One mole of glucose (C6H12O6) has a mass of 180.156 grams. To find the mass of any other amount, multiply the number of moles by 180.156 g/mol, or use the calculator below to convert from moles, molarity, or solution volume.
Formula
The calculator above converts between mass of solute, molar mass, and solution volume to give molarity. The core formula is:
Molarity (mol/L) = (mass of solute in grams ÷ molar mass in g/mol) ÷ (volume in mL ÷ 1000)
Symbolically:
c = m / (M × V)
where:
- m = mass of solute in grams (g)
- M = molar mass of the solute in grams per mole (g/mol)
- V = final solution volume in liters (L) — the calculator takes mL and divides by 1000
- c = molarity in moles per liter (mol/L, often written M)
For glucose specifically, the molar mass is 180.156 g/mol. This comes from the atomic weights: carbon (C) 12.011 × 6 = 72.066, hydrogen (H) 1.008 × 12 = 12.096, and oxygen (O) 15.999 × 6 = 95.994. Sum: 72.066 + 12.096 + 95.994 = 180.156 g/mol.
Worked Example
Let’s use the calculator’s default values: you want to make 250 mL of a solution with 2.922 g of a solute that has a molar mass of 58.44 g/mol (that’s sodium chloride, NaCl). What is the molarity?
- Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
- Calculate moles of solute: 2.922 g ÷ 58.44 g/mol = 0.05000 mol (exactly 0.05 mol)
- Divide moles by volume: 0.05000 mol ÷ 0.250 L = 0.2000 mol/L
The calculator shows 0.2000 mol/L (or 0.2000 M), and the millimolar concentration is 200.00 mM. For glucose, if you used 2.922 g of glucose (molar mass 180.156 g/mol) in 250 mL, the molarity would be:
Moles = 2.922 g ÷ 180.156 g/mol = 0.01622 mol
Molarity = 0.01622 mol ÷ 0.250 L = 0.06488 mol/L, or about 64.88 mM.
Assumptions
- The solution is at room temperature (≈25 °C) and dilute, so density changes are negligible.
- You are measuring the final volume after adding solute and solvent, not the volume of solvent alone.
- The solute is pure and anhydrous (no water of hydration).
- For glucose, the molar mass assumes the common D-glucose form, C6H12O6.
Why Glucose’s Molar Mass Matters
Glucose is a monosaccharide with the empirical formula CH2O and the molecular formula C6H12O6. Its molar mass of 180.156 g/mol is one of the most frequently used constants in biochemistry and clinical chemistry. For example, normal human blood glucose is about 70–100 mg/dL (fasting). To convert that to millimolar:
100 mg/dL = 1.00 g/L. Moles per liter = 1.00 g ÷ 180.156 g/mol = 0.005551 mol/L = 5.551 mmol/L. That’s why a blood glucose of 100 mg/dL is often reported as 5.5 mM.
In the lab, you might need to prepare a 1 M glucose solution. That requires 180.156 g of glucose dissolved in enough water to make exactly 1 liter of solution. If you instead dissolve it in 1 liter of water, the final volume will be slightly more than 1 L, and the concentration will be a bit less than 1 M. Always use a volumetric flask and add solvent to the mark.
How to Use the Calculator for Glucose
The calculator above is generic – it works for any solute. To use it for glucose:
- Enter the mass of glucose you have (in grams) in the first field.
- Enter the molar mass of glucose: 180.156 g/mol (you can change the default 58.44).
- Enter the final volume of solution in mL.
- Read the molarity (mol/L) and millimolar concentration.
Alternatively, if you know the desired molarity and volume, you can work backwards to find the mass needed. For example, to make 500 mL of 0.5 M glucose:
Moles needed = 0.5 mol/L × 0.500 L = 0.25 mol
Mass needed = 0.25 mol × 180.156 g/mol = 45.039 g
So you would weigh out 45.04 g of glucose and dissolve in water to a final volume of 500 mL.
Common Mistakes and How to Avoid Them
- Using the wrong molar mass: Glucose monohydrate (C6H12O6·H2O) has a molar mass of 198.17 g/mol. Check the label – many lab reagents are the monohydrate.
- Confusing mg and g: Always convert milligrams to grams (divide by 1000) before dividing by molar mass.
- Volume vs. solvent: “Add to 1 L” means the final volume is 1 L, not “add 1 L of water.” The difference is small for dilute solutions but matters for accurate work.
- Rounding too early: Use at least 4 significant figures in intermediate steps. Rounding 180.156 to 180 changes the result by about 0.1%.
- Forgetting the exponent in scientific notation: When using very small masses (e.g., 0.002 g), write it as 2×10−3 g to avoid losing zeros.
Alternatives: Using Density or Percent Solutions
Sometimes you don’t need molarity but a mass percentage or a weight/volume percentage. For a 5% (w/v) glucose solution, you would dissolve 5 g of glucose in water and bring the total volume to 100 mL. This is not the same as 5% (w/w), which is 5 g glucose per 100 g of solution.
If you have a glucose solution with a known density, you can convert between mass and volume. For example, a 50% (w/w) glucose solution has a density of about 1.23 g/mL at 20 °C. That means 100 g of solution occupies 100 g ÷ 1.23 g/mL ≈ 81.3 mL. But for most lab calculations, molarity is preferred because it relates directly to moles and stoichiometry.
Another alternative is to use a glucose standard curve (e.g., from a spectrophotometric assay) to find unknown concentrations. That method requires a calibration curve and is not a simple mass calculation.
Limits of This Calculation
The formula assumes ideal behavior – that the solute dissolves completely and the volume change upon mixing is negligible. For glucose, this is a good approximation for concentrations up to about 1 M. At very high concentrations (e.g., >2 M), the solution’s density and volume change noticeably, and molarity will not be exactly proportional to mass.
Temperature also affects volume. Solutions are typically prepared at room temperature; if you use a volumetric flask calibrated at 20 °C but work at 30 °C, the volume will be slightly larger, lowering the molarity. For most teaching and routine lab work, this is ignored.
Finally, the calculator gives the mass of the pure solute. If your glucose is hydrated or contains impurities, adjust the mass accordingly. Always follow your lab method, the safety data sheet (SDS), and your supervisor for specific procedures.
Frequently Asked Questions
How many grams are in one mole of glucose?
One mole of glucose (C6H12O6) weighs exactly 180.156 grams. This is the sum of the atomic weights: 6 carbons (72.066 g), 12 hydrogens (12.096 g), and 6 oxygens (95.994 g).
How do I convert mg/dL glucose to mmol/L?
Divide the mg/dL value by 18.0. This is because 1 mmol/L of glucose equals 18 mg/dL. For example, 90 mg/dL ÷ 18 = 5.0 mmol/L. The factor comes from the molar mass: 180.156 g/mol ÷ 10 = 18.0156.
What is the mass of 0.5 moles of glucose?
Multiply 0.5 mol by 180.156 g/mol to get 90.078 grams. So 0.5 moles of glucose is about 90.1 grams.
Why is the molar mass of glucose sometimes given as 180.16 and sometimes 180.156?
Both are correct; 180.16 is a rounded version of 180.156. The IUPAC standard atomic weights give 180.156 g/mol, but many textbooks round to 180.16 or even 180. For most calculations, 180.16 is precise enough (error < 0.002%).
How many glucose molecules are in 1 gram?
Divide 1 g by 180.156 g/mol to get 0.005551 moles. Multiply by Avogadro’s number (6.022 × 1023 molecules/mol) to get approximately 3.34 × 1021 molecules.
Does glucose have the same molar mass as fructose?
Yes, fructose also has the molecular formula C6H12O6, so its molar mass is also 180.156 g/mol. They are structural isomers, so the mass is identical, though their chemical properties differ.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED