molecalculator

Moles & Molar Mass

In Progress Grade Calculator: How to Use It

Calculator No. 01-12043 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

An in-progress grade calculator works out your current course grade from the grades you have so far and the weight each assignment or exam carries. You enter each completed grade and its weight (or points), plus your target grade if you want to know what you need on remaining work, and it returns your running average and the score required on future assessments. Below is a working calculator that does exactly that, followed by a full explanation of the math, common mistakes, and how to read the results.

Formula

The core calculation is a weighted average. If you have n graded items, each with a score gi (as a percentage) and a weight wi (as a percentage of the total course grade), your current grade is:

Current Grade = (Σ gi × wi) / (Σ wi)

Here, Σ means “sum over all graded items.” The weights might be the percentages your syllabus lists (e.g., homework 20%, midterm 30%, final 50%). If you have points instead of weights, the same formula works if you replace weight with points earned and total points possible—the result is the same because points are just a different way of expressing weight.

To find what you need on the remaining work to hit a target grade, use:

Required on Remaining = (Target – Current × (Weight Completed / 100)) / (1 – Weight Completed / 100)

where Weight Completed is the sum of the weights of the items you’ve already taken (as a percentage of the total course). This formula assumes the remaining work carries the rest of the weight (100% – Weight Completed).

Worked Example

Using the calculator defaults:

  • Grade 1: 85% with weight 20%
  • Grade 2: 92% with weight 30%
  • Grade 3: 78% with weight 25%
  • Target final grade: 90%

Step 1: Compute the weighted sum.
(85 × 20) + (92 × 30) + (78 × 25) = 1700 + 2760 + 1950 = 6410

Step 2: Sum the weights.
20 + 30 + 25 = 75

Step 3: Divide to get the current grade.
6410 / 75 = 85.4666… ≈ 85.47%

So your current grade is 85.47%.

Step 4: Find the required score on remaining work.
Weight completed = 75%, so remaining weight = 25%.
Required = (90 – 85.47 × (75/100)) / (25/100)
= (90 – 64.10) / 0.25
= 25.90 / 0.25 = 103.60%

That means you would need 103.60% on the remaining work—impossible if the max is 100%. The calculator shows this as a number over 100, which tells you the target is out of reach unless there’s extra credit.

Assumptions

  • All grades are on the same scale (typically 0–100%). If your grades are letters, convert them to numeric values first (e.g., A=90, B=80).
  • Weights are percentages that sum to 100% across the whole course. If your syllabus weights sum to less than 100% (e.g., “other” category), add that as an extra item with a grade of 0 or adjust accordingly.
  • The remaining work carries exactly the leftover weight (100% – sum of completed weights).
  • No extra credit or dropped scores are considered unless you include them manually.

When to Use an In-Progress Grade Calculator

Use it any time you want a snapshot of where you stand in a course:

  • Mid-semester check: After a few assignments and one exam, see if you’re on track for your target (e.g., an A).
  • Before a final exam: Determine the minimum score you need on the final to pass or achieve a desired grade.
  • After a bad grade: See how much a low score pulled you down and whether you can recover.
  • When comparing courses: See which course needs more attention based on your current standing.

The calculator is also useful for planning: if you know you can score 90% on the final, you can work backward to see what your final grade would be.

How to Read the Results

The first output, Current Grade, is your weighted average of all completed work. It is the grade you would have if the course ended today (assuming no future work).

The second output, Needed on Remaining Work, is the average percentage you must score on all future assignments, quizzes, and exams combined to hit your target. For example, if it says 85%, you need to average 85% on everything left. If it says 105%, the target is mathematically impossible without extra credit or a curve.

Note that the “remaining work” is treated as one block. If you have several items left, you need to think of the average across them. For instance, if you need 85% on the remaining 40% of the course, and you have a final worth 30% and a project worth 10%, you could score 90% on the project and 84% on the final to average 85% (0.10×90 + 0.30×84 = 9 + 25.2 = 34.2, which is 85% of 40).

Common Mistakes and Misconceptions

  • Using unweighted averages: If your course weights exams at 50% and homework at 10%, you can’t just average all your scores. A 95% on homework and a 70% on a midterm does not give a 82.5%—the midterm counts much more.
  • Mixing points and percentages: If you enter points for one item and percentages for another, the result is meaningless. Stick to one system.
  • Forgetting to convert letter grades: A “B+” isn’t a number. Use your school’s scale (e.g., B+ = 87) or the 4.0 scale if your course uses that.
  • Assuming the final is the only thing left: If you have a project, quizzes, and a final, the “remaining” number is the average across all of them, not just the final.
  • Rounding too early: Round only at the end. If you round 85.47% to 85% and then compute the required score, you’ll get a slightly different (and less accurate) answer.

A common misconception is that you can “average” your way to a target with simple arithmetic. For example, if you have a 70% and a 90%, the average is 80%, but if the 70% is worth 80% of the grade, your current grade is 74%, not 80%. Always use weights.

How to Choose the Right Weights

Your syllabus is the authority. Look for a section titled “Grading” or “Assessment.” It will typically list percentages like:

  • Homework: 15%
  • Quizzes: 10%
  • Midterm 1: 20%
  • Midterm 2: 20%
  • Final: 35%

If your syllabus uses points instead of percentages, you can still use the calculator: enter the points earned as the grade and the total points possible as the weight. For example, if you got 18 out of 20 on a quiz, enter grade = 90 (18/20×100) and weight = 20 (the points possible). The formula works because the weight is proportional to the total points.

If your syllabus is unclear, ask your instructor. Guessing weights can lead to a false sense of security.

Limitations and Edge Cases

The calculator assumes a simple weighted average, which is the most common grading scheme. However, some courses use:

  • Dropped lowest scores: The calculator doesn’t know which scores will be dropped. You need to manually adjust by excluding the lowest score(s) from your inputs.
  • Curves: If your instructor curves grades, the calculator can’t predict the curve. The result is only as accurate as the non-curved scores.
  • Extra credit: The required score might be over 100%, but extra credit could still get you to the target. The calculator doesn’t include extra credit unless you add it as a grade with weight.
  • Pass/fail or checkmarks: If a course is pass/fail, a percentage may not be meaningful. Use the calculator only for graded work.

Also, the “needed on remaining” formula assumes that the remaining work is a single block. If you have multiple items, you need to plan the average across them, as described above.

Frequently Asked Questions

Q: Can I use this calculator for a class that uses points instead of percentages?
Yes. Enter the points earned as the grade (converted to a percentage if you want) and the total points possible as the weight. For example, if you got 42 out of 50 on a test, enter grade = 84 and weight = 50. The result will be the same as if you used percentages, because the weight is proportional.

Q: What if my weights don’t add up to 100%?
If you haven’t completed all categories, that’s fine—the calculator uses the sum of the weights you entered for the current grade. For the “needed on remaining” calculation, it assumes the remaining weight is 100% minus the sum of entered weights. If your syllabus has a category you haven’t entered (like “participation” that you haven’t received a grade for yet), you should include it with a grade of 0 or estimate it, otherwise the remaining weight will be overstated.

Q: How do I convert a letter grade to a number?
Use your school’s scale. A common one is A=90–100, B=80–89, C=70–79, etc. For plus/minus, use the midpoint (e.g., B+ = 87, B- = 82). If your school uses a 4.0 scale, convert to a percentage using the equivalent (e.g., 3.7 = 90%).

Q: What does it mean if the required score is over 100%?
It means that, with the grades you have and the weights as entered, it is mathematically impossible to reach your target without extra credit or a curve. For example, if you need 103%, you can’t do it on a 100-point scale. You might adjust your target or look for extra credit opportunities.

Q: Can this calculator predict my final grade if I know what I’ll get on future assignments?
Yes, but you have to do a separate calculation. Enter your current grades and weights, then instead of using the target, you can manually add the future grades as additional inputs. The calculator only computes the required score for a target, not the final grade with future scores. To get the final grade, you can use the current grade formula with all items included.

Q: Why does my instructor’s gradebook show a different number?
Instructors may use different rounding rules, drop scores, or have a weighted scheme that includes categories you haven’t entered. Also, some gradebooks use a “running total” that includes zeros for ungraded assignments. Check your syllabus and see if any categories are missing or if there’s a “not yet graded” item. If it still doesn’t match, ask your instructor.

Related

Formula used
in g1 | Grade 1 (percent) | % | 85 | 0 | 100
in w1 | Weight 1 (percent of total) | % | 20 | 0 | 100
in g2 | Grade 2 (percent) | % | 92 | 0 | 100
in w2 | Weight 2 (percent of total) | % | 30 | 0 | 100
in g3 | Grade 3 (percent) | % | 78 | 0 | 100
in w3 | Weight 3 (percent of total) | % | 25 | 0 | 100
in target | Target final grade (percent) | % | 90 | 0 | 100
out current | Current grade (weighted average) | % | (g1*w1 + g2*w2 + g3*w3) / (w1 + w2 + w3) | 2
out remaining | Needed on remaining work (percent) | % | (target - (g1*w1 + g2*w2 + g3*w3)/ (w1 + w2 + w3) * (w1+w2+w3)/100) / (1 - (w1+w2+w3)/100) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →