molecalculator

Moles & Molar Mass

Mass of Glucose Molecule: Exact Answer & Molar Mass

Calculator No. 01-9878 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The mass of a single glucose molecule (C6H12O6) is approximately 2.99 × 10−23 grams (or 2.99 × 10−26 kg). This is the absolute mass of one molecule; in chemistry, you more often work with the molar mass, which is 180.156 g/mol for one mole (6.022 × 1023 molecules) of glucose.

Formula

To find the mass of a single molecule, you divide the molar mass by Avogadro’s number:

Mass of one molecule (g) = Molar mass (g/mol) ÷ 6.02214076 × 1023 molecules/mol

For glucose, the molecular formula is C6H12O6. Using IUPAC standard atomic weights:

  • Carbon (C): 12.011 g/mol × 6 = 72.066 g/mol
  • Hydrogen (H): 1.008 g/mol × 12 = 12.096 g/mol
  • Oxygen (O): 15.999 g/mol × 6 = 95.994 g/mol

Sum = 72.066 + 12.096 + 95.994 = 180.156 g/mol

Then divide by Avogadro’s number: 180.156 ÷ (6.02214076 × 1023) = 2.9915 × 10−23 g.

Worked Example

Let’s calculate the mass of one glucose molecule step by step using the default values from the calculator above (which are for a different compound – sodium chloride – but the method is identical). For glucose:

  1. Write the formula: C6H12O6
  2. Find each element’s atomic weight (g/mol): C = 12.011, H = 1.008, O = 15.999
  3. Multiply by the number of atoms: 6×12.011 = 72.066; 12×1.008 = 12.096; 6×15.999 = 95.994
  4. Add them: 72.066 + 12.096 + 95.994 = 180.156 g/mol
  5. Divide by Avogadro’s number: 180.156 / 6.02214076×1023 = 2.9915×10−23 g

So the mass of one glucose molecule is 2.99 × 10−23 g, which is also 2.99 × 10−26 kg.

Assumptions

  • The molecule is in its neutral, non-ionized form (glucose has no charge).
  • Atomic weights are the IUPAC standard terrestrial values; actual isotopic composition can vary slightly.
  • Avogadro’s number is exactly 6.02214076 × 1023 per mole (SI definition).
  • You are calculating the mass of a single, isolated molecule, not a crystal or solution.

Why the Molar Mass Matters More Than Single-Molecule Mass

In a lab, you never weigh out one molecule – you weigh grams of glucose. The molar mass (180.156 g/mol) tells you that one mole of glucose (6.022 × 1023 molecules) weighs 180.156 grams. This is the number you use to prepare solutions, calculate yields, or convert between mass and moles. For example, to make 1 liter of a 1 M glucose solution, you would dissolve 180.156 g of glucose in water and bring the total volume to 1 L. The single-molecule mass is mostly useful in theoretical physics or advanced chemistry, but the molar mass is the everyday workhorse.

Common Mistakes and Misconceptions

  • Confusing molar mass with molecular mass: Molar mass is in g/mol (macroscopic), molecular mass is in atomic mass units (u) – numerically the same for glucose (180.156 u) but different units.
  • Using 180 instead of 180.156: For most lab work, 180 g/mol is a fine approximation, but for precise calculations, use the exact value.
  • Forgetting to multiply by the number of atoms: A common error is to add atomic weights without multiplying by subscripts. C6H12O6 has 24 atoms total, not 3.
  • Rounding too early: If you round atomic weights to whole numbers (C=12, H=1, O=16), you get 180 g/mol, which is fine for rough work but off by 0.156 g/mol.

How to Use This in Real Lab Work

When you need to prepare a glucose solution, you use the molar mass to convert grams to moles. For example, to make 500 mL of a 0.5 M glucose solution:

  1. Calculate moles needed: 0.5 mol/L × 0.5 L = 0.25 mol
  2. Convert to grams: 0.25 mol × 180.156 g/mol = 45.039 g
  3. Weigh out 45.039 g of glucose, dissolve in about 400 mL water, then add water to reach exactly 500 mL.

Always use a volumetric flask for the final volume – never add solvent to a beaker and guess. The calculator above helps with the general molarity arithmetic: enter your mass, molar mass, and volume to get concentration. For glucose, you would enter 180.156 as the molar mass.

Limits of the Single-Molecule Mass

The value 2.99 × 10−23 g is the average mass of a glucose molecule. Individual molecules may differ slightly because carbon, hydrogen, and oxygen have natural isotopes. For instance, a molecule containing a 13C atom instead of 12C would be about 1 u heavier. In a typical sample, about 1.1% of carbon atoms are 13C, so roughly 6% of glucose molecules (those with one 13C) have a mass of about 181.16 u instead of 180.16 u. This variation is negligible for most calculations but matters in mass spectrometry.

Frequently Asked Questions

What is the mass of one glucose molecule in daltons?
One glucose molecule has a molecular mass of 180.156 daltons (or atomic mass units, u). This is the same number as the molar mass in g/mol, because 1 u is defined as 1/12 the mass of a carbon-12 atom, and Avogadro’s number links grams to daltons.

How many glucose molecules are in 1 gram?
Divide 1 g by the mass of one molecule: 1 / (2.99 × 10−23) ≈ 3.34 × 1022 molecules. Alternatively, divide 1 g by the molar mass (180.156 g/mol) to get 0.00555 mol, then multiply by Avogadro’s number.

Is the mass of glucose the same as the mass of fructose?
Yes – glucose and fructose have the same molecular formula C6H12O6, so they have the same molar mass (180.156 g/mol) and same single-molecule mass. They are isomers with different structures.

Why is glucose’s molar mass sometimes given as 180.16 and sometimes 180.156?
The difference is rounding. The IUPAC standard atomic weights give 180.156 g/mol when using full precision (C=12.011, H=1.008, O=15.999). Many textbooks round to 180.16 or even 180 for simplicity. For precise stoichiometry, use 180.156.

How does the mass of a glucose molecule compare to a water molecule?
Water (H2O) has a molar mass of 18.015 g/mol, so one water molecule weighs about 2.99 × 10−23 g – exactly 10 times less than glucose. Glucose is a larger molecule with 24 atoms, while water has only 3.

Can I use the calculator on this page for glucose?
Yes – the calculator computes molarity from mass, molar mass, and volume. For glucose, enter 180.156 as the molar mass, your desired mass in grams, and your final volume in mL. The calculator will give you the concentration in mol/L and mmol/L.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →