molecalculator

Moles & Molar Mass

Melting Point of Ice in Kelvin: 273.15 K

Calculator No. 01-3499 · Updated · Formula and assumptions shown below

Temperature in kelvin 273.15 K
Temperature in Celsius
0 °C
Set in the form below
You enter
Temperature in Celsius (°C)
You get
Temperature in kelvin (K)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The melting point of ice is 273.15 kelvin (K) at standard atmospheric pressure, equivalent to 0 °C or 32 °F. This calculator converts a temperature in degrees Celsius to kelvin, so you can enter a value and get its absolute-temperature equivalent.

Formula

To convert Celsius to kelvin, add 273.15: T(K) = t(°C) + 273.15. Here, T is the temperature in kelvin and t is the temperature in degrees Celsius. The offset is exact by definition. The calculator accepts temperatures from −273.15 °C upward; that lower limit is absolute zero, or 0 K. It does not impose an upper limit.

Worked Example

Using the default input, the melting point of ice at standard atmospheric pressure:

  1. Enter t = 0 °C.
  2. Apply the conversion: T = 0 °C + 273.15 = 273.15 K.
  3. The calculator displays the result to two decimal places: 273.15 K.

Assumptions

  • The entered value is a Celsius temperature, not a temperature difference.
  • The ice point refers to pure water at approximately standard atmospheric pressure, 1 atm (101.325 kPa).
  • The conversion is a unit conversion; it does not calculate a phase change or predict how a particular sample behaves.

Why Ice Melts at 273.15 K

At the melting point, solid ice and liquid water can coexist in equilibrium. At a given pressure, the melting temperature is the point at which the solid and liquid phases have the same chemical potential: neither phase has a thermodynamic advantage over the other. Heat added at this temperature can melt ice without raising the temperature of the ice-water mixture, provided the pressure remains steady and the phases remain in equilibrium.

The familiar value is tied to pressure. The normal melting point of ice is approximately 273.15 K at one standard atmosphere. For especially precise work, the pressure and the definition of the relevant water phase matter. The triple point of water—the condition where ice, liquid water, and water vapor coexist—is at about 273.16 K and a pressure of about 611.657 pascals. That is not the ordinary atmospheric melting point: the pressure is far lower.

Also, the triple point is no longer the definition of the kelvin. Since the 2019 SI revision, the kelvin is defined by fixing the numerical value of the Boltzmann constant. The triple-point temperature remains a useful physical reference, but it does not define the unit.

Kelvin, Celsius, and Temperature Differences

The kelvin and Celsius scales have equal-sized increments. A change of 1 K is the same size as a change of 1 °C; their zero points differ by exactly 273.15. Thus, 10 °C is 283.15 K, and a temperature increase of 10 °C is also an increase of 10 K.

For absolute temperatures, write kelvin without a degree symbol: 273.15 K, not 273.15 °K. Celsius uses the degree symbol: 0 °C. This distinction is useful in science and engineering, where equations involving absolute temperature—such as the ideal gas law—require kelvins. Temperature differences can be expressed in kelvins or degrees Celsius because the step size is identical.

A frequent mistake is to convert a difference as if it were an absolute reading. For example, if a sample warms from 0 °C to 10 °C, its temperature changes by 10 K, not by 283.15 K. Add 273.15 only when converting an absolute Celsius temperature to kelvin.

Why the Melting Point Can Shift

The 273.15 K value is a useful standard reference, not a universal melting temperature for every ice sample in every situation. Pressure changes the balance between solid and liquid water. Near ordinary atmospheric pressure, increasing pressure slightly lowers the melting point of ice Ih, the familiar crystalline form. The effect is small in everyday conditions, but it matters in high-precision measurements and at extreme pressures, where other ice structures can occur.

Dissolved substances can also lower the freezing point of water, which is the same equilibrium temperature described from the liquid-to-solid direction. This is why salty water can remain liquid below 0 °C. The amount of change depends on the solute, its concentration, and solution behavior; it is not a correction that can be applied without knowing those details. Surface effects, impurities, and how quickly a sample is cooled can further affect observed freezing or melting behavior.

Melting and freezing temperatures are equilibrium concepts. A small sample may appear to melt over a range if it contains impurities or has temperature gradients. Supercooling is a related but different phenomenon: liquid water can temporarily remain liquid below its usual freezing point before ice forms. It does not mean the equilibrium melting point has changed.

How to Use the Conversion

Enter a Celsius temperature to obtain the corresponding kelvin value. To check the ice point, enter 0; for a colder example, −10 °C converts to 263.15 K. The calculator rejects values below −273.15 °C because they would correspond to negative kelvin temperatures under this conversion. In ordinary contexts, the result is an absolute temperature, not a statement that the material is liquid, solid, or actively melting.

Keep enough decimal places for the purpose. For everyday explanations, 273.15 K is clear and appropriately precise as the standard reference. Instrument uncertainty may be much larger or smaller depending on the experiment, so extra digits in a converted value do not make the original measurement more accurate. If a measured temperature is 0.2 °C with an uncertainty of ±0.1 °C, its kelvin value is 273.35 K with the same ±0.1 K uncertainty.

Frequently Asked Questions

What is the melting point of ice in kelvin?
At standard atmospheric pressure, the melting point of ice is approximately 273.15 K, equivalent to 0 °C.

Is the melting point of ice exactly 273 K?
273 K is a rounded value. The commonly quoted standard-pressure value is 273.15 K.

Why is the triple point of water 273.16 K?
The triple point occurs at a particular low pressure, where ice, liquid water, and vapor coexist. It is a different condition from ice melting at ordinary atmospheric pressure.

Does salt change the melting point of ice?
Salt dissolved in water lowers the solution’s freezing point. The exact shift depends on concentration and other solution properties; it does not change the Celsius-to-kelvin conversion.

How do I convert 0 °C to kelvin?
Add 273.15: 0 + 273.15 = 273.15 K. Do not add a degree symbol before K.

Related

Formula used
in tc | Temperature in Celsius | °C | 0 | -273.15
out tk | Temperature in kelvin | K | tc + 273.15 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →