molecalculator

Moles & Molar Mass

Micromolar Conversion: Units, Formula, and Examples

Calculator No. 01-2381 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Micromolar (µM) means micromoles of solute per liter of final solution: 1 µM = 1 µmol/L = 0.000001 mol/L. This calculator converts a solute mass, molar mass, and final solution volume into molarity and millimolar concentration; enter mass in grams, molar mass in g/mol, and volume in mL.

Formula

The calculator first finds the amount of substance from mass and molar mass, then divides by final solution volume in liters:

c = m / M / (V / 1000)

  • c is molarity in mol/L.
  • m is solute mass in grams (g).
  • M is molar mass in grams per mole (g/mol).
  • V is final solution volume in milliliters (mL); dividing by 1000 converts mL to L.

The second output expresses the same concentration in millimolar: cmM = c × 1000, because 1 mol/L = 1000 mmol/L = 1000 mM. To convert molarity directly to micromolar, multiply mol/L by 1,000,000: concentration in µM = c × 106. Conversely, divide a value in µM by 1,000,000 to get mol/L.

Worked Example

Using the calculator’s default values, the mass is 2.922 g, the molar mass is 58.44 g/mol, and the final volume is 250 mL.

  1. Convert volume to liters: 250 mL / 1000 = 0.250 L.
  2. Calculate the amount: 2.922 g / 58.44 g/mol = 0.050000 mol.
  3. Divide amount by volume: 0.050000 mol / 0.250 L = 0.2000 mol/L.
  4. Convert to millimolar: 0.2000 mol/L × 1000 = 200.00 mM.
  5. Convert to micromolar if needed: 0.2000 mol/L × 1,000,000 = 200,000 µM.

The concentration is therefore 0.2000 M, or 200.00 mM, or 200,000 µM. These are equivalent ways to express the same concentration; they are not different amounts of solute.

Assumptions

  • The entered mass is the mass of the solute, and the entered molar mass matches its chemical form.
  • The volume is the final solution volume, not the volume of solvent added before the solute dissolves.
  • The solution is treated as having a well-defined final volume; this arithmetic does not account for chemical reaction, degradation, purity, or volume changes beyond the measured final volume.

What Micromolar Means

The prefix micro- represents one-millionth, or 10−6. A micromolar solution contains one micromole of dissolved substance in each liter of solution. A micromole is 10−6 mole, so 5 µM means 5 µmol/L, equivalent to 0.000005 mol/L.

Concentration describes the amount of a substance relative to solution volume. It does not by itself say how much total substance is present in a particular container. For instance, 10 µM in 2 mL contains 20 nmol: multiply 10 µmol/L by 0.002 L. The same concentration in a larger volume contains proportionally more substance.

Micromolar units are common in chemistry and molecular biology when concentrations are small but still conveniently expressed without many leading zeros. Related units include nanomolar (nM), millimolar (mM), and molar (M). Each step between these prefixes is a factor of 1000: 1 mM = 1000 µM, and 1 µM = 1000 nM.

Converting Between Common Units

Use the prefix relationships directly, taking care to move the decimal in the correct direction:

  • µM to mM: divide by 1000. For example, 750 µM = 0.750 mM.
  • mM to µM: multiply by 1000. For example, 0.025 mM = 25 µM.
  • µM to M: divide by 1,000,000. For example, 12 µM = 0.000012 M.
  • M to µM: multiply by 1,000,000. For example, 0.003 M = 3000 µM.
  • µM to nM: multiply by 1000. For example, 2.4 µM = 2400 nM.

For a mass-and-volume conversion, first determine moles from mass ÷ molar mass, then divide by the final volume in liters. This is necessary because a mass concentration such as mg/L is not automatically a molar concentration: the conversion depends on the substance’s molar mass.

Using the Calculator and Choosing Inputs

Use the calculator when you know the mass of a solute and want its molar concentration in a specified final volume. The molar mass must correspond to the exact substance and chemical form in question. A salt, hydrate, or free compound can have different molar masses, so a value for a related form may produce a misleading result.

For example, if a compound’s molar mass is 200 g/mol, 0.002 g in a final volume of 0.100 L gives:

0.002 g / 200 g/mol / 0.100 L = 0.0001 mol/L = 100 µM.

If the concentration is already given in mol/L, no mass or molar mass calculation is needed: multiply by 1,000,000 to express it in µM. If it is given in mg/mL or another mass-per-volume unit, convert the mass and volume to compatible units first, then use the molar mass to obtain mol/L.

Common Conversion Mistakes and Limits

  • Using solvent volume instead of final volume: a solution described as 100 mL should have a final volume of 100 mL. Adding solute to 100 mL of solvent may give a different final volume.
  • Missing the mL-to-L conversion: use V/1000 in the formula. Dividing by a volume in mL as though it were liters makes the result 1000 times too small.
  • Reversing a prefix conversion: M to µM requires multiplication by one million; µM to M requires division by one million.
  • Confusing mass concentration with molarity: mg/L and µM cannot be equated without knowing molar mass and converting mass units appropriately.
  • Rounding too early: retain useful digits through intermediate steps, then round the reported concentration to match the precision of the input measurements.

The calculation assumes the stated solute amount is accurate and the compound remains present as described. It does not establish whether a solution is chemically stable, pure, fully dissolved, or appropriate for a particular experiment. Real measurements also have uncertainty; extra decimal places in a calculator output do not make the input measurements more precise. For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.

Frequently Asked Questions

How do I convert µM to M?
Divide the micromolar value by 1,000,000. For example, 25 µM = 0.000025 M.

How many µM are in 1 mM?
There are 1000 µM in 1 mM. The milli- prefix is 10−3 and the micro- prefix is 10−6, a difference of three powers of ten.

How do I calculate µM from milligrams?
Convert milligrams to grams, divide by the substance’s molar mass in g/mol to get moles, and divide by final solution volume in liters. Multiply mol/L by 1,000,000 to get µM.

Is µM the same as µmol/L?
Yes. Micromolar is shorthand for micromoles per liter, so 1 µM = 1 µmol/L.

Can I convert mg/mL directly to µM?
Not without the substance’s molar mass. Convert mg/mL to a mass concentration in compatible units, use molar mass to obtain mol/L, then convert mol/L to µM.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →