molecalculator

Moles & Molar Mass

Molecular Mass of Ethanol (C2H5OH)

Calculator No. 01-8978 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molecular mass of ethanol (C2H5OH) is 46.07 g/mol, calculated from the standard atomic weights of its constituent atoms: 2 carbon (12.011 each), 6 hydrogen (1.008 each), and 1 oxygen (15.999). This value represents the mass of one mole of ethanol molecules, which is the quantity you need for converting between mass and moles in stoichiometry, solution preparation, and gas law calculations.

Formula

The molecular mass (also called molar mass) of a compound is the sum of the atomic masses of all atoms in its molecular formula, expressed in grams per mole (g/mol). For ethanol, the formula is C2H5OH, which can also be written as C2H6O. The calculation is:

M(C2H5OH) = 2 × Ar(C) + 6 × Ar(H) + 1 × Ar(O)

Where:

  • Ar(C) = 12.011 g/mol (atomic weight of carbon)
  • Ar(H) = 1.008 g/mol (atomic weight of hydrogen)
  • Ar(O) = 15.999 g/mol (atomic weight of oxygen)

Plugging in the values: 2 × 12.011 + 6 × 1.008 + 15.999 = 24.022 + 6.048 + 15.999 = 46.069 g/mol, which rounds to 46.07 g/mol.

Worked Example

Suppose you need to prepare 250 mL of a 0.200 M ethanol solution in water. Using the molar mass of ethanol (46.07 g/mol), calculate the mass of ethanol required.

First, convert the volume to liters: 250 mL × (1 L / 1000 mL) = 0.250 L.

Then use the molarity formula: moles = molarity × volume = 0.200 mol/L × 0.250 L = 0.0500 mol.

Finally, convert moles to mass: mass = moles × molar mass = 0.0500 mol × 46.07 g/mol = 2.3035 g, which rounds to 2.30 g.

Note: the calculator above uses sodium chloride (NaCl, molar mass 58.44 g/mol) as a generic example for solution prep, but you can replace the molar mass input with 46.07 g/mol for ethanol. The formula works for any solute.

Assumptions

  • Atomic weights are the IUPAC abridged standard values (H 1.008, C 12.011, O 15.999).
  • The molecular formula is C2H5OH (or C2H6O), not the hydrated or isotopic form.
  • For solution calculations, the final volume is used, not the solvent volume, and the solution is assumed to be at room temperature (density effects are ignored).

Why the Molecular Mass Matters

The molecular mass of ethanol is a fundamental constant used in countless laboratory and industrial calculations. It allows chemists to convert between the mass of ethanol and the number of moles, which is essential for stoichiometric reactions, preparing solutions of known concentration, and determining gas densities or partial pressures. For example, in fermentation, knowing that glucose (C6H12O6, molar mass 180.16 g/mol) produces two molecules of ethanol (2 × 46.07 = 92.14 g/mol) and two molecules of CO2 (2 × 44.01 = 88.02 g/mol) lets you predict the mass of ethanol produced from a given sugar mass.

How to Calculate It Yourself

If you don’t have the molar mass memorized, you can calculate it from the periodic table in three steps:

  1. Write the molecular formula: C2H5OH (or C2H6O). Count the atoms: 2 C, 6 H, 1 O.
  2. Look up the atomic weight of each element (use the standard values: C = 12.011, H = 1.008, O = 15.999).
  3. Multiply each atomic weight by the number of atoms and sum: (2 × 12.011) + (6 × 1.008) + (1 × 15.999) = 46.07 g/mol.

Be careful not to confuse molecular mass with molar mass—they are numerically identical in g/mol, but molecular mass is often expressed in atomic mass units (u) when referring to a single molecule. One molecule of ethanol has a mass of 46.07 u, and one mole has a mass of 46.07 g.

Common Mistakes and Misconceptions

A frequent error is using the empirical formula (C2H6O) but forgetting that the molecular formula is the same for ethanol—there is no simplification. Another mistake is miscounting hydrogen atoms: ethanol has 6 hydrogens, not 5, because the hydroxyl group (–OH) contributes one hydrogen. Also, students sometimes use the atomic mass of oxygen as 16.00 instead of 15.999, which changes the result by 0.001 g/mol—negligible for most work but important for high-precision calculations.

Another misconception is that the molecular mass of ethanol in solution is different because of hydrogen bonding. In reality, the molar mass is an intrinsic property of the molecule; hydrogen bonding affects physical properties like boiling point, not the mass. For dilute solutions, the molar mass remains 46.07 g/mol.

How to Use the Molecular Mass in the Lab

In the laboratory, the molecular mass of ethanol is used for:

  • Preparing molar solutions: weigh the calculated mass of ethanol and dilute to the final volume.
  • Stoichiometric calculations in reactions where ethanol is a reactant or product (e.g., esterification, oxidation to acetaldehyde).
  • Gas law calculations: if ethanol vapor behaves ideally, you can use PV = nRT with n = mass / 46.07.
  • Determining the concentration of ethanol in a sample via density or refractive index, where the molar mass connects measured properties to moles.

Always follow your lab method, the safety data sheet (SDS) and your supervisor when handling ethanol, as it is flammable and volatile.

Frequently Asked Questions

Is the molecular mass of ethanol exactly 46.07 g/mol? It is 46.069 g/mol when using IUPAC standard atomic weights, so 46.07 is the commonly used rounded value. For precise work, use 46.069 or the exact atomic weights from your periodic table.

What is the difference between molecular mass and molar mass? Molecular mass refers to the mass of a single molecule (in atomic mass units, u), while molar mass is the mass of one mole of molecules (in g/mol). They are numerically identical, so 46.07 u = 46.07 g/mol.

How many moles are in 100 g of ethanol? Divide the mass by the molar mass: 100 g / 46.07 g/mol = 2.171 mol. Conversely, 1 mole of ethanol weighs 46.07 g.

Does the molecular mass of ethanol change with temperature or pressure? No, the molecular mass is a constant property of the molecule. Temperature and pressure affect the volume and density of ethanol, but not the mass of a fixed number of molecules.

Why is ethanol’s molecular mass higher than water’s? Water (H2O) has a molar mass of 18.015 g/mol. Ethanol has two carbons and two extra hydrogens, adding about 28 g/mol, so it is about 2.5 times heavier per molecule. This affects its vapor density and diffusion rates.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →