molecalculator

Moles & Molar Mass

Molar Volume of Ethanol: Value & How to Find It

Calculator No. 01-8974 · Updated · Formula and assumptions shown below

Molar volume 58.39 mL/mol
Volume of sample
0.0584 L
= Molar volume ÷ 1000
Mass of ethanol
46.07 g
Set in the form below
Density of ethanol
0.789 g/mL
Set in the form below
You enter
Mass of ethanol (g), Density of ethanol (g/mL)
You get
Molar volume (mL/mol), Volume of sample (L)
Rounding
2 dp · 4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar volume of ethanol (C2H5OH) at 25 °C and 1 atm is approximately 58.4 cm3/mol (0.0584 L/mol). This is the volume occupied by one mole (about 46.07 g) of pure liquid ethanol, calculated by dividing its molar mass by its density at that temperature. Below, you’ll find the exact formula, how temperature changes the value, and how to use it in lab calculations.

Formula

The molar volume (Vm) of a pure liquid is the volume occupied by one mole of that substance. For a liquid, it is calculated from the molar mass (M) and the density (ρ):

Vm = M / ρ

  • Vm – molar volume, in mL/mol (or cm3/mol)
  • M – molar mass of ethanol, 46.07 g/mol (using IUPAC atomic weights: C 12.011 × 2 + H 1.008 × 6 + O 15.999 = 46.069 g/mol)
  • ρ – density of ethanol at the given temperature, in g/mL (0.789 g/mL at 25 °C)

For gases, the molar volume is different: at 0 °C and 1 atm, an ideal gas occupies 22.414 L/mol. But ethanol is a liquid at room temperature, so we use the liquid density, not the gas law.

Worked Example

Using the default values from the calculator (mass = 46.07 g, density = 0.789 g/mL):

  1. Write the formula: Vm = M / ρ
  2. Insert the numbers: Vm = 46.07 g / 0.789 g/mL
  3. Divide: 46.07 / 0.789 = 58.39 mL/mol (rounded to 58.4 mL/mol)

The calculator shows 58.39 mL/mol, which rounds to 58.4 mL/mol. That means one mole of ethanol – about 46.07 g – takes up 58.4 mL of space as a pure liquid at 25 °C.

Assumptions

  • Ethanol is pure (100% by volume, no water).
  • Density is 0.789 g/mL at 25 °C (standard lab temperature).
  • Molar mass is 46.07 g/mol (IUPAC abridged weights).
  • Temperature is 25 °C; density changes with temperature, so the molar volume changes too.

Why Does Temperature Matter?

Liquids expand when heated, so density decreases. Ethanol’s density at 20 °C is 0.789 g/mL, but at 30 °C it drops to about 0.781 g/mL. Using the formula:

At 20 °C: 46.07 / 0.789 = 58.4 mL/mol (same as 25 °C, because density is similar)

At 30 °C: 46.07 / 0.781 = 59.0 mL/mol

So a 5 °C rise increases the molar volume by about 0.6 mL/mol. For precise work, always record the temperature and use the density at that temperature. Most published density tables list values at 20 °C or 25 °C.

How to Use the Molar Volume in Calculations

The molar volume is handy when converting between moles and volume for liquid reagents. For example, if you need 0.5 mol of ethanol for a reaction:

  • Volume = moles × molar volume = 0.5 mol × 58.4 mL/mol = 29.2 mL
  • Or use mass: 0.5 mol × 46.07 g/mol = 23.035 g, then volume = mass / density = 23.035 / 0.789 = 29.2 mL

This is useful when preparing solutions where ethanol is the solvent or a reactant. Always measure volume at the same temperature as the density value you use.

Common Mistakes and Misconceptions

  • Using the gas molar volume (22.4 L/mol) – that applies to ideal gases at STP, not to liquid ethanol. Ethanol’s molar volume is about 0.058 L/mol, nearly 400 times smaller.
  • Confusing mL and L – the calculator outputs mL/mol, but sometimes you need L/mol. Divide by 1000: 58.4 mL/mol = 0.0584 L/mol.
  • Ignoring temperature – density changes with temperature; using a density measured at a different temperature introduces error.
  • Assuming 100% ethanol – commercial ethanol often contains water (e.g., 95% or 96% v/v). The density of 95% ethanol is about 0.805 g/mL, so the molar volume would be slightly different. For pure ethanol, use 0.789 g/mL.

Comparisons: Ethanol vs. Water vs. Other Liquids

Water has a molar mass of 18.015 g/mol and a density of 0.997 g/mL at 25 °C, so its molar volume is 18.07 mL/mol. Ethanol’s molar volume (58.4 mL/mol) is much larger because the molecule is bigger and has a lower density. Methanol (CH3OH) has a molar mass of 32.04 g/mol and density 0.792 g/mL, giving a molar volume of 40.5 mL/mol. So ethanol sits between methanol and heavier alcohols like propanol (74.12 g/mol, density 0.803 g/mL, molar volume 92.3 mL/mol).

This comparison helps in understanding how molecular size and intermolecular forces affect packing. Ethanol’s hydrogen bonding makes it denser than hydrocarbons of similar molar mass, but its molar volume is still larger than water’s because the ethyl group takes up space.

Limits of the Simple Formula

The formula Vm = M/ρ assumes the liquid is pure and incompressible. In reality, density varies slightly with pressure, but for most lab work at atmospheric pressure, the effect is negligible. Also, if you’re working with a mixture (e.g., ethanol-water), the molar volume of the mixture is not a simple weighted average because of volume contraction – ethanol-water mixtures have a smaller total volume than the sum of the parts. For mixtures, you need partial molar volumes, which are beyond this simple calculation.

Frequently Asked Questions

What is the molar volume of ethanol in L/mol?

At 25 °C, the molar volume is 0.0584 L/mol (58.4 mL/mol). To get liters, divide the mL value by 1000.

Why is the molar volume of ethanol not 22.4 L/mol?

22.4 L/mol is the molar volume of an ideal gas at standard temperature and pressure (0 °C, 1 atm). Ethanol is a liquid at room temperature, so it occupies much less volume. The gas molar volume applies only to gases.

Does the molar volume of ethanol change with temperature?

Yes. As temperature increases, ethanol expands, density decreases, and molar volume increases. For example, at 30 °C the molar volume is about 59.0 mL/mol compared to 58.4 mL/mol at 25 °C.

How do I calculate the volume of ethanol needed for a specific number of moles?

Multiply the number of moles by the molar volume. For 0.25 mol: 0.25 × 58.4 = 14.6 mL. Alternatively, use the mass: 0.25 × 46.07 = 11.52 g, then divide by density (11.52 / 0.789 = 14.6 mL).

What is the density of ethanol at 25 °C?

The density of pure ethanol at 25 °C is 0.789 g/mL. This is the standard value used in most calculations. At 20 °C, it is also 0.789 g/mL (the density is relatively stable over this small range).

Can I use this calculator for ethanol-water mixtures?

No. The calculator assumes pure ethanol. For mixtures, the density is different and the volume is not additive due to contraction. You would need the actual density of the mixture at your temperature.

Related

Formula used
in m | Mass of ethanol | g | 46.07 | 0
in d | Density of ethanol | g/mL | 0.789 | 0
out vm | Molar volume | mL/mol | m / d | 2
out l | Volume of sample | L | vm / 1000 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →