The mass percent of carbon in acetone is 62.04% using standard atomic weights and the molecular formula C₃H₆O. This calculator uses the number of carbon atoms and the molar masses of carbon and acetone to return carbon’s share of the compound’s total mass.
Formula
Mass percent is the mass contributed by carbon in one mole of acetone, divided by the molar mass of acetone, multiplied by 100:
Carbon mass percent = 100 × (nC × MC) / Macetone
- nC is the number of carbon atoms in each acetone molecule (3, a count with no unit).
- MC is the atomic molar mass of carbon, 12.011 g/mol.
- Macetone is acetone’s molar mass, 58.080 g/mol, calculated from its formula and the listed standard atomic weights.
The calculator’s second output, carbon mass per mole of acetone, is nC × MC. It is a useful intermediate quantity, but the first output is the requested percentage.
Worked Example
Using the calculator’s default inputs, first calculate the carbon contribution in one mole of acetone:
3 × 12.011 g/mol = 36.033 g/mol
Then divide by acetone’s molar mass and convert the fraction to a percentage:
100 × 36.033 g/mol / 58.080 g/mol = 62.04%
The units of g/mol cancel in the ratio. The result means that in a sample of pure acetone, approximately 62.04% of its mass is carbon. The calculator rounds the percentage to two decimal places and the intermediate carbon mass to three.
Assumptions
- Acetone is represented by the molecular formula C₃H₆O.
- The sample is pure acetone; impurities or a mixture would change the sample’s overall carbon percentage.
- Atomic weights use the IUPAC abridged standard values: carbon 12.011, hydrogen 1.008, and oxygen 15.999.
- The calculation is a formula-based mass fraction; it does not depend on temperature, pressure, or sample volume.
How the Acetone Molar Mass Is Obtained
Acetone is also called propanone and has the structural formula CH₃COCH₃. Counting the atoms gives C₃H₆O: three carbon atoms, six hydrogen atoms, and one oxygen atom. The molar mass is the sum of the contributions from all atoms in one mole of molecules:
(3 × 12.011) + (6 × 1.008) + (1 × 15.999) = 58.080 g/mol
Carbon contributes 36.033 g/mol of that total. Dividing 36.033 by 58.080 gives a mass fraction of about 0.6204; multiplying by 100 expresses it as 62.04%. This is a composition calculation, not a measurement of how much carbon is present in a particular container.
Using the Result in Samples and Calculations
A mass percentage can be used to estimate the mass of carbon in a known mass of pure acetone. Multiply the acetone mass by 0.6204, or equivalently by 62.04% expressed as a fraction.
- For 10.0 g of pure acetone: 10.0 g × 0.6204 ≈ 6.204 g of carbon.
- For 25.0 g of pure acetone: 25.0 g × 0.6204 ≈ 15.51 g of carbon.
These are calculated elemental contributions, not a claim that carbon exists in the sample as separate solid carbon. In acetone, carbon atoms are chemically bonded to hydrogen and oxygen in molecules. The percentage describes the relative mass of the carbon atoms within the compound.
For a mixture, do not apply 62.04% to the entire mixture unless it is entirely acetone. You would need the amount of acetone and the composition of other components to calculate the mixture’s total carbon content. A sample labeled as a solution, for example, includes the solvent and any dissolved substances in its total mass.
Common Errors and Useful Comparisons
A frequent mistake is to divide the number of carbon atoms, 3, by the total number of atoms, 10, and report 30%. That gives carbon’s share by atom count, not by mass. Mass percent weights each element by its atomic mass, so the heavier carbon atoms contribute more than their simple fraction of the atom count.
Another possible confusion is between mass percent and the percentage of a molecule’s atoms that are carbon. Acetone has 10 atoms in each molecule, of which 3 are carbon, so it is 30% carbon by atom count. By mass, however, it is 62.04% carbon. Neither figure is interchangeable with the other.
Small differences in reported results can arise from the atomic-weight convention or rounding. Using the atomic weights shown here gives a molar mass of 58.080 g/mol. If a reference rounds atomic masses more heavily, the final percentage may differ slightly in its last decimal places. Keep enough digits during intermediate calculations and round the final result to the precision appropriate for the inputs.
Frequently Asked Questions
What is the mass percent of carbon in acetone?
It is approximately 62.04%, calculated from acetone’s formula C₃H₆O and standard atomic weights.
Why is acetone 30% carbon by atoms but 62.04% by mass?
Three of the molecule’s ten atoms are carbon, giving 30% by atom count. Carbon atoms are relatively heavy, so they make up a larger share of the molecule’s total mass.
What is acetone’s molar mass?
Using C₃H₆O and standard atomic weights, acetone’s molar mass is 58.080 g/mol.
How much carbon is in 100 g of acetone?
For pure acetone, 100 g × 0.6204 gives approximately 62.04 g of carbon by mass.
Does this percentage change with temperature?
No. The elemental mass fraction of pure acetone follows its chemical formula and does not change with temperature. The composition of an impure sample or mixture can, of course, differ.
Related
Formula used
in nc | Carbon atoms in one molecule | - | 3 | 0 in mc | Atomic mass of carbon | g/mol | 12.011 | 0 in ma | Molar mass of acetone | g/mol | 58.080 | 0 out pct | Mass percent of carbon | % | 100 * nc * mc / ma | 2 out carbon | Carbon mass per mole of acetone | g/mol | nc * mc | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- MD Calc I:T Ratio Calculator and Explanation0.0500 ratio
- Oxygen Mass Number: Isotope Values Explained16 nucleons
- Mass-to-Light Ratio: Meaning and Calculation1.000 M☉/L☉
- M/z Ratio in Mass Spectrometry: Meaning and Calculation1,000.00 Th
- Mass Fraction to Molar Fraction Calculator
- K2 Molar Mass Calculator and Calculation78.1966 g/mol