One liter equals approximately 1.056688 quarts (US liquid quarts). To convert liters to quarts, multiply the number of liters by 1.056688; for example, 2 liters is about 2.11 quarts.
Formula
The conversion uses the exact definition of the US liquid quart:
1 US liquid quart = 0.946352946 liters
Therefore, to convert liters (L) to quarts (qt):
qt = L ÷ 0.946352946 or equivalently qt = L × 1.0566882094
Where:
- L = volume in liters (the input)
- qt = volume in US liquid quarts (the result)
The factor 1.056688 is the reciprocal of 0.946352946, rounded for convenience. For most everyday purposes, using 1.057 or even 1.06 gives a close enough answer.
Worked Example
Using the default value of 1 liter from the calculator:
- Start with the volume in liters: 1 L
- Multiply by the conversion factor: 1 × 1.0566882094 = 1.0566882094
- Round to 4 decimal places: 1.0567 qt
The calculator shows 1.0567 qt for the first output. That matches the exact conversion. For 2 liters, the same steps give 2.1134 qt, and for 0.5 liters, 0.5283 qt.
Assumptions
- The conversion uses the US liquid quart, which is the standard quart in the United States for measuring liquids.
- The liter is an SI unit defined as exactly 1 cubic decimeter (0.001 cubic meters).
- The conversion factor is exact based on the international definitions of the liter and the US quart (1 US quart = 57.75 cubic inches, and 1 inch = 2.54 cm exactly).
Why There Are Different Quarts
You may have heard of “dry quarts” or “imperial quarts.” These are different units:
- US liquid quart = 0.946352946 L (used for milk, water, oil, etc.)
- US dry quart = 1.101220942715 L (used for dry goods like berries or grain)
- Imperial quart (UK) = 1.1365225 L (used in the UK and Commonwealth for some liquids)
When someone says “quart” in the US, they almost always mean the liquid quart. In the UK, the imperial quart is larger, so a liter is only about 0.8799 imperial quarts. Always confirm which system you are using, especially when following a recipe or mixing chemicals.
How to Convert Without a Calculator
If you need a quick mental estimate, remember these rough equivalences:
- 1 L ≈ 1.06 qt (a little more than a quart)
- 4 L ≈ 4.23 qt (a bit more than a gallon, since 1 US gallon = 4 quarts = 3.785 L)
- 0.5 L ≈ 0.53 qt (about half a quart)
For a more precise mental math, you can multiply liters by 1 and then add 6% of the liter value. For example, 3 L × 1.06 = 3.18 qt (exact is 3.17). This works well for cooking and everyday measures.
Common Mistakes and Misconceptions
A frequent error is confusing the US liquid quart with the imperial quart. If you use the wrong factor, your result will be off by about 20%, which can ruin a recipe or a lab solution. Another mistake is using the dry quart for liquids—this gives a value about 16% too high.
Also, do not confuse quarts with gallons. There are 4 quarts in a gallon, so if you are converting liters to gallons, divide liters by 3.78541 instead. Some people think a liter is exactly a quart, but it is about 6% larger. That difference matters when measuring engine oil or paint.
Practical Uses for the Conversion
You will need this conversion in many real situations:
- Cooking and baking: Many international recipes use liters, while US recipes use quarts and cups.
- Automotive: Engine oil and coolant are often sold in quarts in the US, but in liters elsewhere.
- Laboratory work: Some lab protocols list volumes in liters, while older US lab glassware is marked in quarts.
- Gardening and home improvement: Soil, paint, and cleaning products may be labeled in either unit.
In a lab, always use a graduated cylinder or volumetric flask for accurate measurement, and check the units on the glassware. Never rely on a “quart” jar for precise work unless you know its exact volume.
Frequently Asked Questions
How many quarts are in 2 liters?
2 liters is about 2.11 US liquid quarts. Multiply 2 by 1.056688 to get 2.113376. For cooking, you can round to 2.1 quarts.
Is a liter bigger than a quart?
Yes, a liter is slightly larger than a US liquid quart. One liter is 1.0567 quarts, so a liter is about 5.7% bigger. In the imperial system, a quart is bigger than a liter (1 imperial quart = 1.1365 L).
How do I convert quarts to liters?
To go the other way, divide the number of quarts by 1.056688, or multiply by 0.946353. For example, 2 quarts × 0.946353 = 1.8927 liters.
What is the difference between a dry quart and a liquid quart?
The US dry quart is about 1.101 liters, while the US liquid quart is 0.946 liters. The dry quart is used for measuring dry volume like berries or grain, but in practice most people use weight for dry goods. The liquid quart is for fluids.
How many liters are in a gallon?
There are 3.78541 liters in one US gallon. Since there are 4 quarts in a gallon, that also means 1 liter is 1/3.78541 = 0.264172 gallons.