molecalculator

Moles & Molar Mass

Molar Mass of Magnesium Phosphate (Mg3(PO4)2)

Calculator No. 01-12024 · Updated · Formula and assumptions shown below

Amount of substance 0.0380 mol
Number of formula units
2.291 × 1022
Result, rounded to 3 decimal places
Mass of sample
10 g
Set in the form below
Molar mass (Mg3(PO4)2)
262.855 g/mol
Set in the form below
You enter
Mass of sample (g), Molar mass (Mg3(PO4)2) (g/mol)
You get
Amount of substance (mol), Number of formula units
Rounding
4 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of magnesium phosphate, with the chemical formula Mg3(PO4)2, is 262.855 g/mol (commonly rounded to 262.86 g/mol). This value is calculated by summing the atomic weights of three magnesium atoms, two phosphorus atoms, and eight oxygen atoms.

Formula

The molar mass (M) of a compound is the sum of the molar masses of its constituent atoms, each multiplied by its subscript in the chemical formula. For magnesium phosphate, Mg3(PO4)2:

M = (3 × MMg) + (2 × MP) + (8 × MO)

Where:

  • MMg = 24.305 g/mol (magnesium)
  • MP = 30.974 g/mol (phosphorus)
  • MO = 15.999 g/mol (oxygen)

All atomic weights are the IUPAC abridged standard values. The subscript “2” outside the phosphate group means the entire PO4 unit is doubled, so there are 2 phosphorus atoms and 8 oxygen atoms in one formula unit.

Worked Example

Using the default values from the calculator above: a 10.00 g sample of magnesium phosphate.

  1. Calculate the molar mass: (3 × 24.305) + (2 × 30.974) + (8 × 15.999) = 72.915 + 61.948 + 127.992 = 262.855 g/mol.
  2. Divide the mass by the molar mass: 10.00 g ÷ 262.855 g/mol = 0.03804 mol.
  3. Convert to formula units: 0.03804 mol × 6.02214076 × 1023 mol−1 = 2.291 × 1022 formula units.

The calculator gives 0.0380 mol and 2.291 × 1022 formula units, matching the step-by-step calculation.

Assumptions

  • The compound is pure anhydrous magnesium phosphate (no water of hydration).
  • Atomic weights used are the IUPAC abridged standard values; actual isotopic abundances may cause tiny variations.
  • The sample mass is measured accurately, and no other substances are present.

Why the Molar Mass Matters

Molar mass is the bridge between the mass of a substance and the number of particles or moles. In the lab, you rarely weigh out individual atoms—you weigh grams. To prepare a solution of known concentration, convert grams to moles using the molar mass. For example, to make 1 L of a 0.1 M magnesium phosphate solution, you need 0.1 mol × 262.855 g/mol = 26.2855 g of the salt.

In stoichiometry, molar mass lets you predict how much product forms from a given amount of reactant. If you react magnesium chloride with sodium phosphate, the molar mass of magnesium phosphate tells you the theoretical yield. In fertilizer chemistry, magnesium phosphate is a source of both magnesium and phosphorus, and its molar mass helps calculate nutrient content.

Common Mistakes and How to Avoid Them

  • Forgetting the subscript outside the parenthesis: Some students calculate as if there were only one phosphate group, giving 134.9 g/mol instead of 262.855 g/mol. Always multiply the entire PO4 unit by 2.
  • Using incorrect atomic weights: Rounding phosphorus to 31 and oxygen to 16 gives 262 g/mol, a small error. For precise work (e.g., preparing analytical standards), use the full values.
  • Confusing magnesium phosphate with magnesium hydrogen phosphate (MgHPO4, 120.3 g/mol) or magnesium pyrophosphate (Mg2P2O7, 222.6 g/mol): These are different compounds with different formulas and molar masses.
  • Unit mix-ups: Molar mass is in g/mol, not g or mol. When converting mass to moles, always divide mass (g) by molar mass (g/mol).

Hydrates and Other Forms

Magnesium phosphate often appears as a hydrate. The most common is Mg3(PO4)2·8H2O (octahydrate), with a molar mass of 406.98 g/mol. The anhydrous form (262.855 g/mol) is the one usually meant when no water is specified. If you buy a hydrate, check the label—the molar mass you use must include the water molecules. For the octahydrate, add 8 × 18.015 g/mol (144.12 g/mol) to the anhydrous value. Always confirm the exact formula before calculating.

How to Use the Calculator

Enter the mass of your sample in grams and the molar mass (the default is for anhydrous Mg3(PO4)2). The calculator returns the amount in moles and the number of formula units. To use it for a different compound, simply change the molar mass to the appropriate value. The calculator works for any substance, not just magnesium phosphate—just replace the molar mass with your target compound’s value.

For a hydrate, adjust the molar mass input manually (e.g., 406.98 for the octahydrate). The calculator does not automatically add water molecules.

Frequently Asked Questions

Is magnesium phosphate the same as trimagnesium phosphate?

Yes. Trimagnesium phosphate is another name for Mg3(PO4)2. The “tri” refers to the three magnesium ions. The molar mass is the same: 262.855 g/mol.

What is the molar mass of magnesium phosphate dibasic?

Magnesium phosphate dibasic is MgHPO4, with a molar mass of 120.284 g/mol (Mg 24.305 + H 1.008 + P 30.974 + 4×O 15.999). It has one hydrogen atom, so it is not the same as the tribasic form.

How many grams are in one mole of magnesium phosphate?

Exactly its molar mass: 262.855 grams. One mole of any substance contains Avogadro’s number of formula units (6.022 × 1023), and its mass in grams equals its molar mass.

Why is the molar mass not a whole number?

Because atomic weights are weighted averages of naturally occurring isotopes. Magnesium has isotopes with masses 24, 25, and 26, and their average is 24.305, not 24. The same applies to phosphorus and oxygen.

Does magnesium phosphate dissolve in water?

Anhydrous magnesium phosphate is sparingly soluble in water (about 0.02 g per 100 mL at 25 °C). The hydrated forms are slightly more soluble, but still low. This low solubility is why it is used in some antacids and as a slow-release fertilizer.

Can I use this molar mass for magnesium phosphate monobasic?

No. Monobasic magnesium phosphate is Mg(H2PO4)2, with a molar mass of 218.28 g/mol. It has two dihydrogen phosphate groups. Always check the chemical formula before using a molar mass.

Practical Context and Limitations

The molar mass calculation assumes the compound is pure and stoichiometric. Real samples may contain impurities or moisture, which will affect the actual mass-to-mole conversion. For precise analytical work, dry the sample according to the relevant standard method and measure the mass carefully. The calculator gives the theoretical value; your measured mass may differ slightly due to handling.

When preparing solutions, remember that magnesium phosphate has low solubility—you may need to use a different salt (e.g., magnesium chloride) and phosphate source to achieve higher concentrations. Follow your lab method, the safety data sheet (SDS) and your supervisor.

Related

Formula used
in m | Mass of sample | g | 10.00 | 0
in mm | Molar mass (Mg3(PO4)2) | g/mol | 262.855 | 0.001
out n | Amount of substance | mol | m / mm | 4
out nm | Number of formula units | - | n * 6.02214076e23 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →