molecalculator

Moles & Molar Mass

12.01 Molar Mass of Glucose: Facts Explained

Calculator No. 01-9816 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of glucose (C6H12O6) is 180.156 g/mol, not 12.01. The value 12.01 is the atomic mass of carbon (C) in g/mol, which is a single element in glucose, not the whole molecule. This article explains why 12.01 appears in glucose calculations, how to compute the full molar mass, and how to use it in lab work.

Formula

The molar mass (M) of a compound is the sum of the atomic masses of all atoms in its molecular formula, expressed in grams per mole (g/mol). For glucose, C6H12O6:

M = (6 × atomic mass of C) + (12 × atomic mass of H) + (6 × atomic mass of O)

  • Atomic mass of C = 12.011 g/mol (IUPAC abridged standard atomic weight)
  • Atomic mass of H = 1.008 g/mol
  • Atomic mass of O = 15.999 g/mol

Thus, M = (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol.

Worked Example

Using the calculator defaults: you have 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) and you dissolve it in water to make 250 mL of solution. What is the molarity?

  1. Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L
  2. Calculate moles of NaCl: 2.922 g ÷ 58.44 g/mol = 0.05000 mol
  3. Molarity = moles ÷ volume = 0.05000 mol ÷ 0.250 L = 0.2000 mol/L
  4. In millimolar: 0.2000 mol/L × 1000 = 200.0 mM

The calculator shows 0.2000 mol/L and 200.0 mM.

Assumptions

  • The solute is pure and non-reactive with the solvent.
  • The final volume is used, not the volume of solvent added (i.e., you add solute then fill to the mark).
  • The solution is dilute enough that molarity approximates molality.
  • Temperature is 25 °C unless otherwise stated; molarity changes slightly with temperature because volume changes.

Why 12.01 Appears in Glucose Context

When people search “12.01 molar mass of glucose,” they often confuse the atomic mass of carbon with the molar mass of glucose. The number 12.01 is the standard atomic weight of carbon (C), which is 12.011 g/mol. Glucose contains six carbon atoms, so the carbon contribution to the molar mass is 6 × 12.011 = 72.066 g/mol. The rest comes from hydrogen (12 × 1.008 = 12.096 g/mol) and oxygen (6 × 15.999 = 95.994 g/mol).

Another common mistake is using the rounded atomic mass of carbon (12.01) in calculations, which gives 180.12 g/mol instead of 180.156 g/mol. The difference is small (0.036 g/mol) but can matter in precise stoichiometry.

How to Calculate Molar Mass of Any Compound

To find the molar mass of a compound, follow these steps:

  1. Write the molecular formula (e.g., C6H12O6 for glucose).
  2. Look up the atomic mass of each element from the periodic table (use IUPAC standard atomic weights).
  3. Multiply each atomic mass by the number of atoms of that element in the formula.
  4. Sum all the products to get the molar mass in g/mol.

For example, for water (H2O): (2 × 1.008) + (1 × 15.999) = 18.015 g/mol.

Common Mistakes and How to Avoid Them

  • Using the wrong atomic mass: Always use the periodic table’s standard atomic weight (e.g., 12.011 for C, not 12.01 if you need high precision).
  • Forgetting to multiply by the subscript: Glucose has 6 oxygen atoms, not 1. Missing subscripts leads to huge errors.
  • Confusing molar mass with molecular weight: They are numerically the same but units differ: molar mass is g/mol, molecular weight is in daltons (Da) or amu. For glucose, 180.156 g/mol = 180.156 Da.
  • Rounding too early: Round only at the final step to avoid accumulated error.

Using Molar Mass in Lab Calculations

Molar mass is the bridge between mass and moles. To prepare a solution of known molarity, you use:

moles = mass (g) ÷ molar mass (g/mol)

Then, molarity (M) = moles ÷ volume (L). For example, to make 500 mL of 0.1 M glucose solution:

  • Moles needed = 0.1 mol/L × 0.5 L = 0.05 mol
  • Mass needed = 0.05 mol × 180.156 g/mol = 9.0078 g
  • Weigh 9.008 g of glucose, dissolve in water, and make up to 500 mL.

Always use the final volume, not the volume of solvent added. Dissolve the solute in a smaller amount of solvent, then add solvent to the mark.

Frequently Asked Questions

Is 12.01 the molar mass of glucose?

No. 12.01 g/mol is the atomic mass of carbon. The molar mass of glucose (C6H12O6) is 180.156 g/mol. The number 12.01 appears because carbon is one of the elements in glucose, but you must multiply it by 6 and add the contributions of hydrogen and oxygen.

What is the molar mass of glucose in g/mol?

It is 180.156 g/mol using IUPAC standard atomic weights. If you use rounded atomic masses (C=12, H=1, O=16), you get 180 g/mol, which is often used for rough calculations. The exact value depends on the isotopic composition, but 180.156 is the accepted standard.

How do I calculate the molar mass of glucose?

Multiply the atomic mass of each element by its subscript in the formula and sum: (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 180.156 g/mol. Write out the formula, look up atomic masses, multiply, and add.

What is the difference between molar mass and molecular weight?

They are numerically identical for a given molecule, but molar mass has units of g/mol and refers to one mole of substance, while molecular weight (molecular mass) is in daltons (Da) and refers to one molecule. For glucose, both are 180.156 (g/mol or Da).

Why do some sources say glucose molar mass is 180.16 while others say 180.156?

The difference comes from rounding. 180.16 is 180.156 rounded to two decimal places. Both are correct; the exact value depends on the precision of atomic weights used. For most lab work, 180.16 g/mol is sufficient.

Does glucose molar mass change in solution?

No, the molar mass is an intrinsic property of the molecule and does not change when dissolved. However, the molarity of a solution changes with temperature because volume changes. The mass of glucose you weigh remains the same.

Safety and Accuracy Notes

When preparing solutions, always use analytical balance for precise weighing and a volumetric flask for accurate final volume. Follow your lab’s safety data sheets (SDS) for glucose and any other chemicals. Glucose is generally safe, but avoid inhaling dust and wash hands after handling. For any lab procedure, follow your supervisor’s instructions and institutional guidelines.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →