Oxygen melts at about −218.79 °C (54.36 K) at standard atmospheric pressure, 1 atm. This page’s calculator converts a temperature in degrees Celsius to kelvins, so you can compare the melting point with other temperatures on the absolute scale.
Formula
The conversion is T(K) = t(°C) + 273.15. Here, t is temperature in degrees Celsius and T is temperature in kelvins. The offset 273.15 is exact by definition. The calculator accepts temperatures from −273.15 °C upward, because temperatures below absolute zero are not valid on the Celsius scale.
Worked Example
Using the calculator’s default temperature:
- Input: t = −218.79 °C.
- Convert: T = −218.79 + 273.15 = 54.36 K.
Thus, the reported melting temperature is 54.36 K, equivalent to −218.79 °C at the stated pressure.
Assumptions
- The temperature is the approximate oxygen melting point at a pressure of 1 atm.
- The Celsius-to-kelvin conversion is exact; the quoted phase-change temperature is rounded.
- This calculator converts temperature only. It does not predict a phase boundary at other pressures.
What Oxygen’s Melting Temperature Means
Melting is the transition from a solid to a liquid. For a pure substance at a specified pressure, the melting point is the temperature at which solid and liquid phases can coexist in equilibrium. Oxygen’s commonly quoted melting point is approximately 54.36 K, which is −218.79 °C or about −361.82 °F, at one atmosphere.
That pressure qualification matters: a melting temperature is not a universal number independent of conditions. Changing pressure can shift the temperature at which solid and liquid oxygen are in equilibrium. Reference values can also differ slightly because of rounding, measurement conventions, and the pressure specified. When precision matters, state both the temperature and pressure rather than reporting a bare number.
Kelvin is especially useful in low-temperature science because it starts at absolute zero. Celsius and kelvin have the same-sized degree; only their zero points differ. A change of 1 K is therefore the same temperature interval as a change of 1 °C, but an absolute temperature of 54.36 K corresponds to −218.79 °C.
How Oxygen Changes Phase
At ordinary room conditions, oxygen is a gas. Cooling it at suitable pressure eventually produces liquid oxygen, and further cooling solidifies that liquid. At 1 atm, oxygen boils at roughly 90.2 K (−183.0 °C) and melts at roughly 54.36 K. These are distinct transitions: boiling converts liquid to gas, while melting converts solid to liquid.
Between its melting and boiling points at that pressure, oxygen is liquid. Below its melting point it is solid, and above its boiling point it is gaseous, with the usual caveat that exact boundaries depend on pressure and equilibrium conditions. These temperatures describe phase changes, not temperatures at which oxygen becomes chemically different. The molecule remains O2 through ordinary freezing and melting.
At the transition itself, added or removed heat can change the proportions of solid and liquid without immediately changing the temperature. The energy involved in changing phase is called latent heat. This is why a phase-change temperature should not be understood as a simple point at which a substance instantaneously switches in every circumstance.
Why Pressure and Purity Matter
Temperature and pressure together determine which phase is stable. A phase diagram represents these conditions and shows boundaries between solid, liquid, and gas. The quoted 54.36 K value is for a particular pressure; it should not be used as an exact melting point for oxygen under high pressure. At pressures far from 1 atm, consult reliable phase-equilibrium data for the conditions in question.
Purity also affects practical measurements. A sample containing other substances may freeze or melt over a range rather than at the equilibrium temperature of pure oxygen. Instruments have finite precision, and thermal gradients can mean the sample is not all at one temperature. Consequently, a published reference value and a measured sample’s observed transition need not match to every reported digit.
Common Confusions and Useful Comparisons
- Melting versus boiling: Oxygen melts near 54.36 K and boils near 90.2 K at 1 atm. The lower value marks solid-to-liquid change; the higher marks liquid-to-gas change.
- Negative Celsius does not mean negative absolute temperature: −218.79 °C is 54.36 K, well above absolute zero.
- Kelvin has no degree sign: Write 54.36 K, not 54.36 °K. Celsius is written −218.79 °C.
- A quoted value needs pressure: “Oxygen melts at 54.36 K” is useful shorthand, but “at about 1 atm” makes the conditions clear.
For scale, water freezes at 273.15 K at approximately 1 atm, while oxygen melts at just over 54 K. The enormous difference reflects the distinct intermolecular behavior of the substances; it does not mean oxygen’s melting point can be inferred from its room-temperature gas state alone.
Safety and Scope
The melting point is a reference property, not a practical instruction for handling oxygen. Cryogenic oxygen can cause severe cold-contact injuries, and liquid oxygen greatly intensifies combustion. Materials that are not readily combustible in air may burn vigorously in oxygen-rich conditions; oils, greases, and other contaminants can create especially serious hazards. Oxygen should be handled only with appropriate training, equipment, and controls. Never use a household freezer or improvised cooling setup to try to reach this temperature.
The calculator above performs only a temperature-scale conversion. It does not assess equipment, safe operating conditions, or oxygen-system compatibility. For real cryogenic work, follow applicable institutional procedures and authoritative safety guidance.
Frequently Asked Questions
What is the melting point of oxygen in Celsius?
It is approximately −218.79 °C at 1 atm.
What is oxygen’s melting point in kelvins?
It is about 54.36 K at 1 atm. Kelvin is obtained from Celsius by adding 273.15.
Does oxygen melt at the same temperature at every pressure?
No. The solid–liquid equilibrium temperature depends on pressure. The commonly cited value applies approximately to 1 atm.
Is oxygen liquid at its melting point?
At the melting point, solid and liquid oxygen can coexist in equilibrium. At 1 atm, oxygen is liquid between its melting point near 54.36 K and its boiling point near 90.2 K.
Why is oxygen’s melting point so low?
Oxygen molecules attract one another relatively weakly compared with the interactions in many substances, so solid oxygen becomes stable only at very low temperatures under ordinary pressure.
Related
Formula used
in tc | Temperature in Celsius | °C | -218.79 | -273.15 out tk | Temperature in kelvins | K | tc + 273.15 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Isotope Percent Abundance Calculator and How to Use It75.91 %
- Percentage Abundance Calculator and How to Find It
- Isotope Fractional Abundance Calculator and Formula0.2409 fraction
- Percent Abundance Formula: Calculate Isotope Percentages25.00 %
- Isotope Percent Abundance Calculator and How to Use It50.00 %
- Isotope Percent Abundance Calculator and How-To Guide75.91 %