molecalculator

Moles & Molar Mass

Aspirin C9H8O4 Molar Mass and Calculation

Calculator No. 01-4215 · Updated · Formula and assumptions shown below

Aspirin molar mass 180.159 g/mol
Carbon atoms
9
Set in the form below
Hydrogen atoms
8
Set in the form below
Oxygen atoms
4
Set in the form below
You enter
Carbon atoms, Hydrogen atoms, Oxygen atoms
You get
Aspirin molar mass (g/mol)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of aspirin, with molecular formula C9H8O4, is 180.159 g/mol, or about 180.16 g/mol. Entering the numbers of carbon, hydrogen, and oxygen atoms in the calculator shows how this value is obtained from standard atomic weights.

Formula

Molar mass is the sum of each element’s atomic weight multiplied by the number of its atoms in one molecule:

M = nC(12.011) + nH(1.008) + nO(15.999)

  • M is the molar mass in grams per mole (g/mol).
  • nC, nH, and nO are the counts of carbon, hydrogen, and oxygen atoms in the molecular formula; each is a count, not a mass.
  • 12.011, 1.008, and 15.999 g/mol are the abridged standard atomic weights used here for carbon, hydrogen, and oxygen, respectively.

The subscripts in C9H8O4 specify nine carbon atoms, eight hydrogen atoms, and four oxygen atoms. The calculator applies the formula directly to those counts.

Worked Example

Using the calculator’s default values, the calculation is:

Carbon contribution: 9 × 12.011 g/mol = 108.099 g/mol.

Hydrogen contribution: 8 × 1.008 g/mol = 8.064 g/mol.

Oxygen contribution: 4 × 15.999 g/mol = 63.996 g/mol.

Add the contributions: 108.099 + 8.064 + 63.996 = 180.159 g/mol. Rounded to three decimal places, the calculator reports 180.159 g/mol; to two decimal places, the commonly quoted value is 180.16 g/mol.

Assumptions

  • The formula represents one neutral aspirin molecule, C9H8O4.
  • The calculation uses the specified abridged standard atomic weights; it does not account for the isotope composition of a particular sample.
  • The result is the formula-based molar mass of pure aspirin, not a measurement of a tablet or formulation.

What Molar Mass Means

Molar mass connects the molecular scale to measurable mass. One mole contains exactly 6.02214076 × 1023 specified entities, so one mole of aspirin molecules has a mass of about 180.159 g under this atomic-weight convention. A single molecule is extremely light; the molar mass expresses the mass of a mole, not the mass of one molecule.

The terms molecular mass and molar mass are related but use different units. The molecular mass of one aspirin molecule is approximately 180.159 unified atomic mass units (u), while its molar mass is approximately 180.159 g/mol. Their numerical values are very close because of the way these units are defined, but the quantities and units are not interchangeable.

Aspirin is also called acetylsalicylic acid. Its formula states the number of each kind of atom in a molecule; it does not describe the molecule’s arrangement or prove the purity of a sample. Structural information, such as which atoms are bonded, requires a structural formula or other chemical description.

Using the Result in Chemistry

Molar mass is useful for converting between a sample’s mass and the amount of substance in moles. For pure aspirin, the relationship is:

amount in moles = mass in grams ÷ 180.159 g/mol.

For example, a purely mathematical 1.000 g sample corresponds to 1.000 g ÷ 180.159 g/mol = 0.0055507 mol, or about 5.551 mmol. Conversely, 1.000 mmol corresponds to about 0.180159 g. These are formula-based conversions, not instructions for preparing or using a substance.

For sample calculations, keep track of what the stated mass represents. If it is a mixture, a tablet, or material of unknown purity, dividing its total mass by aspirin’s molar mass does not establish the true amount of aspirin: the calculation assumes the mass is entirely aspirin. A purity value, if known and appropriate to the calculation, would be needed to account for other material.

Common Calculation Errors

  • Using a subscript as a multiplier for the whole formula: each subscript applies only to the element immediately before it. Thus O4 means four oxygen atoms, not four copies of C9H8O.
  • Forgetting an element’s contribution: add the carbon, hydrogen, and oxygen terms. Omitting hydrogen, for example, lowers the result by 8.064 g/mol.
  • Confusing grams with grams per mole: 180.159 g/mol is a property calculated from the formula. A particular sample’s mass is reported in grams.
  • Rounding too early: keep the atomic-weight contributions through the addition, then round the final result to the precision needed. The familiar 180.16 g/mol is the same value rounded to two decimal places.
  • Assuming a formula gives a sample’s purity: a molar-mass calculation alone cannot identify contaminants or verify the composition of a physical sample.

Precision and Scope

Atomic weights are standard values used for practical calculations, and the exact isotopic composition of an actual sample can vary. Consequently, 180.159 g/mol is a calculated value based on the listed weights, not a claim that every sample’s measured molar mass has that exact precision. In most general chemistry work, reporting aspirin’s molar mass as 180.16 g/mol is suitable.

The calculator accepts whole-number atom counts and assumes the entered formula is correct. It does not identify a compound from a formula, calculate a sample’s purity, or account for a different chemical form. If a formula includes parentheses, hydrates, or a charged species, first determine the correct total count of each element and enter those counts; the result depends on the formula supplied.

Frequently Asked Questions

What is the molar mass of aspirin C9H8O4?
Using C = 12.011, H = 1.008, and O = 15.999 g/mol, it is 180.159 g/mol, usually reported as 180.16 g/mol.

How do you calculate the molar mass of aspirin?
Multiply each element’s atomic weight by its subscript and add: (9 × 12.011) + (8 × 1.008) + (4 × 15.999) = 180.159 g/mol.

Why do some sources give 180.16 instead of 180.159?
They are the same calculated value at different rounding precision: 180.159 g/mol rounded to two decimal places is 180.16 g/mol.

Is 180.16 g/mol the mass of one aspirin molecule?
No. It is the mass per mole of aspirin molecules. The mass of one molecule is approximately 180.159 u, not 180.16 grams.

How many moles are in a gram of aspirin?
For pure aspirin, divide the mass in grams by 180.159 g/mol. One gram corresponds to about 0.0055507 mol; this conversion alone does not establish the composition or purity of a sample.

Related

Formula used
in nc | Carbon atoms | - | 9 | 0
in nh | Hydrogen atoms | - | 8 | 0
in no | Oxygen atoms | - | 4 | 0
out mm | Aspirin molar mass | g/mol | nc * 12.011 + nh * 1.008 + no * 15.999 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →