molecalculator

Moles & Molar Mass

Rhenium (Re) Melting Point and Calculator

Calculator No. 01-3501 · Updated · Formula and assumptions shown below

Temperature in Celsius 3,186 °C
Temperature in Fahrenheit
5,767 °F
= Temperature × 9 ÷ 5 + 32
Temperature in kelvin
3,459 K
= Temperature + 273.15
Input temperature scale
Celsius
Set in the form below
You enter
Input temperature scale, Temperature (°C, °F, or K)
You get
Temperature in Celsius (°C), Temperature in Fahrenheit (°F), Temperature in kelvin (K)
Rounding
0 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Rhenium (Re) melts at approximately 3,186 °C, or 3,459 K (5,767 °F), at standard atmospheric pressure. This calculator converts a temperature entered in degrees Celsius, Fahrenheit, or kelvin into the other two scales; it does not predict a different melting point for a sample.

Formula

The calculator converts a Celsius input using these relationships: Fahrenheit = Celsius × 9/5 + 32, and kelvin = Celsius + 273.15. If the selected input scale is Fahrenheit, the correct Celsius conversion is (Fahrenheit − 32) × 5/9; for kelvin it is kelvin − 273.15. The selector provides the scale label, while the temperature field is entered in the chosen scale.

Here, °C means degrees Celsius, °F degrees Fahrenheit, and K kelvin. The output expressions shown in the calculator block display the Celsius-input conversions. The conventional reference point for rhenium’s melting point is about 3,186 °C; the equivalent values are approximately 5,767 °F and 3,459 K. Celsius and Fahrenheit use degree increments; kelvin is an absolute temperature scale and is written without a degree sign.

Worked Example

For the default temperature, 3,186 °C:

  • Celsius: 3,186 °C.
  • Fahrenheit: 3,186 × 9 / 5 + 32 = 5,766.8 °F, which rounds to 5,767 °F.
  • Kelvin: 3,186 + 273.15 = 3,459.15 K, which rounds to 3,459 K.

The calculator’s displayed outputs use the selected input scale to determine which conversion applies. The values above show the conversions for the known rhenium melting point and are rounded to whole units for readability.

Assumptions

  • The stated melting point is an approximate reference value at standard atmospheric pressure.
  • Temperature-scale conversions are mathematical; they do not account for pressure, sample purity, or measurement uncertainty.
  • Because a selector cannot change the temperature field’s unit automatically in this text format, enter the number in the selected scale and apply the matching conversion described above.

What Is Rhenium?

Rhenium is a metallic chemical element with the symbol Re and atomic number 75. It belongs to the transition metals and is notable for its high density and very high melting point. It is a rare element in Earth’s crust and is generally recovered as a by-product of processing molybdenum ores rather than mined from deposits of native rhenium.

The element was identified in 1925 by Walter Noddack, Ida Tacke, and Otto Berg. Its name comes from Rhenus, the Latin name for the Rhine River. Rhenium’s high-temperature behavior is useful in demanding industrial applications, but the pure metal is not the only form used: rhenium is also alloyed with other metals to tailor properties such as strength and resistance to high-temperature deformation.

Why Is Its Melting Point So High?

In a metal, atoms are held together by metallic bonding: their valence electrons are shared across the solid rather than being confined to individual bonds between neighboring atoms. Breaking the ordered solid structure into a liquid requires enough thermal energy to overcome that cohesive structure. Rhenium’s metallic bonding and atomic structure contribute to its exceptionally high melting temperature.

Melting point is a phase-transition temperature, not a measure of how quickly an object heats up or how much heat it takes to melt. Those questions also depend on the mass, heat capacity, shape, heating rate, and surroundings of the sample. A small rhenium piece and a large block have the same equilibrium melting point under the same pressure, but they require different total amounts of energy to reach and complete melting.

How Rhenium Compares with Other Metals

Rhenium is among the highest-melting elements, but it is not the highest. Tungsten melts at about 3,422 °C, roughly 236 °C above rhenium. Tantalum melts at about 3,017 °C, while iron melts at about 1,538 °C. These comparisons are approximate reference values; published tables may differ slightly depending on the data source and stated conditions.

Numbers sometimes quoted for carbon can be confusing because carbon may sublime under ordinary pressure rather than forming a liquid at a simple, commonly stated melting point. Comparisons should therefore distinguish melting from sublimation and specify pressure. Rhenium’s quoted value is a melting point for the metal, not a temperature at which it boils or evaporates.

What the Melting Point Means in Practice

Rhenium’s high melting point makes it valuable in certain high-temperature alloys and components. For example, rhenium is added to some nickel-based superalloys used in turbine applications, where the alloy’s performance depends on its complete composition and microstructure, not just the melting point of pure rhenium. Rhenium-containing materials are also used in specialized electrical and thermocouple applications.

It is important not to infer that a rhenium alloy melts at 3,186 °C. Alloying usually changes melting behavior: a mixture may begin to melt at a lower temperature, melt over a range, or have a liquidus temperature different from that of each pure constituent. The relevant value for a specific component is the documented property of that alloy or material grade.

Likewise, a listed melting point is not a safe operating temperature. A material may lose strength, creep, oxidize, react, or fail well below the temperature at which it becomes fully liquid. Engineering design needs the properties and limits of the actual material in its working environment.

Pressure, Purity, and Measurement

A melting point is most directly defined for a pure substance at a specified pressure. Changing pressure can shift phase-transition temperatures, and impurities can alter or broaden melting behavior. The familiar 3,186 °C figure is a rounded reference value for rhenium near standard pressure, not a guarantee that every rhenium-containing sample begins to melt at exactly that temperature.

At thousands of degrees, measurement is technically demanding. Instruments must be suitable for the temperature range, and the measurement can be affected by calibration, sample condition, heat transfer, and the atmosphere around the sample. A tabulated value is therefore usually more useful for general reference than an assumption that a simple thermometer or ordinary furnace can verify it.

Frequently Asked Questions

What is the melting point of rhenium in Fahrenheit?
It is approximately 5,767 °F, equivalent to about 3,186 °C.

What is the melting point of rhenium in kelvin?
It is approximately 3,459 K. Kelvin is an absolute temperature scale, so its unit is written K, not °K.

Is rhenium the metal with the highest melting point?
No. Tungsten has a higher melting point, about 3,422 °C, compared with rhenium’s approximately 3,186 °C.

Does rhenium melt at exactly 3,186 °C?
That is a rounded reference value. The observed transition can depend on pressure, purity, sample composition, and measurement conditions.

Does rhenium’s melting point apply to rhenium alloys?
No. Alloy composition changes melting behavior, so a particular alloy may melt at a different temperature or across a temperature range. Use data for the actual alloy.

Related

Formula used
sel scale | Input temperature scale | Celsius=1, Fahrenheit=2, Kelvin=3
in temp | Temperature | °C, °F, or K | 3186 | -273.15
out c | Temperature in Celsius | °C | temp | 0
out f | Temperature in Fahrenheit | °F | temp * 9 / 5 + 32 | 0
out k | Temperature in kelvin | K | temp + 273.15 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →