molecalculator

Moles & Molar Mass

Molecular Mass of Glucose (C6H12O6)

Calculator No. 01-10208 · Updated · Formula and assumptions shown below

Moles of glucose 0.1000 mol
Number of glucose molecules
6.022 × 1022
Result, rounded to 3 decimal places
Mass of glucose
18.0156 g
Set in the form below
Molar mass of glucose
180.156 g/mol
Set in the form below
You enter
Mass of glucose (g), Molar mass of glucose (g/mol)
You get
Moles of glucose (mol), Number of glucose molecules
Rounding
4 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molecular mass of glucose (C6H12O6) is 180.156 g/mol. This value is the sum of the atomic masses of 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms, using the IUPAC standard atomic weights. The molecular mass is numerically identical to the molar mass, so one mole of glucose weighs 180.156 grams.

Formula

The molecular mass (also called molecular weight) is the sum of the atomic masses of all atoms in a molecule. For glucose, C6H12O6:

Molecular mass = (6 × atomic mass of C) + (12 × atomic mass of H) + (6 × atomic mass of O)

Using IUPAC abridged atomic weights:

  • Carbon (C): 12.011 g/mol
  • Hydrogen (H): 1.008 g/mol
  • Oxygen (O): 15.999 g/mol

So the calculation is:

(6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol

In the calculator above, you enter the mass of glucose in grams and the molar mass (default 180.156 g/mol). The first output gives the number of moles; the second gives the number of molecules using Avogadro’s constant (6.02214076 × 1023 mol−1).

Worked Example

Using the default values from the calculator: 18.0156 g of glucose (about 0.1 mol) and a molar mass of 180.156 g/mol.

Step 1: Write the formula: moles = mass / molar mass.

Step 2: Plug in the numbers:

moles = 18.0156 g / 180.156 g/mol = 0.10000 mol (rounded to 4 decimal places).

Step 3: Multiply by Avogadro’s number to get molecules:

0.10000 mol × 6.02214076 × 1023 mol−1 = 6.022 × 1022 molecules.

So 18.0156 g of glucose contains exactly 0.10000 mol, which is 6.022 × 1022 molecules. This matches the calculator’s output.

Assumptions

  • The atomic weights are the IUPAC abridged standard values (H 1.008, C 12.011, O 15.999).
  • The molecular mass is calculated for the neutral, uncharged molecule.
  • Isotopic composition is the natural terrestrial abundance; no specific isotopes are considered.
  • The molar mass is numerically equal to the molecular mass expressed in g/mol.

Why the Molecular Mass Matters

The molecular mass of glucose is a fundamental constant used in countless chemistry and biology calculations. It converts between mass and moles, which is essential for preparing solutions, calculating concentrations, and understanding stoichiometry in reactions like cellular respiration:

C6H12O6 + 6 O2 → 6 CO2 + 6 H2O + energy

For example, if you need 0.5 M glucose solution for an experiment, you would weigh 90.078 g (0.5 mol × 180.156 g/mol) and dissolve it in water to a final volume of 1 L. Without the molecular mass, you cannot make accurate solutions.

Common Mistakes and Misconceptions

  • Confusing molecular mass with molar mass: They are numerically identical for a molecule; molecular mass is in atomic mass units (u) and molar mass in g/mol. For glucose, 180.156 u = 180.156 g/mol.
  • Using rounded atomic weights: Some textbooks use C = 12, H = 1, O = 16, giving 180.0 g/mol. That is an approximation; the precise IUPAC value is 180.156 g/mol. The difference matters in high-precision work.
  • Forgetting to multiply each element by its subscript: Glucose has 6 carbons, not 1. A common error is 12 + 1 + 16 = 29, which is wrong.
  • Using the mass of a glucose molecule in grams: The mass of one molecule is 180.156 u, which equals 2.99 × 10−22 g. The molar mass is the mass of one mole (6.022 × 1023 molecules), which is 180.156 g.

Glucose vs. Other Sugars

Glucose is a monosaccharide with the formula C6H12O6. Its isomers—fructose and galactose—have the same molecular formula and therefore the same molecular mass (180.156 g/mol). However, their structural formulas differ, which affects their chemical properties and how the body metabolizes them.

Disaccharides like sucrose (table sugar) have the formula C12H22O11 and a molecular mass of 342.30 g/mol. Sucrose is a combination of glucose and fructose minus a water molecule. This is why a mole of sucrose weighs almost twice as much as a mole of glucose.

How to Measure Glucose in the Lab

To use the molecular mass in practice, you typically weigh solid glucose and dissolve it in a solvent. The key steps are:

  1. Calculate the required mass using the desired molarity and volume.
  2. Weigh the glucose accurately on an analytical balance.
  3. Dissolve in a beaker with less than the final volume of solvent.
  4. Transfer to a volumetric flask and add solvent to the mark.

Always follow your lab method, the safety data sheet (SDS) and your supervisor. Glucose is generally safe, but standard lab hygiene applies.

Frequently Asked Questions

What is the difference between molecular mass and molar mass?

Molecular mass is the mass of a single molecule in atomic mass units (u), while molar mass is the mass of one mole of that substance in grams per mole (g/mol). For any molecule, the numerical values are the same: glucose has a molecular mass of 180.156 u and a molar mass of 180.156 g/mol.

Why is the molecular mass of glucose sometimes given as 180.16 instead of 180.156?

That is just rounding. The IUPAC atomic weights have more digits, and many textbooks round the final value to two decimal places (180.16 g/mol) or even one (180.2 g/mol). For most lab work, 180.16 is sufficient; for precise stoichiometry, use 180.156.

How many atoms are in one molecule of glucose?

Glucose has 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms, for a total of 24 atoms per molecule. In one mole of glucose, there are 24 × 6.022 × 1023 ≈ 1.445 × 1025 atoms.

Does the molecular mass of glucose change in water?

No. The molecular mass is a property of the molecule itself. When glucose dissolves in water, it stays as C6H12O6 (mostly in a cyclic form), so its molecular mass remains 180.156 g/mol. The solution’s concentration is calculated using this value.

How do I calculate the number of glucose molecules in a given mass?

Divide the mass by the molar mass to get moles, then multiply by Avogadro’s number (6.022 × 1023). For example, 5 g of glucose is 5 / 180.156 = 0.02775 mol, which is 0.02775 × 6.022 × 1023 ≈ 1.67 × 1022 molecules.

Is glucose the same as dextrose?

Yes. Dextrose is the common name for D-glucose, the naturally occurring form. The molecular formula and mass are identical. In medical and food contexts, “dextrose” usually refers to the pure monosaccharide, while “glucose” can also refer to the same molecule in biological contexts.

Related

Formula used
in m | Mass of glucose | g | 18.0156 | 0
in mm | Molar mass of glucose | g/mol | 180.156 | 0.001
out n | Moles of glucose | mol | m / mm | 4
out molecules | Number of glucose molecules | - | n * 6.02214076e23 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →