molecalculator

Moles & Molar Mass

Mass Number of Glucose: Key Facts & Molar Mass

Calculator No. 01-9875 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The mass number of glucose is not a single value—it depends on which mass you mean. The most commonly asked value is the molar mass of glucose (C6H12O6), which is 180.156 g/mol. If you are asking about the mass number of a single molecule, that is the molecular mass, also 180.156 atomic mass units (u or Da).

Formula

The molar mass (M) of a compound is the sum of the atomic masses of all atoms in its formula. For glucose, C6H12O6:

M = (6 × atomic mass of C) + (12 × atomic mass of H) + (6 × atomic mass of O)

Using IUPAC standard atomic weights: C = 12.011 g/mol, H = 1.008 g/mol, O = 15.999 g/mol.

M = (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol

This value applies to the most common form of glucose, D-glucose. The molar mass is the same for any isomer (e.g., fructose) because they have the same molecular formula.

Worked Example

Using the calculator defaults: you dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in water to make 250 mL of solution. What is the molarity?

  1. Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
  2. Calculate moles of NaCl: 2.922 g ÷ 58.44 g/mol = 0.05000 mol
  3. Calculate molarity: 0.05000 mol ÷ 0.250 L = 0.2000 mol/L

The calculator shows 0.2000 mol/L (or 200.0 mM). This is a standard 0.2 M NaCl solution, often used in labs as a saline solution.

Assumptions

  • The solute is pure and completely dissolves (for NaCl, complete dissociation is assumed in concentration calculations).
  • The final volume is measured after dissolution, not the volume of solvent added before.
  • Temperature is 25 °C unless otherwise stated; molarity is temperature-dependent because volume changes with temperature.
  • For glucose, the molar mass is the same regardless of whether it is α-glucose or β-glucose.

What Does “Mass Number” Mean for Glucose?

In chemistry, “mass number” specifically refers to the total number of protons and neutrons in a single atom’s nucleus. Glucose is a molecule, not an atom, so it does not have a mass number in that strict sense. Instead, we use:

  • Molecular mass (in daltons or u): the sum of the atomic masses of all atoms in one molecule. For glucose, that is 180.156 u.
  • Molar mass (in g/mol): the mass of one mole (6.022 × 1023 molecules) of glucose. Numerically identical to molecular mass, but expressed in grams per mole.

If you hear someone say “the mass number of glucose is 180,” they are almost certainly referring to the molar mass, often rounded to 180 g/mol for quick calculations.

Why the Molar Mass Matters in the Lab

Knowing the molar mass of glucose is essential for preparing solutions of a specific concentration. For example, to make 1 liter of a 1 M glucose solution, you would weigh out 180.156 g of glucose and dissolve it in water to a final volume of 1 L. This is a common stock solution for cell culture media, fermentation studies, and biochemical assays.

In clinical chemistry, blood glucose is often reported in mg/dL or mmol/L. To convert between these, you need the molar mass: 1 mmol/L of glucose equals 18 mg/dL (since 180.156 mg per mmol, roughly). This conversion is used daily in hospitals to interpret glucometer readings.

Common Mistakes and Misconceptions

  • Confusing mass number with atomic number: Atomic number is the number of protons; mass number is protons + neutrons. Glucose has no single atomic number because it is a compound.
  • Using 180 instead of 180.156: For most lab work, rounding to 180 g/mol is acceptable, but for precise molarity calculations, use the full value.
  • Forgetting water of hydration: Glucose is often purchased as anhydrous, but some sugar derivatives (like glucose monohydrate) have a different molar mass. Always check the label.
  • Mixing up molarity and molality: Molarity is moles per liter of solution; molality is moles per kilogram of solvent. They are not the same.

How to Use the Calculator Above

This calculator computes the molarity of a solution when you know the mass of solute, its molar mass, and the final solution volume. Enter the mass in grams, the molar mass in g/mol (for glucose, use 180.156), and the volume in milliliters. The result is the molar concentration in mol/L (M) and also in millimolar (mM).

For example, to make 500 mL of a 0.5 M glucose solution:

  1. Moles needed = 0.5 mol/L × 0.500 L = 0.250 mol
  2. Mass needed = 0.250 mol × 180.156 g/mol = 45.039 g
  3. Weigh 45.039 g of glucose, dissolve in water, and bring the final volume to 500 mL.

Always add solute to a portion of solvent, dissolve completely, then adjust to the final volume. This ensures accuracy because the solute adds to the volume.

Limits of the Molar Mass Concept

The molar mass of glucose is an average value based on the natural isotopic abundance of carbon, hydrogen, and oxygen. In a specific sample, the actual mass may vary slightly due to isotopic composition, but the difference is negligible for virtually all practical purposes. For high-precision work (e.g., isotope ratio mass spectrometry), you would use the exact isotopic masses, but that is beyond standard lab calculations.

Also, the molar mass does not change with temperature or pressure. However, the molarity of a solution does change with temperature because the volume of the solution expands or contracts. If you need temperature-independent concentration, use molality or mole fraction.

Frequently Asked Questions

What is the mass number of a glucose molecule?

The mass of one glucose molecule is 180.156 atomic mass units (u). This is the sum of the atomic masses of 6 carbon, 12 hydrogen, and 6 oxygen atoms. In grams, one molecule weighs 180.156 / (6.022 × 1023) ≈ 2.99 × 10−22 g.

Is the molar mass of glucose 180 or 180.156?

Both are used. The exact molar mass is 180.156 g/mol based on IUPAC standard atomic weights. Many textbooks and quick calculations round to 180 g/mol. For precise lab work, use the full value; for rough estimates, 180 is fine.

How many grams of glucose are in 1 mole?

One mole of glucose contains 6.022 × 1023 molecules and weighs 180.156 grams. This is the molar mass expressed in grams per mole.

Why is glucose’s molar mass the same as fructose’s?

Glucose and fructose are isomers—they have the same molecular formula C6H12O6 but different structural arrangements. Since molar mass depends only on the number and type of atoms, not their arrangement, both have a molar mass of 180.156 g/mol.

How do I convert blood glucose from mg/dL to mmol/L?

Divide the value in mg/dL by 18.016 (which is 180.156 g/mol divided by 10). For example, 90 mg/dL ÷ 18.016 ≈ 5.0 mmol/L. This conversion is standard in clinical settings.

Does glucose have a mass number like an isotope?

No. Mass number is a term for atoms, specifically the count of protons plus neutrons. Glucose is a molecule made of many atoms, so it has a molecular mass, not a mass number. If you mean the mass number of a carbon atom in glucose, it is 12 for the most common isotope, but that is not the mass of the whole molecule.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →