molecalculator

Moles & Molar Mass

Molecular Formula for Ethanol: C2H5OH Explained

Calculator No. 01-8976 · Updated · Formula and assumptions shown below

Molarity 4.0000 mol/L
Concentration in millimolar
4,000.00 mM
= Molarity × 1000
Mass of ethanol
46.07 g
Set in the form below
Molar mass
46.07 g/mol
Set in the form below
You enter
Mass of ethanol (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molecular formula for ethanol is C2H5OH (also written as C2H6O). This means each ethanol molecule contains two carbon atoms, six hydrogen atoms, and one oxygen atom. The formula tells you the exact atomic composition, but the structure—an ethyl group (C2H5) bonded to a hydroxyl group (OH)—is what gives ethanol its distinctive chemical behavior.

Formula

The molecular formula C2H5OH can be broken into two parts: the alkyl group C2H5 (ethyl) and the functional group OH (hydroxyl). The condensed structural formula is CH3CH2OH, showing that one carbon (CH3) is bonded to the other carbon (CH2), which is bonded to the oxygen of the hydroxyl group. The empirical formula—the simplest whole-number ratio of atoms—is C2H6O, which is the same as the molecular formula because 2:6:1 cannot be reduced further. The molar mass is calculated from the atomic weights: 2 × 12.011 (C) + 6 × 1.008 (H) + 1 × 15.999 (O) = 46.069 g/mol, usually rounded to 46.07 g/mol.

Worked Example

Suppose you need to prepare 250 mL of a solution by dissolving 46.07 g of ethanol (which is exactly one mole). Using the calculator above:

  1. Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
  2. Calculate moles of ethanol: 46.07 g ÷ 46.07 g/mol = 1.000 mol
  3. Calculate molarity: 1.000 mol ÷ 0.250 L = 4.000 mol/L

The calculator returns 4.0000 mol/L (or 4000.00 mM). This matches the default values: 46.07 g of solute in 250 mL gives a 4 M solution—a common stock concentration for laboratory work.

Assumptions

  • The molar mass is based on the IUPAC abridged atomic weights (H 1.008, C 12.011, O 15.999).
  • The solution is at room temperature (about 25 °C) where the density of pure ethanol is 0.789 g/mL; the calculator uses mass, not volume, so density is not needed.
  • The final volume is the total solution volume, not the volume of solvent added. When preparing a solution, you add solute first, then solvent to reach the final mark.
  • Ethanol is completely miscible with water, so no volume contraction is considered in the molarity calculation.

Why the Formula Matters

The molecular formula is the foundation for stoichiometry, molar mass, and solution preparation. Knowing that ethanol is C2H5OH lets you calculate how many grams are in a mole, how many moles are in a given volume of pure liquid (using density), and how to dilute it to a target concentration. For example, a 1 M solution of ethanol contains 46.07 g per liter. In fermentation, glucose (C6H12O6) is converted to two molecules of ethanol and two of carbon dioxide: C6H12O6 → 2 C2H5OH + 2 CO2. This balanced equation relies directly on the molecular formula.

Common Mistakes and Misconceptions

  • Confusing ethanol with methanol: Methanol is CH3OH (one carbon); ethanol has two carbons. They look similar but methanol is highly toxic, while ethanol is the type found in alcoholic beverages.
  • Writing C2H6O vs C2H5OH: Both are correct, but the latter emphasizes the hydroxyl group, which is important for reactions. The former is the condensed formula that hides the functional group.
  • Forgetting the molar mass is not 46.00: Using 46.00 instead of 46.07 introduces a 0.15% error—negligible for rough work but problematic for precise titrations or kinetic studies.
  • Assuming ethanol is a strong electrolyte: Ethanol does not dissociate into ions in water. Its solutions do not conduct electricity significantly, unlike sodium chloride. This affects colligative properties like freezing point depression.

Ethanol vs. Other Alcohols

Ethanol is one of many alcohols. The general formula for a saturated monohydric alcohol is CnH2n+1OH. For n=1, you get methanol (CH3OH); for n=2, ethanol (C2H5OH); for n=3, propanol (C3H7OH). Propanol has two isomers: 1-propanol (CH3CH2CH2OH) and 2-propanol (CH3CH(OH)CH3), also called isopropanol. The position of the hydroxyl group changes the physical properties: 2-propanol boils at 82.5 °C, while 1-propanol boils at 97 °C. Ethanol boils at 78.37 °C, lower than water (100 °C), which is why fractional distillation can concentrate it.

Practical Uses and Properties

Ethanol is a polar solvent, miscible with water and many organic solvents. Its boiling point of 78.37 °C and melting point of -114.1 °C make it a common solvent in laboratories and industry. It is used as a fuel additive (E10, E85), a disinfectant (70% solutions are more effective than 100% because water helps denature proteins), and a preservative. In the lab, ethanol is often used to rinse glassware, precipitate DNA, or prepare standards. When handling ethanol, remember it is flammable (flash point 13 °C) and should be kept away from open flames. Always follow your lab method, the safety data sheet (SDS) and your supervisor.

Frequently Asked Questions

Is ethanol the same as alcohol?

In everyday language, “alcohol” usually means ethanol (the intoxicating ingredient in drinks). Chemically, an alcohol is any molecule with a hydroxyl group attached to a carbon atom—methanol, ethanol, propanol, and many others are all alcohols. So ethanol is one specific type of alcohol.

What is the difference between C2H5OH and C2H6O?

They are the same molecule. C2H6O is the molecular formula, showing the total number of atoms. C2H5OH is the condensed structural formula, which shows the hydroxyl group explicitly. Chemists prefer the latter because it indicates the functional group that determines reactivity.

How many grams are in one mole of ethanol?

One mole of ethanol weighs 46.07 grams. This is calculated by summing the atomic weights: 2×12.011 (carbon) + 6×1.008 (hydrogen) + 15.999 (oxygen) = 46.069 g/mol. For quick mental math, many use 46 g/mol, but the precise value is 46.07.

Can I use the formula to calculate how much ethanol is in a drink?

Yes, but you need the volume and the alcohol by volume (ABV) percentage. For example, a 500 mL bottle of wine at 12% ABV contains 0.12 × 500 mL = 60 mL of pure ethanol. To get grams, multiply by the density of ethanol (0.789 g/mL): 60 mL × 0.789 g/mL = 47.3 g. That is about 1.03 moles. This calculation is useful for understanding standard drink sizes, but always drink responsibly and follow local laws.

Why is 70% ethanol a better disinfectant than 100%?

Pure ethanol evaporates too quickly and coagulates proteins on the cell surface, forming a protective layer. A 70% solution (in water) denatures proteins more slowly, allowing better penetration into cells and more effective killing of microorganisms. The water also helps dissolve the cell membrane. This is why laboratories and hospitals use 70% ethanol for surface disinfection.

Does ethanol have the same formula as dimethyl ether?

No, but they are isomers. Dimethyl ether has the formula CH3OCH3, which also has the molecular formula C2H6O. The atoms are arranged differently: ethanol has a C-C-O chain, while dimethyl ether has a C-O-C chain. They have different physical properties—dimethyl ether is a gas at room temperature (boiling point -24 °C), while ethanol is a liquid. This is a classic example of functional group isomerism.

Related

Formula used
in m | Mass of ethanol | g | 46.07 | 0
in mm | Molar mass | g/mol | 46.07 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →