For the chemical symbol W, the melting point is about 3,422 °C (6,192 °F, or 3,695 K) at standard atmospheric pressure. W is tungsten, a metallic element; this value is its approximate equilibrium melting temperature, not a temperature at which every tungsten object will suddenly melt regardless of its surroundings.
Calculator: Convert Tungsten’s Melting Point
This calculator converts tungsten’s melting point between Celsius, Fahrenheit, and kelvin. Enter a temperature in any one of the three scales; the other two values are calculated using the standard temperature-conversion equations.
Formula
The first calculator output is the Celsius-to-Fahrenheit conversion: °F = °C × 9/5 + 32. Here, °C is temperature in degrees Celsius and °F is temperature in degrees Fahrenheit. The second output is K = °C + 273.15, where K is absolute temperature in kelvin. The conversion uses the exact Celsius–kelvin offset of 273.15 and the exact Fahrenheit scale ratio of 9/5.
Worked Example
Using the default input, 3422 °C:
- Fahrenheit: 3422 × 9 ÷ 5 + 32 = 6191.6 °F, which rounds to 6192 °F.
- Kelvin: 3422 + 273.15 = 3695.15 K.
The familiar quoted values are therefore approximately 3,422 °C, 6,192 °F, and 3,695 K. The calculator rounds Fahrenheit to a whole degree and kelvin to two decimal places.
Assumptions
- The input is a temperature in degrees Celsius; the conversions do not depend on pressure or sample size.
- The melting-point figure is a commonly cited approximate value for tungsten near standard atmospheric pressure. The calculator converts the entered value; it does not calculate a pressure-dependent phase diagram.
- For real bench or furnace work, follow your lab method, the safety data sheet (SDS) and your supervisor.
Why Tungsten Has Such a High Melting Point
Tungsten is a transition metal with atomic number 74. Its symbol, W, comes from the older name wolfram, which remains in use in some languages and scientific contexts. Tungsten atoms are held together in a metallic crystal by strong bonding, and its electronic structure contributes to the high energy required to disrupt the solid lattice. The result is the highest melting point among the elements at ordinary pressure.
Melting is a phase change: solid tungsten and liquid tungsten can coexist at the melting temperature when pressure is fixed and the system is at equilibrium. Supplying heat at that point goes into changing the solid into liquid rather than simply raising the temperature of the material. In practice, temperature gradients, impurities, oxidation, and the way heat is supplied can complicate observation, so a quoted melting point is a reference property rather than a guaranteed reading for every sample.
What the Number Means in Practice
The melting point is useful for comparing refractory materials and considering applications exposed to extreme heat. Tungsten is used in specialized electrical contacts, heating elements, and components where high-temperature performance matters. Its high melting point does not mean it is invulnerable: strength, creep, oxidation, thermal shock, and chemical compatibility may set practical limits well below the temperature at which bulk metal melts.
Atmosphere is especially important. At high temperatures, tungsten can react with oxygen, so heating it in air can cause oxidation before it reaches its melting point. Industrial and research applications therefore choose an environment and material design suited to the intended conditions. A melting-point figure alone is not a safe operating-temperature specification.
- Melting point: the temperature at which solid and liquid phases are in equilibrium at a stated pressure.
- Working temperature: a design limit that depends on atmosphere, load, duration, purity, geometry, and acceptable degradation.
- Heating-device setting: a control reading that may differ from the actual temperature of the tungsten sample.
Common Confusions and Comparisons
“W” can mean different things in different contexts, including the watt, a unit of power. Here, “melting point of W” means the element with chemical symbol W: tungsten. A watt does not have a melting point because it measures power, not a material. If the question was about a different substance abbreviated W in a particular document, its full chemical name or formula is needed.
Tungsten’s melting point is often compared with those of other metals. It is far above iron’s melting point, about 1,538 °C, and copper’s, about 1,085 °C. Carbon is sometimes said to have a higher melting point, but at ordinary pressure it tends to sublime rather than form a stable liquid; its phase behavior makes a simple ranking misleading. Tungsten’s distinction is that it has the highest melting point among the elements under ordinary pressure in the usual tabulations.
Do not confuse melting point with boiling point. Melting changes a solid into a liquid; boiling changes a liquid into a gas. Tungsten’s boiling point is much higher, commonly listed near 5,555 °C, and it is a separate property.
Frequently Asked Questions
What is the melting point of tungsten in Fahrenheit?
It is about 6,192 °F, the Fahrenheit equivalent of approximately 3,422 °C.
What is tungsten’s melting point in kelvin?
It is approximately 3,695 K. Kelvin is an absolute temperature scale, so 0 K corresponds to absolute zero.
Is tungsten the element with the highest melting point?
Yes. At ordinary pressure, tungsten is generally listed as the element with the highest melting point, at about 3,422 °C.
Does tungsten melt at exactly 3,422 °C in every situation?
No single quoted value describes every pressure and sample condition. Pressure, purity, and measurement method can affect reported values, and the commonly cited number is approximate.
Can tungsten be heated to its melting point in air?
High-temperature tungsten can oxidize in air, so oxidation may become a problem before melting. A melting point is not an instruction or safe operating limit for heating a tungsten object.
Does W mean tungsten or watts?
In the periodic table, W is tungsten’s chemical symbol. In measurements, W also denotes watts, a unit of power; context determines which meaning applies.
Related
Formula used
in c | Temperature in Celsius | °C | 3422 | -273.15 out f | Temperature in Fahrenheit | °F | c * 9 / 5 + 32 | 0 out k | Temperature in kelvin | K | c + 273.15 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Isotope Percent Abundance Calculator and How to Use It75.91 %
- Percentage Abundance Calculator and How to Find It
- Isotope Fractional Abundance Calculator and Formula0.2409 fraction
- Percent Abundance Formula: Calculate Isotope Percentages25.00 %
- Isotope Percent Abundance Calculator and How to Use It50.00 %
- Isotope Percent Abundance Calculator and How-To Guide75.91 %