The molar mass of sodium hydroxide (NaOH) is 39.997 g/mol, commonly rounded to 40.00 g/mol. Enter a mass of NaOH below to calculate its amount in moles; the result uses the standard atomic weights shown in the formula.
Formula
Molar mass is the mass of one mole of a substance. For sodium hydroxide, add the atomic weights of the atoms in its formula:
M(NaOH) = Ar(Na) + Ar(O) + Ar(H)
- Sodium, Na: 22.990 g/mol
- Oxygen, O: 15.999 g/mol
- Hydrogen, H: 1.008 g/mol
Thus, M(NaOH) = 22.990 + 15.999 + 1.008 = 39.997 g/mol. The calculator’s first result uses n = m / M, where n is amount in mol, m is the entered NaOH mass in g, and M is molar mass in g/mol. Its second result estimates the number of formula units: N = n × 6.02214076 × 1023, using the exact Avogadro constant in mol−1. A formula unit is the simplest integer ratio represented by the ionic formula NaOH.
Worked Example
For the default input, the mass is 40 g. First calculate the molar mass from the displayed atomic weights:
M(NaOH) = 22.990 + 15.999 + 1.008 = 39.997 g/mol
Then divide mass by molar mass:
n = 40 g / 39.997 g/mol = 1.000075 mol ≈ 1.0001 mol
Finally, estimate formula units from the unrounded amount:
N = 1.000075 mol × 6.02214076 × 1023 mol−1 ≈ 6.0226 × 1023 formula units
The calculator displays the amount to four decimal places and the particle estimate to three decimal places, so its outputs are 1.0001 mol and 6.023 × 1023 formula units.
Assumptions
- The entered mass is pure, anhydrous NaOH, with no water or other material included.
- The formula-unit count treats NaOH as having one NaOH formula unit per counted unit; it is not a count of intact molecules in a solid ionic lattice.
- Atomic weights are the stated abridged standard values, so the calculator’s molar mass is 39.997 g/mol.
What Molar Mass Means
Molar mass connects a measurable mass to an amount of substance. A mole contains exactly 6.02214076 × 1023 specified entities. In this case, those entities are NaOH formula units. The molar mass says that one mole of pure sodium hydroxide has a mass of about 39.997 g.
The formula NaOH records a 1:1:1 atom ratio: one sodium atom, one oxygen atom, and one hydrogen atom per formula unit. In ordinary solid sodium hydroxide, the ions form an extended ionic structure rather than separate NaOH molecules. “Formula unit” is therefore the more precise term for the repeating composition used in the calculation.
Using the Result in Chemistry Calculations
The value is useful when converting between a weighed quantity and moles for stoichiometry. For example, a theoretical calculation that calls for 0.250 mol of pure NaOH corresponds to:
m = n × M = 0.250 mol × 39.997 g/mol = 9.99925 g, or about 10.00 g.
This is a mathematical conversion, not a guarantee that a weighed sample contains that amount of NaOH. Sodium hydroxide is hygroscopic: it absorbs water from air, and it can also absorb carbon dioxide and form carbonate. Consequently, material exposed to air may not have the purity assumed by a simple mass-to-moles calculation. For quantitative work, use the purity or assay information specified by the method rather than treating an uncertain sample as perfectly pure.
For a solution calculation, molarity is amount divided by final solution volume in liters: c = n / V. The volume must be the final solution volume, not simply the volume of water initially used. The calculator here converts mass to amount; it does not determine a solution concentration unless a suitable final volume is also known.
Rounding, Purity, and Common Mistakes
- Rounding too early: Use 39.997 g/mol in intermediate calculations when matching this calculator. Writing 40.00 g/mol is convenient for many estimates, but can produce small differences in the last digits.
- Mixing mass and amount: Grams measure mass; moles measure amount. The numerical value 40 g is approximately one mole of NaOH, not 40 moles.
- Ignoring purity: If a sample has a stated mass fraction purity p, the pure NaOH mass is sample mass × p, and that corrected mass is what belongs in the mole calculation. The calculator assumes 100% purity.
- Confusing particles with molecules: The particle output is formula units, not a claim that solid NaOH consists of isolated molecules.
- Changing the chemical formula: Hydrated material or a different sodium compound has a different composition and molar mass. Do not use NaOH’s value for another substance.
Safety and Scope
Sodium hydroxide is corrosive and can cause severe skin and eye burns. Its dissolution in water releases heat, and splashes are a serious hazard. This page provides chemistry arithmetic only, not a preparation procedure. Follow your lab method, the safety data sheet (SDS), and your supervisor. Use the safety controls and protective equipment required by the applicable procedure, and consult the SDS for substance-specific handling and emergency guidance.
Frequently Asked Questions
What is the molar mass of NaOH?
The molar mass is 39.997 g/mol from the stated atomic weights. It is commonly reported as 40.00 g/mol at four significant figures.
How many moles are in 1 gram of NaOH?
Using 39.997 g/mol, 1 g ÷ 39.997 g/mol = about 0.02500 mol.
How many grams of NaOH are in one mole?
One mole has a mass of 39.997 g, often rounded to 40.00 g. This refers to pure NaOH.
Is 40 g/mol exact?
No. It is a useful rounded value. The calculation from the listed standard atomic weights gives 39.997 g/mol.
Does NaOH have a molecular mass?
For solid sodium hydroxide, “formula mass” is more precise because it is an ionic solid. Its formula-unit mass corresponds to a molar mass of 39.997 g/mol.
Related
Formula used
in m | Sodium hydroxide mass | g | 40 | 0 out n | Amount of NaOH | mol | m / (22.990 + 15.999 + 1.008) | 4 out N | Formula units of NaOH | | n * 6.02214076e23 | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Air Pressure and Density: How They Are Related
- Air Density and Altitude: What Changes as You Climb1.225 kg/m^3
- Density vs Pressure: What Each Measures and Why1.000 kg/m^3
- DMF Density vs Pressure Calculator949.15 kg/m3
- Density vs Pressure Graph: How to Read the Relationship1,000.046 kg/m^3
- Air Pressure vs. Air Density: What’s the Difference?