is supplied.
When the 22.4 L Rule Is Useful—and Its Limits
The familiar 22.4 L per mole is a convenient estimate for introductory stoichiometry and gas-volume comparisons at 0 °C and 1 atm. If a reaction equation relates gas amounts in moles, you can convert those amounts to volumes at STP using the same molar volume, provided the gases are treated as ideal and compared at the same conditions. Keep significant figures consistent with the data in the problem rather than implying that 22.4 L/mol is exact.
Real gases do not follow PV = nRT perfectly. Their measured volumes can differ, especially at high pressure or near condensation, where molecules’ finite size and attractions become more important. At ordinary conditions, many gases are close enough to ideal for routine estimates, but precision work may require a real-gas equation or measured data. The calculator intentionally does not apply such corrections.
Common Mistakes and Related Conversions
- Mixing STP conventions: 22.4 L/mol refers to 0 °C and 1 atm, not 0 °C and 100 kPa.
- Forgetting that volume scales with amount: 22.4 L is for approximately one mole, not every gas sample.
- Using Celsius directly in the gas law: temperatures in PV = nRT must be absolute temperatures in kelvin. Here the conversion is 0 °C + 273.15 = 273.15 K.
- Assuming a gas has the same volume at all pressures: for a fixed amount and temperature, volume varies inversely with pressure in the ideal-gas model.
For a volume reported in milliliters, multiply liters by 1,000; for cubic meters, divide liters by 1,000. These are unit conversions, not changes in the physical conditions. If you are given a non-STP temperature or pressure, use the full gas law with the actual kelvin temperature and pressure rather than this fixed-temperature calculator.
Frequently Asked Questions
What is the volume of one mole of an ideal gas at STP?
It is about 22.4 L at 0 °C and 1 atm. At 0 °C and 100 kPa, it is about 22.7 L.
Why do some sources say 22.7 L instead of 22.4 L?
They use a different standard pressure. Lowering pressure from 1 atm to 100 kPa slightly increases the ideal-gas volume at the same temperature.
Does every gas occupy 22.4 L at STP?
No. That is the ideal-gas volume for one mole under the stated conditions. A different amount has a proportionally different volume, and real gases may deviate from the ideal prediction.
What is the formula for gas volume at STP?
Use V = nRT/P. At 0 °C and 1 atm, this becomes V = n × 0.0820574 × 273.15 ÷ 1, with V in liters and n in moles.
How many liters are in a mole of gas at STP in a school problem?
Unless the problem defines STP differently, many school problems expect 22.4 L/mol for 0 °C and 1 atm. Follow the stated convention and significant-figure instructions.
Related
Formula used
in n | Amount of gas | mol | 1 | 0 sel p | STP pressure | 1 atm=1, 100 kPa=0.986923, 1 bar=0.986923 out v | Ideal gas volume | L | n * 0.0820574 * 273.15 / p | 3 out vm | Molar volume | L/mol | 0.0820574 * 273.15 / p | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Meters Into Liters Calculator: The Missing Dimension