molecalculator

Moles & Molar Mass

Molar Mass of P: Phosphorus Explained

Calculator No. 01-4187 · Updated · Formula and assumptions shown below

Molar mass of phosphorus 30.974 g/mol
Amount from sample mass
1.0000 mol
= Phosphorus sample mass ÷ Molar mass of phosphorus
Mass from amount
30.974 g
= Amount of phosphorus × Molar mass of phosphorus
Phosphorus sample mass
30.974 g
Set in the form below
You enter
Phosphorus sample mass (g), Amount of phosphorus (mol)
You get
Molar mass of phosphorus (g/mol), Amount from sample mass (mol), Mass from amount (g)
Rounding
3 dp · 4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

If “P” means the chemical element phosphorus, its molar mass is 30.974 g/mol (often rounded to 30.97 g/mol). Enter the mass of a phosphorus sample to calculate its amount in moles, or enter a mole amount to find its mass; the calculator uses 30.974 g/mol as the molar mass.

Formula

The molar mass of elemental phosphorus, represented by P, is its standard atomic weight expressed in grams per mole. Use M(P) = 30.974 g/mol. For a sample, the amount in moles is n = m / M, and the sample mass is m = n × M.

  • M is molar mass, in grams per mole (g/mol).
  • m is sample mass, in grams (g).
  • n is amount of substance, in moles (mol).

The calculator’s first result is the requested molar mass. The other results show how that value converts a mass to moles and a mole amount to mass. Those conversions assume the sample is phosphorus rather than a phosphorus-containing compound or a mixture.

Worked Example

Using the calculator’s default mass of 30.974 g and amount of 1 mol:

  1. Molar mass: M(P) = 30.974 g/mol.
  2. Amount from the sample: n = m / M = 30.974 g / 30.974 g/mol = 1.0000 mol.
  3. Mass for the entered amount: m = n × M = 1 mol × 30.974 g/mol = 30.974 g.

The first output is 30.974 g/mol, the molar mass of phosphorus. The final mass output is also 30.974 g at the calculator’s three-decimal display precision.

Assumptions

  • The symbol P refers to the element phosphorus, not a compound, phosphate ion, or shorthand defined differently in a particular context.
  • The value uses the IUPAC abridged standard atomic weight for phosphorus: 30.974.
  • Mass is entered in grams and amount in moles; the calculator does not convert other units.
  • The sample is treated as pure phosphorus for the mass-to-moles conversion. Impurities or other elements change the sample’s effective composition.

Why Phosphorus Has This Molar Mass

A mole contains exactly 6.02214076 × 1023 specified entities. For an element, those entities are usually atoms when using its atomic molar mass. The standard atomic weight of phosphorus is approximately 30.974 atomic mass units per atom; expressed per mole, the corresponding molar mass is approximately 30.974 grams per mole.

Standard atomic weights reflect the masses of naturally occurring isotopes and their abundances. Phosphorus is commonly treated with a single standard atomic weight, 30.974, in routine calculations. The number is not the mass of every individual phosphorus atom: isotope-specific atoms have slightly different masses. For typical chemistry and stoichiometry, the standard value is the appropriate one.

Because a molar mass is a mass-per-amount ratio, its numerical value in g/mol matches the atomic-weight number used here. Do not confuse g/mol with grams: 30.974 g/mol describes a conversion factor, while 30.974 g is the mass of one mole of phosphorus under this convention.

What “P” Means in Different Contexts

In the periodic table and chemical formulas, uppercase P is the element symbol for phosphorus. A bare P therefore has a molar mass of 30.974 g/mol. But the same letter can occur inside formulas where the whole substance has a different molar mass.

  • Phosphorus atom, P: 30.974 g/mol.
  • Phosphorus molecule, P4: 4 × 30.974 = 123.896 g/mol, approximately 123.90 g/mol.
  • Phosphate ion, PO43−: calculate the mass of phosphorus plus four oxygen atoms, about 94.97 g/mol for the ion’s formula mass.
  • Phosphoric acid, H3PO4: include hydrogen, phosphorus, and oxygen; its molar mass is about 97.99 g/mol.

These examples show why identifying the complete chemical formula matters. A letter in a compound formula is one component, not the molar mass of the entire compound. For an ionic formula unit, “molar mass” is often used in general calculations even though the substance may not consist of separate molecules.

Using the Value in Calculations

Use 30.974 g/mol when converting between the mass of elemental phosphorus and the amount of phosphorus in moles. For example, a 15.487 g pure sample contains 15.487 / 30.974 = 0.50000 mol. Conversely, 0.250 mol of phosphorus has a mass of 0.250 × 30.974 = 7.7435 g.

Keep units visible while calculating: grams divided by grams per mole leaves moles, while moles multiplied by grams per mole leaves grams. If a problem gives milligrams, convert first: 1 g = 1000 mg. For 250 mg, use 0.250 g, giving 0.250 / 30.974 ≈ 0.0080713 mol. Rounding the molar mass too early can create small differences, so retain 30.974 through intermediate steps and round the final answer to match the precision of the measured data.

For a compound, first find the formula’s molar mass by adding the atomic masses of all atoms shown. For example, in H3PO4, count three H atoms, one P atom, and four O atoms; do not use 30.974 g/mol as the compound’s value. In a reaction calculation, the balanced equation determines the mole ratios after the mass has been converted to moles.

Common Sources of Confusion

  • Element versus molecule: P and P4 have different molar masses because the latter formula contains four phosphorus atoms.
  • Element versus compound: the phosphorus contribution is not the total molar mass of phosphate or another phosphorus compound.
  • Atomic mass versus molar mass: atomic mass is commonly expressed in u; molar mass is expressed in g/mol. Their numerical values are nearly the same for this calculation, but their units and meanings differ.
  • Mass versus amount: grams measure mass; moles measure amount of substance. The molar mass links the two but does not make them interchangeable.
  • Purity: using the full measured mass as phosphorus overestimates the amount if the sample contains other substances. A purity correction requires a known composition or purity fraction.

Phosphorus samples and compounds can have different hazards depending on their form. This calculator is for general study and arithmetic, not for planning a preparation or handling procedure. For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.

Frequently Asked Questions

What is the molar mass of phosphorus P?
The standard value used here is 30.974 g/mol, commonly rounded to 30.97 g/mol.

Is the molar mass of phosphorus 31 g/mol?
31 g/mol is a convenient rounded value. Use 30.974 g/mol when a calculation needs more precision, then round the final result appropriately.

Is P the same as P4?
No. P denotes one phosphorus atom in a formula, while P4 contains four atoms. Its molar mass is about 123.896 g/mol.

How many moles are in 1 gram of phosphorus?
Divide the mass by the molar mass: 1 g / 30.974 g/mol ≈ 0.032285 mol.

How do I find the molar mass of a phosphorus compound?
Use its full chemical formula and add the atomic masses of every atom, counting subscripts. The answer will generally be greater than the phosphorus contribution alone.

Related

Formula used
in m | Phosphorus sample mass | g | 30.974 | 0
in n | Amount of phosphorus | mol | 1 | 0
out mm | Molar mass of phosphorus | g/mol | 30.974 | 3
out np | Amount from sample mass | mol | m / mm | 4
out mp | Mass from amount | g | n * mm | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →