molecalculator

Moles & Molar Mass

Melting Temperature of Ice: 0°C at Standard Pressure

Calculator No. 01-3503 · Updated · Formula and assumptions shown below

Heat to warm ice to 0 °C and melt it 355,000.000 J
Heat to warm and melt the ice
355.000 kJ
= Heat to warm ice to 0 °C and melt it ÷ 1000
Mass of ice
1 kg
Set in the form below
Starting ice temperature
-10 °C
Set in the form below
You enter
Mass of ice (kg), Starting ice temperature (°C)
You get
Heat to warm ice to 0 °C and melt it (J), Heat to warm and melt the ice (kJ)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The melting temperature of ordinary ice is 0°C (32°F) at standard atmospheric pressure, about 101.325 kPa. This calculator estimates how much heat is needed to warm ice to its melting point and melt it, using the ice’s mass and starting temperature; it returns the required energy in joules.

Formula

The melting point is the temperature at which solid and liquid water can coexist in equilibrium. For pure water near standard atmospheric pressure, it is 0°C. The calculator uses a separate heat calculation: Q = m[cice(0 − Ti) + Lf].

  • Q is heat required, in joules (J).
  • m is ice mass, in kilograms (kg).
  • Ti is the starting temperature in degrees Celsius (°C), from −273.15°C up to 0°C.
  • cice is the approximate specific heat capacity of ice, 2,100 J/(kg·°C).
  • Lf is the approximate latent heat of fusion of ice, 334,000 J/kg.

The first term, m × 2,100 × (0 − Ti), warms the ice to 0°C. The second, m × 334,000, melts it at 0°C. The Celsius temperature difference has the same numerical size as the corresponding kelvin difference. The constants are practical approximate values, not universal exact constants; specific heat and latent heat vary slightly with temperature and conditions.

Worked Example

For the default inputs, 1 kg of ice at −10°C:

  1. Warm the ice to its melting point: 1 kg × 2,100 J/(kg·°C) × [0 − (−10)]°C = 21,000 J.
  2. Melt the ice at 0°C: 1 kg × 334,000 J/kg = 334,000 J.
  3. Add the energy: Q = 21,000 J + 334,000 J = 355,000 J, or 355.000 kJ.

The calculator’s displayed result is 355,000 J to three decimal places. This is the idealized energy absorbed by the ice, not necessarily the energy an appliance must draw from its power supply.

Assumptions

  • The ice is pure water ice and is initially at or below 0°C.
  • The melting point is taken as 0°C at standard atmospheric pressure.
  • The approximate values 2,100 J/(kg·°C) and 334,000 J/kg are treated as constant over the calculation.
  • The calculation stops when all the ice has become liquid water at 0°C; it does not include warming the resulting water.
  • No energy is lost to the surrounding air, container, or heating equipment.

What the Melting Temperature Means

Melting is a phase change: molecules in the ordered solid structure gain enough energy to become part of the liquid. At the melting point, added heat can change the fraction of ice that has melted without immediately raising the temperature. That energy is called latent heat of fusion. Once all the ice has melted, further heating raises the liquid water’s temperature.

So “ice melts at 0°C” does not mean every piece of ice begins melting as soon as it is placed in a warm room, nor does it mean the ice itself must be at 0°C before it can absorb heat. Ice at −10°C first warms toward 0°C. A mixture of ice and liquid water can remain close to 0°C while melting proceeds, provided the pressure and composition are ordinary.

Why Pressure and Purity Matter

The familiar 0°C value applies to pure water at approximately one atmosphere. Pressure changes the equilibrium melting temperature. For ordinary ice, increasing pressure lowers the melting point slightly; under everyday pressure changes, the shift is generally small. This pressure behavior is unusual compared with many substances and reflects the fact that ordinary ice is less dense than liquid water.

Dissolved substances also affect freezing and melting. Salt in water lowers the temperature at which the liquid and ice mixture is in equilibrium. The exact value depends on concentration and conditions, so “salt ice” does not have one universal melting temperature. A slushy mixture containing salt water and ice can be colder than 0°C while still containing liquid. This is why a simple 0°C answer is right for pure ice at standard pressure, but not a complete description of every ice-containing mixture.

Energy, Time, and Practical Limits

Temperature tells you how hot or cold something is; energy tells you how much heat transfer is required. Mass matters directly: under the calculator’s assumptions, 2 kg of ice at −10°C takes twice the energy of 1 kg at −10°C. Starting temperature matters too, because colder ice needs more energy to reach 0°C before melting begins.

Energy alone does not determine how long melting takes. Time also depends on the rate of heat transfer, which is affected by surface area, airflow, contact with a warm surface, insulation, and the temperature difference between the ice and its surroundings. The calculator estimates ideal heat absorbed by the ice; it does not predict melt time or appliance electricity use.

For comparison, melting 1 kg of ice already at 0°C requires about 334 kJ. Warming that same kilogram from 0°C to 20°C requires about 84 kJ more, using liquid water’s approximate specific heat capacity of 4,180 J/(kg·°C). Thus, the energy to melt ice is substantial even before considering any warming of the resulting water.

Frequently Asked Questions

Does ice always melt at exactly 0°C?
Pure ice melts at about 0°C at standard atmospheric pressure. Pressure, dissolved substances, and impurities can shift the melting temperature.

What is the melting point of ice in Fahrenheit?
At standard pressure, 0°C is 32°F. This is the familiar melting point of pure water ice.

Can ice be colder than 0°C?
Yes. Ice can cool to temperatures below 0°C and must absorb heat to warm to its melting point before melting under ordinary pressure.

Why can ice and water stay at the same temperature while melting?
At the melting point, heat goes into the phase change rather than immediately raising temperature. The energy used to melt the solid is latent heat of fusion.

Does salt make ice melt at a lower temperature?
Salt lowers water’s freezing point, changing the equilibrium temperature of an ice-and-brine mixture. The shift depends on how much salt is dissolved; it does not change the standard melting point of pure ice.

Related

Formula used
in m | Mass of ice | kg | 1 | 0
in t | Starting ice temperature | °C | -10 | -273.15 | 0
out q | Heat to warm ice to 0 °C and melt it | J | m * (2100 * (0 - t) + 334000) | 3
out qk | Heat to warm and melt the ice | kJ | q / 1000 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →