The molecular mass of glucose (C6H12O6) is 180.156 amu (atomic mass units), also commonly rounded to 180.16 amu or simply 180 amu. This value is the sum of the atomic masses of six carbon atoms, twelve hydrogen atoms, and six oxygen atoms, using the IUPAC standard atomic weights.
Formula
The molecular mass (M) of a compound is calculated by summing the atomic masses of each element multiplied by the number of atoms of that element in the molecular formula:
M = (6 × atomic mass of C) + (12 × atomic mass of H) + (6 × atomic mass of O)
Using IUPAC standard atomic weights:
- Carbon (C): 12.011 amu
- Hydrogen (H): 1.008 amu
- Oxygen (O): 15.999 amu
Therefore: M = (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 amu.
In the calculator above, the molar mass input defaults to 180.156 g/mol, which is numerically identical to the molecular mass in amu. The calculator computes the molarity of a solution when you enter the mass of glucose and the final volume.
Worked Example
Suppose you dissolve 2.922 g of glucose in enough water to make 250 mL of solution. What is the molarity?
Step 1: Identify the molar mass of glucose: 180.156 g/mol.
Step 2: Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L.
Step 3: Calculate moles of glucose: moles = mass / molar mass = 2.922 g / 180.156 g/mol = 0.01622 mol (approximately).
Step 4: Calculate molarity: M = moles / volume (L) = 0.01622 mol / 0.250 L = 0.06488 mol/L.
The calculator gives 0.0649 mol/L (rounded to 4 decimal places) and 64.88 mM (rounded to 2 decimal places). This matches the manual calculation.
Assumptions
- The atomic weights used are the IUPAC standard abridged values, which are averages of natural isotopic abundances.
- The molecular mass is for the most common form of glucose (D-glucose), which has the formula C6H12O6.
- In the molarity calculation, the final volume is used (not the volume of solvent added), assuming the solute dissolves without significant volume change.
- The solution is assumed to be dilute and at room temperature, where density effects are negligible.
Why the Molecular Mass Matters
The molecular mass of glucose is a fundamental constant used in countless laboratory calculations. It bridges the microscopic world of molecules and the macroscopic world of grams and liters. When you weigh out glucose on a balance, you are actually counting molecules: 180.156 grams of glucose contains exactly one mole (6.022 × 1023 molecules). This relationship allows chemists to prepare solutions of known concentration, which is essential for reactions, buffers, culture media, and many analytical techniques.
For example, a 1 M glucose solution is made by dissolving 180.156 g of glucose in water and diluting to a final volume of 1 liter. If you need 500 mL of a 0.5 M solution, you would use 45.039 g of glucose (0.5 × 180.156 × 0.5).
How to Calculate It Yourself
To find the molecular mass of any compound, follow these steps:
- Write the molecular formula (e.g., C6H12O6).
- Look up the atomic mass of each element from a periodic table (use IUPAC standard weights for consistency).
- Multiply each atomic mass by the number of atoms of that element in the formula.
- Add all the products together.
For glucose, the calculation is straightforward because the formula is simple. For larger molecules like proteins, you would sum the atomic masses of all amino acids, but the principle is the same.
Common Mistakes and Misconceptions
One common mistake is confusing molecular mass with molar mass. In practice, they are numerically identical: the molecular mass in amu equals the molar mass in g/mol. However, the units are different (amu vs. g/mol), and the context matters. In the lab, you always use g/mol.
Another error is using outdated or rounded atomic weights. For example, using 12.0 for carbon instead of 12.011 gives 180.0 amu, which is close but not precise. For high-accuracy work, use the standard weights.
Some students mistakenly add the atomic masses without multiplying by the number of atoms. For glucose, forgetting to multiply carbon by 6 would give a value around 28 amu, which is clearly wrong.
Finally, note that glucose exists as different isomers (e.g., D-glucose and L-glucose), but they all have the same molecular formula and thus the same molecular mass.
Comparing Glucose to Other Sugars
Glucose is a monosaccharide with 6 carbons. Other common sugars have different molecular masses:
- Fructose (C6H12O6): also 180.156 amu, because it is an isomer of glucose.
- Sucrose (C12H22O11): 342.296 amu (table sugar).
- Lactose (C12H22O11): also 342.296 amu.
- Maltose (C12H22O11): also 342.296 amu.
Interestingly, glucose and fructose are isomers, so they have the same molecular mass but different structures. Sucrose is a disaccharide of glucose and fructose, so its mass is the sum of the two monosaccharides minus a water molecule (180.156 + 180.156 − 18.015 = 342.297 amu).
Practical Uses of Glucose Molar Mass
In biological and medical laboratories, glucose molar mass is used to prepare solutions for:
- Cell culture media (e.g., DMEM contains glucose at a specific concentration).
- Glucose tolerance tests (often a 75 g dose for adults).
- Calibration of glucose meters and analytical instruments.
- Studying enzyme kinetics (e.g., hexokinase assays).
For instance, to prepare 1 liter of a 5% (w/v) glucose solution, you would dissolve 50 g of glucose in water and bring the total volume to 1 L. The molarity of that solution is 50 g / 180.156 g/mol = 0.2775 M.
Frequently Asked Questions
Is the molecular mass of glucose exactly 180 amu?
No, it is 180.156 amu using standard atomic weights. The value 180 amu is a rounded approximation often used for quick calculations. For precise work, use 180.156 g/mol.
What is the difference between molecular mass and molar mass?
Molecular mass is the mass of a single molecule in atomic mass units (amu). Molar mass is the mass of one mole of molecules in grams per mole (g/mol). Numerically they are the same, but the units differ. For glucose, both are 180.156.
How many moles are in 1 gram of glucose?
One gram of glucose divided by 180.156 g/mol gives approximately 0.00555 moles. This is about 3.34 × 1021 molecules.
Why do some sources say glucose has a molecular weight of 180.16?
That is simply a rounding of 180.156 to two decimal places. Different periodic tables may use slightly different atomic weights (e.g., carbon as 12.01 instead of 12.011), which can alter the final digit. The IUPAC standard gives 180.156.
Does the molecular mass of glucose change if it is in water?
No, the molecular mass is a property of the molecule itself and does not change with environment. In water, glucose may form hydrogen bonds or exist in different conformations, but the molecular mass remains 180.156 amu.
Can I use the same molar mass for glucose monohydrate?
No. Glucose monohydrate (C6H12O6·H2O) includes an extra water molecule, so its molar mass is 180.156 + 18.015 = 198.171 g/mol. Always check the chemical formula of the substance you are weighing.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 180.156 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP