molecalculator

Moles & Molar Mass

Molar Mass of Urea and Glucose: Values & How to Find Them

Calculator No. 01-9887 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of urea (CH4N2O) is 60.06 g/mol, and the molar mass of glucose (C6H12O6) is 180.16 g/mol. These values are calculated by summing the atomic weights of each element in the molecular formula, using the IUPAC standard atomic weights.

Formula

The molar mass (M) of a compound is the sum of the atomic masses of all atoms in its molecular formula:

M = (number of atoms of element 1 × atomic weight of element 1) + (number of atoms of element 2 × atomic weight of element 2) + …

  • For urea, CH4N2O: M = (1 × 12.011) + (4 × 1.008) + (2 × 14.007) + (1 × 15.999) = 60.06 g/mol
  • For glucose, C6H12O6: M = (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 180.16 g/mol

Each atomic weight is expressed in grams per mole (g/mol), so the sum is also in g/mol.

Worked Example

Let’s calculate the molar mass of urea step by step, and then use it to prepare a solution.

Step 1: Write the molecular formula. Urea is CH4N2O.

Step 2: Multiply each atomic weight by the number of atoms.

  • Carbon: 1 × 12.011 = 12.011 g/mol
  • Hydrogen: 4 × 1.008 = 4.032 g/mol
  • Nitrogen: 2 × 14.007 = 28.014 g/mol
  • Oxygen: 1 × 15.999 = 15.999 g/mol

Step 3: Sum the contributions. 12.011 + 4.032 + 28.014 + 15.999 = 60.056 ≈ 60.06 g/mol.

Now, suppose you want to make 250 mL of a 0.200 M urea solution. Using the calculator above with mass = 2.922 g, molar mass = 60.06 g/mol, and volume = 250 mL:

c = m / (mm × (v/1000)) = 2.922 / (60.06 × 0.250) = 2.922 / 15.015 = 0.1946 M ≈ 0.195 M.

(The default in the calculator uses 58.44 g/mol for NaCl, but for urea you would change the molar mass to 60.06.)

Assumptions

  • The atomic weights used are the IUPAC abridged standard values (H 1.008, C 12.011, N 14.007, O 15.999).
  • The molar mass is for the pure, anhydrous compound.
  • For solution calculations, the final volume is used (not the solvent volume alone).
  • Dilute solution behavior is assumed—no volume contraction or expansion.

Why Molar Mass Matters

Molar mass is the bridge between the mass of a substance and the number of moles, which is the fundamental unit for chemical reactions and solution preparation. For urea and glucose, both are common laboratory reagents and biological molecules, so knowing their molar masses lets you:

  • Convert between grams and moles when writing reaction stoichiometry.
  • Prepare solutions of exact molarity (e.g., 1 M glucose for cell culture media).
  • Calculate osmotic pressure or freezing point depression, which depend on the number of particles in solution.
  • Determine the concentration of a solution from a measured mass (as in the calculator above).

For example, in a biology lab, you might need 500 mL of 0.5 M glucose. Using the molar mass 180.16 g/mol, you would weigh out 0.5 mol × 180.16 g/mol = 90.08 g of glucose and dissolve in water to a final volume of 500 mL.

How to Calculate Molar Mass Yourself

You can calculate the molar mass of any compound by following these steps:

  1. Write the correct molecular formula (e.g., urea is CH4N2O, not CH4NO).
  2. Look up the atomic weight of each element from a periodic table (use the standard atomic weights, not the mass number of a specific isotope).
  3. Multiply each atomic weight by the number of atoms of that element in the formula.
  4. Add all the products together.
  5. Round to two decimal places if desired (e.g., 60.06 g/mol).

For hydrated compounds (like CuSO4·5H2O), you must include the water molecules in the mass. For urea and glucose, there are no hydrates in common use.

Common Mistakes and Misconceptions

  • Using the wrong formula: Glucose is C6H12O6, not C6H6O6 (that would be a different molecule). Urea is CH4N2O, not CH3NO.
  • Forgetting to multiply by the subscript: For glucose, you must multiply carbon by 6, hydrogen by 12, and oxygen by 6. A common error is using 1.008 for hydrogen instead of 12 × 1.008 = 12.096.
  • Mixing up g/mol and g: Molar mass is grams per mole, not grams. It is a conversion factor, not a mass.
  • Rounding too early: If you round each atomic weight to the nearest whole number (e.g., H = 1, C = 12, N = 14, O = 16), you get 60 for urea and 180 for glucose, which is close but not exact. For precise work, use the standard atomic weights.

Urea vs. Glucose: Comparison and Context

Urea (60.06 g/mol) is a small, nitrogen-rich molecule produced in the liver as a waste product of protein metabolism. It is highly soluble in water and is used in fertilizers, plastics, and as a denaturant in biochemistry. Glucose (180.16 g/mol) is a monosaccharide sugar that is a primary energy source for cells. It is the monomer of starch and cellulose, and its molar mass is exactly three times that of urea (180.16 / 60.06 ≈ 3). This difference reflects the larger number of atoms: glucose has 24 atoms, while urea has 8.

In solution, both are non-electrolytes (they do not dissociate into ions), so 1 mole of urea and 1 mole of glucose each produce 1 mole of particles. This is important for colligative properties like osmotic pressure. For instance, a 1 M urea solution and a 1 M glucose solution have the same osmotic pressure if temperature is the same.

Frequently Asked Questions

What is the molar mass of urea in kg/mol?

To convert from g/mol to kg/mol, divide by 1000. So urea is 0.06006 kg/mol, and glucose is 0.18016 kg/mol. In most chemistry calculations, g/mol is used because it gives convenient numbers.

How many moles are in 5 grams of glucose?

Use the formula: moles = mass / molar mass. For 5 g of glucose: 5 g / 180.16 g/mol = 0.02775 mol, or about 27.8 mmol. This is a common calculation when preparing small volumes of solution.

Is the molar mass of urea the same as its molecular weight?

Yes, in practice they are the same numerical value, but the units differ. Molar mass is expressed in g/mol, while molecular weight is often given as a dimensionless number (e.g., 60.06). In strict scientific terms, molecular weight is the mass of one molecule, but in lab use they are interchangeable.

Why do some sources say glucose molar mass is 180.16 and others 180.156?

The difference comes from rounding the atomic weights. Using more precise atomic weights (e.g., H = 1.00794, C = 12.0107, O = 15.9994) gives 180.156 g/mol. The IUPAC abridged values (H 1.008, C 12.011, O 15.999) give 180.16 g/mol. Both are acceptable; the difference is less than 0.01%.

Can I use the molar mass to convert grams to molecules?

Yes. First convert grams to moles using the molar mass, then multiply by Avogadro’s number (6.022 × 1023 molecules/mol). For example, 1 gram of urea contains (1 g / 60.06 g/mol) × 6.022 × 1023 = 1.003 × 1022 molecules.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →