One atomic mass unit (amu) is defined as exactly 1/12 the mass of a carbon-12 atom, which equals 1.66053906660 × 10−27 kg. In these units, a proton has a mass of 1.007276 amu, a neutron has a mass of 1.008665 amu, and an electron has a mass of 0.00054858 amu. These values are fundamental to chemistry and physics, explaining why the atomic mass of an element is so close to its mass number (the sum of protons and neutrons).
Formula
The conversion from kilograms to atomic mass units uses the definition of the amu:
1 amu = 1.66053906660 × 10−27 kg
So, mass in amu = mass in kg ÷ (1.66053906660 × 10−27 kg/amu)
- m = mass in kilograms (kg)
- amu = mass in atomic mass units (unitless, often written as u or Da)
The calculator above lets you enter any mass in kilograms and converts it to amu. It also returns the same value in unified atomic mass units (u) and kilograms for clarity.
Worked Example
Let’s convert the mass of a proton from kilograms to amu, using the default value in the calculator.
- Mass of proton (kg): 1.67262192369 × 10−27 kg
- Divide by the amu definition: 1.67262192369 × 10−27 ÷ (1.66053906660 × 10−27)
- Result: 1.007276466621 amu
Rounded to 6 decimal places, the calculator shows 1.007276 amu. This matches the accepted value.
Assumptions
- The amu is based on the carbon-12 standard, where 1 amu = 1/12 the mass of a neutral carbon-12 atom.
- The masses used are for the particles at rest (no kinetic energy contribution).
- The electron mass is the rest mass; in atoms, the electron’s binding energy slightly reduces the total atomic mass.
Why the Values Matter
The masses of protons, neutrons, and electrons in amu are the building blocks of atomic weights. When you look at a periodic table, the atomic weight of an element (e.g., carbon = 12.011) is a weighted average of its isotopes’ masses. Each isotope’s mass is essentially the sum of its protons and neutrons (in amu) minus a tiny mass defect due to nuclear binding energy. The electron mass is so small (about 1/1836 of a proton) that it barely affects the total, which is why atomic weights are so close to whole numbers.
For example, carbon-12 has 6 protons and 6 neutrons. Adding their masses: 6×1.007276 + 6×1.008665 = 12.095646 amu. But the actual mass of a carbon-12 atom is exactly 12 amu by definition. The difference (0.095646 amu) is the mass defect, converted to binding energy (E=mc²). This energy holds the nucleus together.
Common Misconceptions
“Proton and neutron have the same mass.” They are close but not equal. The neutron is about 0.1% heavier than the proton. That difference matters in nuclear physics: a free neutron decays into a proton, an electron, and an antineutrino, releasing energy because the neutron is slightly more massive.
“Electron mass is negligible.” In atomic mass calculations, yes, but in precise mass spectrometry, the electron mass is significant. For example, the mass of a proton is measured using a Penning trap, and the electron mass is known to 10 significant figures.
How to Use This Calculator
This calculator is for converting any mass in kilograms to atomic mass units. It’s useful when you have a mass from a physics experiment (in kg) and need to express it in amu for chemistry or nuclear physics. You can also enter a mass in grams (just divide by 1000 first) or use the output to compare particles.
For example, if you have a molecule with a mass of 2.99 × 10−26 kg, enter that value and you’ll get approximately 18.0 amu, which corresponds to water (H₂O). This is how mass spectrometers report molecular masses.
Limitations
The calculator uses the exact definition of the amu. However, be aware that in biochemistry, the “dalton” (Da) is often used interchangeably with amu, but the dalton is defined as 1/12 of the mass of a carbon-12 atom, exactly the same as amu. Some older literature used the “atomic mass unit” based on oxygen-16, which is slightly different (1.66053892 × 10−27 kg). The current standard is the unified atomic mass unit (u) based on carbon-12, which is what this calculator uses.
Also note that the masses of individual particles are not exactly integers in amu because of binding energy and the fact that the amu is defined relative to a carbon atom, not a proton.
Frequently Asked Questions
Q: What is the mass of a proton in amu?
A: The mass of a proton is 1.007276 amu. In kilograms, it is 1.67262192369 × 10−27 kg. This is slightly less than 1 amu because the amu is defined as 1/12 of a carbon-12 atom, which includes the mass of 6 protons, 6 neutrons, and 6 electrons, minus binding energy.
Q: Why is the neutron mass not exactly 1 amu?
A: The neutron has a mass of 1.008665 amu, which is slightly more than 1 amu. The amu is defined as 1/12 of a carbon-12 atom, not as the mass of a single nucleon. The carbon-12 atom has 6 protons and 6 neutrons, and the binding energy reduces the total mass, so each nucleon’s average mass in the atom is slightly less than a free neutron’s mass.
Q: How many electrons make up 1 amu?
A: Since 1 electron = 0.00054858 amu, you would need approximately 1 ÷ 0.00054858 ≈ 1822.9 electrons to equal 1 amu. This shows how tiny the electron’s mass is compared to protons and neutrons.
Q: Is the mass of an electron exactly 0.00054858 amu?
A: That is the accepted value to six significant figures. The more precise value is 0.000548579909070 amu. It is not exactly 1/1836, but that fraction is a common approximation.
Q: Why do we use amu instead of kilograms in chemistry?
A: Because atomic masses in kilograms are incredibly small (10−27 kg), which is unwieldy. The amu scale makes atomic weights easy to compare: a hydrogen atom is about 1 amu, carbon is 12, oxygen is 16, etc. This also directly relates to molar mass: 1 mole of a substance has a mass in grams equal to its atomic weight in amu.
Q: What is the mass defect and how does it relate to amu?
A: The mass defect is the difference between the sum of the masses of individual protons and neutrons and the actual mass of the nucleus. For carbon-12, the sum is 12.095646 amu, but the atom weighs exactly 12 amu. The missing mass (0.095646 amu) is converted to binding energy, which holds the nucleus together. This is calculated using E=mc².
Practical Context
In mass spectrometry, the mass-to-charge ratio (m/z) is measured in amu (or daltons). Knowing the exact masses of protons, neutrons, and electrons helps interpret spectra. For example, the difference between a protonated molecule (M+H)+ and the neutral molecule is the mass of a proton (1.007276 amu). This is why the m/z of [M+H]+ is the molecular mass plus 1.00728, not plus 1.
In nuclear reactions, the mass defect is used to calculate energy release. The classic example is the fusion of hydrogen to helium: four protons (4 × 1.007276 = 4.029104 amu) combine to form helium-4 (4.002602 amu) plus two positrons and neutrinos. The mass difference (0.0265 amu) is converted to energy, which is why the Sun shines.
Conclusion
The masses of protons, neutrons, and electrons in amu are not just numbers; they are the foundation of atomic weights, nuclear energy, and mass spectrometry. By understanding that 1 amu is 1/12 of a carbon-12 atom, you can appreciate why the periodic table works the way it does. Use the calculator above to convert any mass in kilograms to amu, and remember the key values: proton = 1.007276 amu, neutron = 1.008665 amu, electron = 0.00054858 amu.
Related
Formula used
in m | Mass in kg | kg | 1.67262192369e-27 | 0 out amu | Mass in atomic mass units | amu | m / 1.66053906660e-27 | 6 out u | Mass in unified atomic mass units | u | amu | 6 out kg | Mass in kilograms | kg | m | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check