Ethanol (C2H6O) is a two-carbon alcohol whose molecular structure is CH3–CH2–OH: a methyl group (CH3) bonded to a methylene group (CH2), which is in turn bonded to a hydroxyl group (–OH). The molecule has a molecular weight of 46.07 g/mol and adopts a bent geometry around the oxygen atom, with a C–C–O bond angle of about 109.5°.
Formula
The molecular formula C2H6O tells you the atom count, but the structural formula CH3CH2OH tells you how they connect. The condensed formula is often written as C2H5OH, which emphasizes the ethyl group (C2H5) attached to the hydroxyl group. The molar mass is calculated from standard atomic weights: 2 × 12.011 (C) + 6 × 1.008 (H) + 1 × 15.999 (O) = 46.069 g/mol, usually rounded to 46.07 g/mol.
For solution calculations, the molarity formula is:
Molarity (mol/L) = (mass of solute in g / molar mass in g/mol) / (volume in L)
where volume in L = volume in mL / 1000. The calculator above uses this directly, with the default mass set to 46.07 g (exactly one mole) and volume to 1000 mL, giving 1.0000 mol/L.
Worked Example
Suppose you dissolve 46.07 g of ethanol (the default mass) in enough water to make 1000 mL of solution. The molar mass is 46.07 g/mol.
- Convert volume to liters: 1000 mL ÷ 1000 = 1.000 L.
- Convert mass to moles: 46.07 g ÷ 46.07 g/mol = 1.000 mol.
- Divide moles by volume: 1.000 mol ÷ 1.000 L = 1.0000 mol/L.
The calculator returns 1.0000 mol/L, and in millimolar that is 1000.00 mM (since 1 mol/L = 1000 mM).
Assumptions
- The solution is at room temperature (25 °C) and dilute enough that volume additivity holds.
- Ethanol is a pure liquid reagent (density 0.789 g/mL at 25 °C) when measuring by mass.
- The final volume is the total solution volume after mixing, not the volume of solvent added.
- No chemical reaction occurs; ethanol remains as intact molecules in water.
Structural Details and Bonding
Ethanol’s structure is best understood by looking at each bond. The carbon atoms are sp3 hybridized, meaning each carbon forms four single bonds arranged roughly tetrahedrally. The C–C bond is a sigma bond (153 pm), the C–H bonds are sigma bonds (110 pm), and the C–O bond is a sigma bond (143 pm). The O–H bond is polar covalent (96 pm).
The oxygen atom has two lone pairs of electrons, making the C–O–H bond angle about 104.5° (slightly less than the ideal 109.5° due to lone-pair repulsion). The entire molecule is polar because the C–O and O–H bonds have significant electronegativity differences (C: 2.55, O: 3.44, H: 2.20). This polarity gives ethanol a dipole moment of about 1.69 debye.
The hydroxyl group is the functional group that makes ethanol an alcohol. It allows hydrogen bonding between ethanol molecules and with water, which explains why ethanol is infinitely miscible with water and has a higher boiling point (78.4 °C) than alkanes of similar molar mass (propane, 42 °C).
Isomers and Related Structures
Ethanol has one constitutional isomer with the same molecular formula C2H6O: dimethyl ether (CH3–O–CH3). In dimethyl ether, the oxygen is between two methyl groups, not attached to a hydrogen. This small difference changes the physical properties dramatically: dimethyl ether is a gas at room temperature (boiling point −24 °C) because it cannot hydrogen bond as a donor.
Ethanol is the second simplest alcohol after methanol (CH3OH). It is the active ingredient in alcoholic beverages, produced by fermentation of sugars by yeast. The fermentation reaction is: C6H12O6 → 2 C2H5OH + 2 CO2.
How to Read the Structure in Different Notations
Chemists use several ways to write ethanol’s structure, and it helps to recognize them:
- Molecular formula: C2H6O – shows atom count only.
- Condensed formula: CH3CH2OH – shows connectivity.
- Line-angle (skeletal) formula: a zigzag line with an –OH at the end; each vertex is a carbon, and hydrogens are implied.
- Lewis structure: shows all bonds and lone pairs, such as H–C–C–O–H with H atoms around each carbon.
- 3D representation: shows the tetrahedral geometry around carbons and the bent shape at oxygen.
When reading a line-angle formula, remember that carbon atoms are at the ends of lines and at vertices, and each carbon must have four bonds. In ethanol, the left carbon (CH3) has three hydrogens, the middle carbon (CH2) has two hydrogens, and the oxygen has one hydrogen.
Common Mistakes and Misconceptions
A frequent error is confusing ethanol with methanol (CH3OH) or isopropanol (C3H8O). Methanol is toxic and can cause blindness; ethanol is the type found in alcoholic drinks. Another mistake is writing the formula as C2H5OH and thinking it is a different compound – it is the same molecule, just a condensed notation.
When calculating molarity, a common unit error is forgetting to convert mL to L. For example, 100 mL is 0.100 L, not 100 L. Also, when measuring ethanol by volume (e.g., 100 mL of 95% ethanol), the mass depends on density (0.789 g/mL for pure ethanol), so always use mass for molar calculations unless the density is given.
Another misconception is that ethanol’s –OH group makes it a base like sodium hydroxide. It is a very weak acid (pKa ≈ 16), but it does not dissociate significantly in water. In solution, ethanol molecules remain intact, which is why the molarity calculation treats it as a non-electrolyte.
Practical Uses and Context
Ethanol’s structure determines its uses. The hydroxyl group makes it a good solvent for polar and nonpolar compounds, so it is used in tinctures, perfumes, and cleaning products. Its ability to mix with water makes it useful as a fuel additive (E10, E85) and as a disinfectant (60–90% solutions denature proteins).
In the lab, ethanol is often used to prepare solutions of known concentration. For example, a 70% (v/v) ethanol solution is common as a disinfectant. To make 500 mL of 70% ethanol from 95% stock, you calculate: (70% × 500 mL) / 95% = 368.4 mL of stock, then dilute to 500 mL with water. The calculator above works for molarity, but for percent solutions you use a different formula.
For molar solutions, you might need to make 0.5 M ethanol in water. Using the formula: mass = molarity × molar mass × volume (L). For 250 mL (0.250 L): 0.5 mol/L × 46.07 g/mol × 0.250 L = 5.76 g. Dissolve that in water and bring the total volume to 250 mL. Always add solute to a volumetric flask and then fill to the mark, not the other way around.
Safety and Handling
Ethanol is flammable and should be kept away from open flames and sparks. It is also a central nervous system depressant; ingestion of large amounts causes intoxication and can be fatal. In the lab, follow your institution’s safety data sheet (SDS) and your supervisor’s instructions. When preparing solutions, wear safety goggles and gloves, and work in a well-ventilated area. If you spill ethanol, clean it up quickly because it evaporates and can create a fire hazard.
For disinfectant use, ethanol concentrations below 60% are less effective, and above 90% may evaporate too quickly to denature proteins. The recommended range is 60–90% v/v. Never drink laboratory ethanol; it may contain denaturants that are toxic.
Frequently Asked Questions
What is the difference between ethanol and ethyl alcohol?
They are the same compound. “Ethanol” is the systematic IUPAC name, while “ethyl alcohol” is a common name. Both refer to CH3CH2OH. The term “grain alcohol” also refers to ethanol, but often implies it is produced by fermentation of grains.
Why is ethanol soluble in water?
Ethanol’s hydroxyl group (–OH) can form hydrogen bonds with water molecules. The oxygen atom has lone pairs that accept hydrogen bonds, and the hydrogen on the –OH donates a hydrogen bond. Because the hydrocarbon part (CH3CH2–) is small, the molecule is polar enough to mix completely with water in all proportions.
How do I make a 1 M ethanol solution?
Weigh 46.07 g of pure ethanol (or measure 58.4 mL using density 0.789 g/mL) and transfer to a 1 L volumetric flask. Add distilled water to the mark, mix well. The calculator above gives the concentration directly if you enter the mass and volume.
Is ethanol a polar or nonpolar molecule?
Ethanol is polar. The C–O and O–H bonds are polar, and the molecule has an asymmetric shape, giving it a net dipole moment. This polarity explains its solubility in water and its ability to dissolve many ionic and polar compounds, though it also dissolves nonpolar substances due to its ethyl group.
What is the molar mass of ethanol in g/mol?
The molar mass is 46.07 g/mol, calculated from the atomic weights: 2×12.011 (C) + 6×1.008 (H) + 15.999 (O) = 46.069 g/mol, rounded to 46.07 g/mol. This is the mass of one mole of ethanol molecules.
Can ethanol be used as an antiseptic?
Yes, ethanol is a common antiseptic in concentrations of 60–90% v/v. It denatures proteins and disrupts cell membranes of microorganisms. However, it is not effective against bacterial spores, and it evaporates quickly, so it is often combined with water or other agents.
Related
Formula used
in m | Mass of ethanol | g | 46.07 | 0 in mm | Molar mass | g/mol | 46.07 | 0.001 in v | Final solution volume | mL | 1000 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works