molecalculator

Moles & Molar Mass

Molar Mass to Grams: Formula and Examples

Calculator No. 01-4191 · Updated · Formula and assumptions shown below

Mass 2.9220 g
Amount of substance
50.00 mmol
= Amount of substance × 1000
Amount of substance
0.05 mol
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Amount of substance (mol), Molar mass (g/mol)
You get
Mass (g), Amount of substance (mmol)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert moles to grams, multiply the amount in moles by the substance’s molar mass in grams per mole: mass (g) = amount (mol) × molar mass (g/mol). Enter the amount and molar mass below to calculate the mass in grams; the calculator also reports the corresponding amount in millimoles.

Formula

The formula is m = n × M, where m is mass in grams (g), n is amount of substance in moles (mol), and M is molar mass in grams per mole (g/mol). The units cancel as follows: mol × g/mol = g. The calculator’s first result is the mass in grams; its second result converts the entered amount to millimoles using 1 mol = 1000 mmol.

Molar mass is the mass of one mole of a specified chemical substance. Its numerical value depends on the substance’s chemical formula and, for some materials, its composition or isotopic makeup. For a pure compound, calculate it by adding the atomic masses of all atoms represented in its chemical formula. Atomic masses are commonly expressed in unified atomic mass units, while molar mass is expressed in g/mol; their numerical values correspond for ordinary chemistry calculations.

Worked Example

The calculator’s default inputs are n = 0.05 mol and M = 58.44 g/mol. For sodium chloride, whose molar mass is approximately 58.44 g/mol using standard atomic weights:

  1. Use m = n × M.
  2. Substitute the default values: m = 0.05 mol × 58.44 g/mol.
  3. Cancel mol and mol in the denominator: m = 2.922 g.

The calculator displays 2.9220 g when rounded to four decimal places. Its other result is 0.05 mol × 1000 mmol/mol = 50.00 mmol.

Assumptions

  • The entered molar mass applies to the substance and chemical form being considered.
  • The amount is expressed in moles, and the requested mass is in grams.
  • The calculation treats the sample as the specified substance; it does not correct for impurities, moisture, or a mixture unless those are accounted for separately.

How to Find Molar Mass

Use the chemical formula to count each type of atom, then multiply each count by that element’s standard atomic weight and add the results. For example, water is H2O. Using H = 1.008 and O = 15.999:

M(H2O) = 2 × 1.008 + 1 × 15.999 = 18.015 g/mol.

For 0.250 mol of water, the mass is 0.250 mol × 18.015 g/mol = 4.50375 g, or about 4.504 g. A formula with parentheses requires multiplying the atoms inside by the subscript outside them. For example, Ca(OH)2 contains one calcium atom, two oxygen atoms, and two hydrogen atoms.

Use an appropriate atomic-weight convention for the level of precision needed. Common abridged standard atomic weights include H 1.008, C 12.011, N 14.007, O 15.999, Na 22.990, and Cl 35.45. These values are suitable for routine calculations, but a particular sample’s isotopic composition can affect its precise molar mass.

When to Use the Conversion

The conversion is useful whenever a problem gives an amount in moles but asks for a mass, or when you need to translate a calculated chemical amount into grams for a study or lab-planning calculation. It is the reverse of converting grams to moles: divide mass in grams by molar mass in g/mol to obtain moles.

  • Known moles, find grams: multiply by molar mass.
  • Known grams, find moles: divide by molar mass.
  • Known particles, find grams: first convert particles to moles using the Avogadro constant, 6.02214076 × 1023 particles per mole, then multiply by molar mass.

For a solution, distinguish the mass of solute from the mass of the whole solution. This formula converts moles of a specified substance into its mass; it does not calculate solution concentration or tell you how much solvent to use. When a procedure specifies a final solution volume, that is not necessarily the same as the volume of solvent added.

Units, Precision, and Common Errors

The units must match the formula. If molar mass is in g/mol, enter the amount in mol to get grams. If your amount is in millimoles, convert it first: mmol ÷ 1000 = mol. Alternatively, multiply mmol by a molar mass in g/mol and divide by 1000 to obtain grams. Do not enter a molar mass in kg/mol as though it were g/mol; convert it first using 1 kg = 1000 g.

Rounding is another frequent source of discrepancies. Keep extra digits through intermediate steps and round the final answer to a precision justified by the inputs or the assignment. A calculator can display more digits than a measured amount warrants. For example, if a mass or mole amount is known to only two significant figures, reporting many decimal places does not make the result more accurate.

Check the substance’s exact formula and form. An anhydrous compound and its hydrate have different molar masses because the hydrate includes water molecules in its formula. Likewise, a molar mass for a neutral compound should not be substituted for that of a salt or a different chemical form. The calculation is only as appropriate as the formula and molar mass entered.

Limits and Interpretation

This is a direct unit conversion, not a measurement of how much material is actually present. It assumes the entered mole amount and molar mass describe the same substance. It does not determine purity, yield, reaction completion, or the amount of product formed in a reaction. Those questions require additional information, such as a measured composition or a balanced chemical equation and limiting-reactant calculation.

For lab planning, arithmetic alone does not establish that a substance or procedure is safe or suitable. Follow your lab method, the safety data sheet (SDS), and your supervisor. Do not use a calculated mass as a substitute for the required handling, verification, or measurement practices.

Frequently Asked Questions

What is the formula for converting molar mass to grams?
Multiply moles by molar mass: grams = moles × grams per mole.

How do I convert grams to moles?
Divide the mass in grams by the molar mass in g/mol. The result is the amount in moles.

What if my amount is in millimoles?
Convert millimoles to moles by dividing by 1000, then multiply by molar mass. Equivalently, grams = mmol × (g/mol) ÷ 1000.

How do I calculate molar mass from a chemical formula?
Multiply each element’s atomic weight by the number of its atoms in the formula, then add those contributions, including any multipliers from parentheses.

Is molar mass the same as molecular weight?
They are closely related but refer to different quantities and units. Molecular weight is a relative, dimensionless quantity; molar mass is the mass per mole, commonly given in g/mol.

Why does my answer differ slightly from another calculator?
Calculators may use different atomic-weight precision, isotopic assumptions, or rounding rules. Check the formula, chemical form, units, and significant figures before comparing results.

Related

Formula used
in n | Amount of substance | mol | 0.05 | 0
in mm | Molar mass | g/mol | 58.44 | 0
out g | Mass | g | n * mm | 4
out mmol | Amount of substance | mmol | n * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →