Sodium hydrogen carbonate, also called sodium bicarbonate or baking soda, has a molar mass of 84.0066 g/mol. Enter a sample’s mass and the amount you want to calculate to convert between mass and moles; the calculator below returns the sample mass in grams.
Formula
Mass is the amount of substance multiplied by its molar mass: m = n × M. Here, m is mass in grams (g), n is amount in moles (mol), and M is molar mass in grams per mole (g/mol). The displayed calculator uses 84.006 g/mol, calculated from the specified abridged standard atomic weights: Na = 22.990, H = 1.008, C = 12.011, and O = 15.999.
The formula is dimensionally consistent: multiplying mol by g/mol leaves g. To find moles from a measured mass instead, rearrange it to n = m ÷ M. The calculator’s input is the amount in moles, so its first output is the corresponding mass.
Worked Example
Using the default amount, n = 0.1 mol:
- Calculate the molar mass from the formula NaHCO3: 22.990 + 1.008 + 12.011 + (3 × 15.999) = 84.006 g/mol.
- Multiply amount by molar mass: m = 0.1 mol × 84.006 g/mol = 8.4006 g.
- Rounded to the calculator’s two decimal places, the mass is 8.40 g.
Assumptions
- The formula represents pure sodium hydrogen carbonate, NaHCO3, with a formula-unit composition of one sodium, one hydrogen, one carbon, and three oxygen atoms.
- The input is an amount of substance, not a solution concentration or a volume.
- The result is a calculated chemical mass; it does not account for moisture, impurities, or uncertainty in a physical weighing.
Why the Molar Mass Is 84.006 g/mol
A substance’s molar mass is the mass of one mole of its specified chemical entities. For an ionic compound such as sodium hydrogen carbonate, those entities are formula units: the smallest whole-number ratio that represents the compound. One formula unit has the composition NaHCO3.
Its molar mass is the sum of the atomic weights in that formula. There is one Na, one H, one C, and three O atoms. Oxygen contributes 3 × 15.999 = 47.997 g/mol; adding the other contributions gives 22.990 + 1.008 + 12.011 + 47.997 = 84.006 g/mol. This is the value used by the calculator, based on the specified rounded atomic weights.
You may encounter 84.01 g/mol in reference tables. That is the same molar mass rounded to two decimal places, not a different compound. A small difference in the final reported digits can result from using atomic weights with a different number of digits or from rounding at different stages.
Using the Calculator and Choosing a Measurement
Use the calculator when the amount is already known in moles and you need the equivalent mass. For example, 0.1 mol corresponds to 8.40 g using the calculator’s molar mass. For the reverse conversion, divide a weighed mass in grams by 84.006 g/mol. A 5.00 g sample, for instance, is 5.00 ÷ 84.006 = approximately 0.05952 mol.
Keep the input unit consistent with the formula. If a quantity is supplied in millimoles, convert it to moles first: 1 mmol = 0.001 mol. Thus, 25 mmol is 0.025 mol, which corresponds to 0.025 × 84.006 = 2.10015 g, or about 2.10 g. Likewise, convert milligrams to grams before using the reverse calculation: 1,000 mg = 1 g.
- Known moles, seeking mass: multiply mol by 84.006 g/mol.
- Known mass, seeking moles: divide grams by 84.006 g/mol.
- Known amount in mmol: divide by 1,000 to obtain mol before multiplying.
For a physical sample, use a balance and report a precision that reflects the weighing and the purity of the material. A calculation can display several decimal places, but those digits do not make an imprecise measurement more accurate. For study or bench calculations, follow your lab method, the safety data sheet (SDS) and your supervisor.
Mass, Molar Mass, and Sample Purity
“Mass” and “molar mass” are related but different quantities. Mass describes how much material is in a particular sample and is commonly reported in grams. Molar mass is a property calculated from the chemical formula and is reported in grams per mole. The calculator’s first output is sample mass; its second output is the molar mass used in the calculation.
The result applies to pure NaHCO3. A commercial or laboratory sample may contain water or other substances, so its total weighed mass may not all be sodium hydrogen carbonate. If the material’s mass fraction of NaHCO3 is known as a decimal, the pure compound mass is the total mass multiplied by that fraction. For example, a 10.0 g sample that is 98% NaHCO3 contains 9.80 g of the compound. Do not assume a purity value unless it is specified for the material.
Common Misunderstandings and Limits
Sodium hydrogen carbonate is also called sodium bicarbonate; these are two names for the same formula, NaHCO3. It is not sodium carbonate, Na2CO3, which has a different formula and molar mass. The hydrogen in the formula matters: removing it changes the substance and invalidates the 84.006 g/mol value.
Another common confusion is treating molar mass as the mass of any sample. A mole is a fixed amount of entities, but a sample can contain any amount. One mole of NaHCO3 has a mass of 84.006 g; 0.1 mol has one tenth of that mass. The formula does not by itself provide the volume of a sample, a solution’s concentration, or a measure of purity. Those require additional information, such as density, solution volume, or a measured assay.
Frequently Asked Questions
What is the molar mass of sodium hydrogen carbonate?
It is 84.006 g/mol using Na = 22.990, H = 1.008, C = 12.011, and O = 15.999. It is commonly rounded to 84.01 g/mol.
How many grams are in one mole of sodium hydrogen carbonate?
One mole has a mass of 84.006 g, or approximately 84.01 g when rounded to two decimal places.
How do I convert grams of sodium bicarbonate to moles?
Divide the mass in grams by 84.006 g/mol. For example, 5.00 g ÷ 84.006 g/mol is about 0.05952 mol.
Is sodium bicarbonate the same as sodium hydrogen carbonate?
Yes. Both names refer to NaHCO3, whose molar mass is 84.006 g/mol using the atomic weights stated here.
Is sodium hydrogen carbonate the same as sodium carbonate?
No. Sodium hydrogen carbonate is NaHCO3; sodium carbonate is Na2CO3. Their formulas and molar masses differ.
Why do some sources say 84.01 g/mol?
84.01 g/mol is 84.006 g/mol rounded to two decimal places. The difference is ordinary rounding, not a different substance.
Related
Formula used
in n | Amount of sodium hydrogen carbonate | mol | 0.1 | 0 out m | Mass of sodium hydrogen carbonate | g | n * 84.006 | 2 out mm | Molar mass | g/mol | 84.006 | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Cubic Meters per Second to Litres per Second1,000.000 L/s
- Cubic Meters to Liters per Second Calculator10.00 L/s
- Cubic Meters to Liters: Symbol and Conversion1,000 L
- Cubic Meters per Liter: Conversion and Calculator0.001000 m³
- Cubic Meters to Liters Formula and Calculator1,000 L
- Cubic Meter to Megaliter Converter and Formula1.000 ML