molecalculator

Moles & Molar Mass

Nitric Acid Molecular Mass and Molar Mass Calculator

Calculator No. 01-3640 · Updated · Formula and assumptions shown below

Molecular mass of HNO3 63.012 u (g/mol)
Hydrogen atoms
1
Set in the form below
Nitrogen atoms
1
Set in the form below
Oxygen atoms
3
Set in the form below
You enter
Hydrogen atoms, Nitrogen atoms, Oxygen atoms
You get
Molecular mass of HNO3 (u (g/mol))
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molecular mass of nitric acid, HNO3, is about 63.012 atomic mass units (u); its molar mass is about 63.012 g/mol. Enter the atom counts in the calculator to find the formula mass, with the same numerical value expressed in u per molecule or g/mol per mole.

Formula

For a chemical formula, multiply the number of each type of atom by its standard atomic weight, then add the contributions. For nitric acid:

Molecular mass = (1 × 1.008 u) + (1 × 14.007 u) + (3 × 15.999 u) = 63.012 u.

Equivalently, M = h(1.008) + n(14.007) + o(15.999), where M is the formula mass in u, and h, n, and o are the counts of hydrogen, nitrogen, and oxygen atoms. The atomic weights used are the IUPAC abridged standard values: H = 1.008, N = 14.007, and O = 15.999. For this calculator the atom counts are fixed to the nitric acid formula, HNO3.

A molecule’s mass in u and the molar mass in g/mol have the same numerical value for a specified substance. Thus 63.012 u per HNO3 molecule corresponds to 63.012 g of HNO3 per mole. The units describe different scales; they are not interchangeable.

Worked Example

Using the calculator’s default atom counts, h = 1, n = 1, and o = 3:

  1. Hydrogen contribution: 1 × 1.008 = 1.008 u.
  2. Nitrogen contribution: 1 × 14.007 = 14.007 u.
  3. Oxygen contribution: 3 × 15.999 = 47.997 u.
  4. Add the contributions: 1.008 + 14.007 + 47.997 = 63.012 u, or 63.012 g/mol as molar mass.

The result is the formula mass calculated from the specified atomic-weight values. Different tables may show a slightly different final digit because atomic weights are reported with limited precision and may reflect different conventions.

Assumptions

  • The formula is molecular nitric acid, HNO3, with one H, one N, and three O atoms.
  • The calculation uses the stated abridged standard atomic weights; it is not an isotope-specific mass calculation.
  • The calculator reports a formula mass in u and the corresponding molar mass in g/mol. It does not calculate a solution’s concentration, purity, or density.

What the Number Means

Molecular mass describes the mass of one molecule relative to the unified atomic mass unit, defined as one twelfth of the mass of a carbon-12 atom. For nitric acid, the calculated value is approximately 63.012 u. Since an individual molecule is extremely small, chemistry problems more often use the molar mass: one mole of HNO3 has a mass of approximately 63.012 g under this convention.

The mole links the microscopic particle count to measurable quantities. One mole contains exactly 6.02214076 × 1023 specified entities. For a pure sample, dividing its mass in grams by 63.012 g/mol gives the amount of nitric acid in moles. Conversely, multiplying a number of moles by 63.012 g/mol gives the corresponding mass in grams.

For example, the arithmetic for a 10.000 g pure sample is 10.000 g ÷ 63.012 g/mol ≈ 0.15870 mol. This is a mass-to-amount conversion only; it does not tell you the volume or concentration of a nitric acid solution.

Molecular Mass, Molar Mass, and Formula Mass

These terms are related, but refer to quantities at different scales. Molecular mass is the mass of an individual molecule, conventionally expressed in u. Molar mass is the mass per mole, expressed in g/mol. Formula mass is often used for the sum of atomic masses in a chemical formula, especially when the substance is not made of discrete molecules, such as an ionic solid.

Nitric acid exists as HNO3 molecules, so “molecular mass” is appropriate. In many classroom calculations, “molecular weight” is used informally to mean the same numerical result, although weight technically refers to a force and mass to an amount of matter. When reporting a calculation, including the unit makes the intended meaning clear.

Do not confuse molecular mass with the mass of a bottle, sample, or solution. A sample’s mass depends on how much material is present. Molecular or molar mass is a property calculated from composition and atomic weights, independent of sample size.

Why Nitric Acid Is Written HNO3

Nitric acid is an inorganic acid whose formula contains one hydrogen atom, one nitrogen atom, and three oxygen atoms. The subscripts state the atom counts: no written subscript after H or N means one atom, while the subscript 3 after O means three. The atom counts, rather than the order in which elements appear, determine the mass calculation.

In water, nitric acid is commonly treated as a strong acid that ionizes extensively. That behavior matters when discussing solution chemistry, but it does not change the formula mass of an HNO3 molecule. If a calculation concerns ions in a solution, the species and reaction being counted must be specified separately; the molecular-mass calculation itself remains based on the neutral formula HNO3.

Common Calculation Errors and Limits

  • Forgetting the oxygen subscript: HNO3 has three oxygen atoms, so oxygen contributes 3 × 15.999 = 47.997 u, not 15.999 u.
  • Using an atomic weight as the whole molecular mass: 14.007 is nitrogen’s contribution for one atom, not the mass of nitric acid.
  • Mixing units: report the molecule-scale value in u and the per-mole value in g/mol. Their numerical values match, but the quantities and units differ.
  • Rounding too early: keep the atomic-weight values through the sum and round the final result to the precision appropriate for the task. The calculator displays 63.012.
  • Assuming this is the mass of a solution: a solution includes solvent and may have a stated concentration or purity. Molecular mass alone cannot determine the amount of nitric acid in a particular volume.

This simple sum gives a conventional average formula mass based on standard atomic weights. A sample made with particular isotopes can have a different exact isotopic mass. In ordinary stoichiometry, the standard molar mass is the useful value; isotope-specific work requires the isotope composition and corresponding isotope masses.

Frequently Asked Questions

What is the molecular mass of HNO3?
The molecular mass is approximately 63.012 u, calculated from one hydrogen, one nitrogen, and three oxygen atoms.

What is the molar mass of nitric acid?
Using the stated standard atomic weights, the molar mass is approximately 63.012 g/mol.

How do you calculate the mass of nitric acid?
Add the atomic contributions: 1 × 1.008 for H, 1 × 14.007 for N, and 3 × 15.999 for O. The total is 63.012.

Is molecular mass the same as molar mass?
No. Molecular mass is expressed in u per molecule, while molar mass is expressed in g/mol. For the same substance, their numerical values are equal when these units are used.

Does nitric acid’s concentration change its molecular mass?
No. Concentration describes how much nitric acid is present in a solution; molecular mass comes from the HNO3 formula. Concentration is needed for solution calculations, not for finding the molecular mass.

Related

Formula used
in h | Hydrogen atoms | - | 1 | 0 | 1
in n | Nitrogen atoms | - | 1 | 0 | 1
in o | Oxygen atoms | - | 3 | 0 | 3
out mm | Molecular mass of HNO3 | u (g/mol) | h * 1.008 + n * 14.007 + o * 15.999 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →